Introducció
Thank you for choosing the RAVEMEN CR600 Bike Front Light. This manual provides essential information for the safe and efficient use of your new bike light. Please read it thoroughly before installation and operation, and retain it for future reference.
Image: The RAVEMEN CR600 Bike Front Light, a compact and durable lighting solution for cyclists.
Contingut del paquet
Assegureu-vos que tots els elements estiguin presents al vostre paquet:
- Llum davantera per a bicicleta RAVEMEN CR600
- Cable de càrrega USB-C
- Wired Remote Button
- Handlebar Mount (with rubber strap)
Image: Diagram showing the CR600 light, quick-release clip, USB-C cable, and wired remote button.
Informació de seguretat
- No mireu directament el feix de llum per evitar lesions oculars.
- Mantenir fora de l'abast dels nens.
- Ensure the light is securely mounted before riding.
- No desmunteu ni modifiqueu la llum.
- Feu servir només el cable USB-C proporcionat per carregar.
- The light may become warm during prolonged use; this is normal.
Configuració
1. Muntatge de la llum
- Attach the Handlebar Mount: Use the rubber strap to securely attach the handlebar mount to your bicycle's handlebar. The mount is designed to fit handlebars from 22.2mm to 35mm in diameter.
- Inseriu la llum: Slide the RAVEMEN CR600 light onto the mount until it clicks securely into place. The quick-release design allows for easy attachment and removal.
- Ajustar la direcció: The illuminating direction can be adjusted horizontally to 3 levels (10 degrees left, 10 degrees front, 10 degrees right) by rotating the light on its movable bracket.
Image: The CR600 light mounted on a handlebar, showcasing its integrated design and quick-release clip. Note: Invert the lens to maintain the T-beam effect if mounting upside down.
Image: Diagram illustrating the horizontal adjustment of the CR600 light beam (10 degrees left, front, or right).
2. Connecting the Wired Remote Button
- Plug the wired remote button into the designated port on the light.
- Secure the remote button to your handlebar using the provided rubber O-ring in a position that is easily accessible while riding.
Image: The wired remote button connected to the CR600 light and secured on a bicycle handlebar, allowing for easy brightness level changes.
Instruccions de funcionament
Encès/Apagat
- To turn on the light, press and hold the power button on the light unit for approximately 1 second.
- To turn off the light, press and hold the power button on the light unit for approximately 1 second.
Changing Brightness Levels and Modes
- Ús del botó d'engegada: While the light is on, short press the power button to cycle through the brightness levels (High, Mid, Low, Eco) and flashing modes (Pulse, Rapid).
- Using the Wired Remote Button: Short press the wired remote button to cycle through the brightness levels and flashing modes.
- Mode d'emergència: Long press the wired remote button to activate maximum output (600lm) for signaling or emergency needs.
- Funció de memòria: The light will remember the last used brightness level or mode when turned back on.
Brightness Levels and Run Time
| Mode | Brillantor (lúmens) | Run Time (Hours) |
|---|---|---|
| Alt | 600 | 1.4 |
| Mitjana | 300 | 2.4 |
| Baixa | 150 | 4.5 |
| Eco | 50 | 11.5 |
| Pulse Flashing | 150 | 26 |
| Intermitent ràpid | 50 | 33 |
| Mode d'emergència | 600 | N/A |
Note: The above data may vary by environment and user conditions.
Image: Visual representation of the CR600's various lighting modes, brightness levels, and corresponding run times.
Carregant
- Connect the provided USB-C cable to the charging port on the light and to a USB power source.
- The power button will glow flashing red during charging and turn steady green when fully charged.
- Battery Runtime Extension: For extended use, the light can be connected to an external power source (e.g., a power bank) via the USB-C port. This provides emergency lighting when the internal battery is low.
Image: The CR600 light connected to an external power bank via its USB-C port, indicating charging status with red (charging) and green (fully charged) lights.
Manteniment
- Neteja: Netegeu la llum amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Emmagatzematge: Store the light in a cool, dry place when not in use. For long-term storage, charge the battery every 3-6 months to maintain battery health.
- Resistència a l'aigua: The CR600 is IPX6 waterproof, meaning it is protected against high-pressure water jets. However, it is not designed for submersion. Ensure the USB-C port cover is securely closed to maintain water resistance.
Image: The CR600 light with water droplets, demonstrating its IPX6 water resistance and durable anodized aluminum housing.
Resolució de problemes
- La llum no s'encén:
- Assegureu-vos que la bateria estigui carregada. Connecteu-la a una font d'alimentació amb el cable USB-C.
- Premeu i manteniu premut el botó d'engegada durant 1 segon per encendre.
- Light does not change modes:
- Assegureu-vos que el llum estigui encès.
- Short press the power button or wired remote button to cycle modes.
- Check if the wired remote button is securely connected.
- Light falls off mount:
- Ensure the handlebar mount is securely fastened to the handlebar.
- Verify the light is fully slid onto the mount and has clicked into place.
- Temps d'execució reduït:
- Battery performance can decrease in cold weather.
- Assegureu-vos que la bateria estigui completament carregada abans d'utilitzar-la.
- Consider using an external power source for longer rides.
Especificacions
| Característica | Detall |
|---|---|
| Nom del model | CR600 |
| Brillantor | 600 lúmens màx |
| Tipus de biga | Anti-Glare T-shaped beam |
| Resistència a l'aigua | IPX6 impermeable |
| Font d'alimentació | USB-C recarregable |
| Material | Alumini, plàstic |
| Pes de l'article | 87 Grams (0.19 lb) |
| Tipus de muntatge | Handlebar Mount (22.2mm to 35mm) |
| Nombre de configuracions | 6 (High, Mid, Low, Eco, Pulse Flashing, Rapid Flashing) + Emergency Mode |
| Interval màxim | 125 metres |
| Components inclosos | Front bike light, USB cable, wired remote button |
Image: Diagram comparing the anti-glare T-shaped beam of the CR600 with a standard beam, highlighting improved visibility and reduced glare for oncoming traffic.
Garantia i Suport
The RAVEMEN CR600 Bike Front Light comes with a 2 any de garantia from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims, technical support, or any questions regarding your product, please contact RAVEMEN customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase ready.
