User Manual for ANCEL BST500 Automotive Battery Load Tester & AD410 PRO OBD2 Scanner

1. Introducció

The ANCEL BST500 Automotive Battery Load Tester and the ANCEL AD410 PRO OBD2 Scanner are professional diagnostic tools designed for vehicle maintenance and troubleshooting. This manual provides comprehensive instructions for the safe and effective operation of both devices, covering their features, setup, testing procedures, and maintenance.

The BST500 is a dedicated battery system tester capable of performing battery health, cranking, charging, and load tests on 12V and 24V lead-acid batteries. It includes a built-in printer for instant test report generation.

The AD410 PRO is an upgraded 2-in-1 OBD2 scanner and battery tester, offering comprehensive OBDII diagnostic functions, including reading and clearing trouble codes, I/M readiness, live data stream, and additional battery health checks.

Image: The ANCEL BST500 Battery System Tester (left) and the ANCEL AD410 PRO OBD2 Scanner (right), showcasing both devices included in the package.

2. Informació de seguretat

Always observe the following safety precautions when operating the ANCEL BST500 and AD410 PRO to prevent personal injury or damage to the devices or vehicle.

• Utilitzeu protecció ocular i roba protectora adequada quan treballeu a prop de bateries de vehicles.
• Assegureu-vos que el vehicle estigui en una zona ben ventilada per dispersar els gasos de la bateria.
• Avoid sparks or open flames near the battery.
• Do not connect the tester to a battery that is visibly damaged or leaking.
• Ensure correct polarity when connecting the battery clamps: Red to positive (+), Black to negative (-). The BST500 features wrong connection protection.
• Keep the devices dry and clean. Do not expose them to moisture or extreme temperatures.
• Refer to your vehicle's service manual for specific safety procedures related to your vehicle's electrical system.

Image: The ANCEL BST500 highlighting its premium-safe clamps with wrong connection protection, loose lead detection, and overload protection features.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• 1 x ANCEL BST500 Automotive Battery Load Tester with built-in printer
• 1 x ANCEL AD410 PRO OBD2 Scanner Battery Tester
• 1 x Manual d'usuari (aquest document)
• 1 x Roll of Thermal Printer Paper (for BST500)
• 1 x JIS Transcoding Table (for BST500)
• 1 x Guia d'inici ràpid
• 1 x Official Protective Case

Image: Illustration of the complete package contents, including the BST500 tester, user manual, thermal paper, protective case, and packing box.

4. Característiques del producte

4.1 ANCEL BST500 Automotive Battery Load Tester

• Prova exhaustiva de la bateria: Performs Battery Health Test, Start-up Load Test, Maximum Work Load Test, and Charging Test.
• Àmplia compatibilitat: Supports 12V and 24V lead-acid batteries (100-2000 CCA), including regular flooded, AGM flat plate, AGM spiral, gel, and deep cycle batteries.
• Multiple Standards: Compatible with CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB battery rating standards.
• Impressora tèrmica integrada: Allows for convenient printing of test results for record-keeping or customer communication.
• Full Color Screen: Bright and easy to read display for clear navigation and result interpretation.
• Fast & Reliable: Equipped with STM 32-bit CPU for quick response and accurate results (99.99% accuracy in 3 seconds).
• Proteccions de seguretat: Features spark-proof reverse polarity protection, wrong connection protection, loose lead detection, and overload protection.
• Suport multi-idioma: Supports English, Polish, German, Spanish, French, and Italian.

Image: The ANCEL BST500 displaying its capabilities for various battery tests, including Battery Health, Start-up Load Test, Charging Test, Max Work Load Test, and Cranking Test.

Image: The ANCEL BST500 showcasing its built-in thermal printer and the type of paper it uses, emphasizing its ability to print test results.

4.2 ANCEL AD410 PRO OBD2 Scanner Battery Tester

• Enhanced OBDII Diagnostic Functions: Reads and clears Diagnostic Trouble Codes (DTCs), views live data stream, I/M readiness status, freeze frame data, O2 sensor test, EVAP system test, and vehicle information.
• Integrated Battery Tester: Performs battery health test, cranking test, and charging test for 6V/12V batteries.
• Interfície fàcil d'utilitzar: Compact design with a 2.8" TFT 262K true color display LCD for clear and easy-to-understand information.
• Cerca DTC: Built-in DTC library for quick code definitions.
• Dades Review: Permet review of recorded diagnostic data.
• Actualitzacions gratuïtes: Provides free lifetime software updates.
• Suport multi-idioma: Supports English, French, Spanish, German, and more.

Image: The ANCEL AD410 PRO displaying its various functions, including OBD2 Diagnosis, Battery Test, I/M Readiness Test, Code Reader, EVAP System Test, DTC Lookup, O2 Sensor Test, Data Management, and Free Updates.

5. Configuració i ús inicial

5.1 ANCEL BST500 Battery Load Tester Setup

1. Prepareu la bateria: Assegureu-vos que els terminals de la bateria estiguin nets i sense corrosió.
2. Connecteu el fitxer Clamps: Connecteu el cl vermellamp al terminal positiu (+) de la bateria i al cl negreamp to the negative (-) battery terminal. The device will power on automatically.
3. Escolliu l'idioma: Si se us demana, seleccioneu l'idioma que preferiu amb els botons de navegació.
4. Inseriu paper tèrmic: Open the printer cover on the BST500 and insert the thermal paper roll, ensuring the paper feeds out correctly. Close the cover.

Imatge: Una imatge detallada view of the ANCEL BST500, showing its screen displaying "MAIN MENU" and a printed test report emerging from the top, indicating its built-in printer functionality.

5.2 ANCEL AD410 PRO OBD2 Scanner Setup

1. Localitza el port OBD-II: Identify the 16-pin OBD-II diagnostic port in your vehicle, usually located under the dashboard on the driver's side.
2. Connecteu l'escàner: Plug the AD410 PRO's OBD-II connector into the vehicle's OBD-II port. The device will power on automatically.
3. Escolliu l'idioma: Si se us demana, seleccioneu l'idioma que preferiu amb els botons de navegació.

Imatge: Un primer pla view of the ANCEL AD410 PRO OBD2 Scanner, showing its display screen with menu options like OBDII, I/M, BAT, Lookup, Review, and Setup, along with its navigation buttons and OBD-II connector.

6. Instruccions de funcionament

6.1 Using the ANCEL BST500 Battery Load Tester

The BST500 offers various battery and system tests. Navigate the menu using the UP/DOWN arrows and press ENTER to select.

1. Battery Health Test (BATT CAPACITY):
   • From the main menu, select "1. BATT CAPACITY".
   • Input the battery's CCA (Cold Cranking Amps) rating as specified on the battery label.
   • The tester will display results including Voltage, Internal Resistance (IR), State of Charge (SOC), and State of Health (SOH).
   • The result will indicate "Good", "OK", "Attention", or "Replace".
   

   Image: The BST500 displaying results for Battery Health (Voltage, SOH, CCA Value, IR) and Charging System tests, showing detailed diagnostic information.

2. Start-up Load Test (START-UP LOAD):
   • From the main menu, select "2. START-UP LOAD".
   • Follow the on-screen prompts to start the vehicle engine. The tester will automatically record the lowest voltage during the cranking process.
   • L'estàndard voltage for a 12V system is 9.6V; for a 24V system, it is 16V. The test determines if the starting system is functioning correctly.
   

   Image: The BST500 performing an Engine System Activation Load Test, showing the main menu and the resulting voltage readings during engine start-up.

3. Maximum Work Load Test (MAX WORK LOAD):
   • From the main menu, select "3. MAX WORK LOAD".
   • This test assesses the battery's ability to handle maximum discharge.
   • For a 12V system, the standard voltage is 12.8V; for a 24V system, it is 25.6V. The test helps identify issues with the battery's capacity under load.
   

   Image: The BST500 conducting a Maximum Load System Test, illustrating the main menu and the voltage parameters for 12V and 24V systems to determine battery performance under load.
4. Charging Test (CHARGE SYSTEM):
   • From the main menu, select "4. CHARGE SYSTEM".
   • This test evaluates the vehicle's charging system (alternator).
   • The tester will detect changes in battery voltage to determine if the alternator is functioning correctly.
   

   Image: The BST500 performing a Charging System Test, showing the main menu and the expected voltage ranges (Max, Volt, Min) to assess the alternator's condition.

5. Printing Test Reports:
   • After completing a test, the BST500 will often prompt if you wish to print the report. Press ENTER to confirm.
   • You may be asked to set the date and report number before printing.
   • The built-in thermal printer will then print a detailed report of the test results.
   

   Image: A three-step guide demonstrating how to print a test report using the ANCEL BST500, from inquiring to setting details and finally printing.

6.2 Using the ANCEL AD410 PRO OBD2 Scanner

The AD410 PRO provides comprehensive OBDII diagnostics. Navigate the menu using the UP/DOWN arrows and press ENTER to select.

1. OBDII Diagnostics:
   • Select "OBDII" from the main menu.
   • This mode allows you to read and clear DTCs, view live data, freeze frame data, and perform other standard OBDII functions.
   • To read codes, select "Read Codes". To clear codes, select "Erase Codes" (ensure the ignition is on, engine off, before clearing codes).
2. Preparació I/M:
   • Select "I/M" from the main menu.
   • This function checks the readiness of the emission-related monitors, indicating if the vehicle is ready for a smog test.
3. Battery Test (BAT):
   • Select "BAT" from the main menu.
   • This allows you to perform a quick battery health check, cranking test, and charging test for 6V/12V batteries.
4. Cerca DTC:
   • Select "Lookup" from the main menu.
   • Enter a Diagnostic Trouble Code (DTC) to view la seva definició.
5. Review Dades:
   • Select "Review" from the main menu.
   • Access previously recorded diagnostic data for analysis.
6. Configuració:
   • Select "Setup" from the main menu.
   • Configure device settings such as language, unit of measure, and display brightness.

7. Compatibilitat

The ANCEL BST500 and AD410 PRO are designed for broad compatibility:

• Battery Types (BST500): Regular flooded, AGM flat plate, AGM spiral, gel, and deep cycle batteries.
• Voltage (BST500): 12V and 24V lead-acid batteries.
• Battery Capacity (BST500): 100 to 2000 CCA.
• Voltage (AD410 PRO): 6V and 12V batteries.
• Vehicle Types: Both devices are suitable for a wide range of 12V and 24V vehicles, including motorcycles, cars, trucks, and tractors.

Image: An illustration showing the various battery types compatible with the ANCEL BST500, including Regular-flooded, AGM Flat Plate, AGM Spiral, GEL, and EFB batteries, for both 12V and 24V systems.

Image: Visual representation of vehicle types that the ANCEL BST500 can test, including motorcycles, cars (12V), trucks, and tractors (24V).

8. Manteniment

Proper maintenance ensures the longevity and accuracy of your ANCEL devices:

• Neteja: Utilitzeu un suau, damp cloth to clean the device's exterior. Do not use abrasive cleaners or solvents.
• Emmagatzematge: Store the devices in their protective case in a dry, cool environment, away from direct sunlight and extreme temperatures.
• Cura del cable: Inspect cables and connectors regularly for damage. Do not pull on the cables to disconnect.
• Software Updates (AD410 PRO): Regularly check for and install software updates from the ANCEL official website to ensure optimal performance and compatibility with new vehicle models.
• Thermal Paper (BST500): Replace the thermal paper roll when it runs out. Use only compatible thermal paper.

9. Solució De Problemes

Si teniu problemes, consulteu els següents problemes i solucions habituals:

If you cannot resolve the issue using the above table, please contact ANCEL technical support.

10. Especificacions

11. Garantia i Suport

ANCEL is committed to providing high-quality products and customer satisfaction.

• Devolucions: Enjoy 30-day free returns.
• Suport tècnic: 24/7 technical support is available to assist you with any operational or technical queries.
• Innovació: ANCEL has 10 years of innovation in the automotive diagnostic field.
• Customer Choice: Trusted by over 10 million customers worldwide.

For support, please visit the official ANCEL website or contact their customer service team directly. Contact information can typically be found on the product packaging or the ANCEL brand store page.

Image: A visual representation of ANCEL's professional technical service team, highlighting 30-day free returns, 24/7 tech support, 10 years of innovation, and 10M+ customer choice.