Manuals+

Brandmotion 9002-3010

Brandmotion Universal 4-Sensor Parking Sensor System

Model: 9002-3010

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Brandmotion Universal 4-Sensor Switchable Front or Rear Parking Sensor System (Model 9002-3010). This system is designed to assist drivers in avoiding common parking accidents by providing distance detection and audible alerts.

2. Informació de seguretat

Always exercise caution when parking. This system is an aid and should not replace careful driving and visual inspection of your surroundings. Ensure all connections are secure and properly insulated to prevent electrical hazards. Professional installation is recommended for optimal safety and performance.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

  • 4 Ultrasonic Sensors
  • Unitat de visualització LED
  • Unitat d'altaveus
  • Unitat de control electrònic (ECU)
  • Sensor Harness (4 feet)
  • Switch Cable (5 feet)
  • Speaker Cable (5 feet)
  • Body Harness (8 feet)
  • Display Extension Cable (8 feet)
  • Mounting Hardware (as applicable for tape-in/drill-in)

4. Configuració i instal·lació

The Brandmotion 9002-3010 system can be installed on either the front or rear of your vehicle. It is compatible with both steel and plastic bumpers. Professional installation is highly recommended. DIY installation typically takes 180-240 minutes, while professional installation is estimated at 120-180 minutes.

4.1 Muntatge del sensor

  • Plastic Bumpers: Sensors are designed for rear tape-in mounting.
  • Metal Bumpers: Sensors are designed for front drill-in mounting.
  • Consult an automotive paint technician if you wish to customize the sensor color.
Four black parking sensors with wiring

Imatge 1: Ex.ample of the four ultrasonic parking sensors. These sensors are designed for flush mounting into the vehicle's bumper.

4.2 Connexions de cablejat

  1. Connect the 4' Sensor Harness from the body harness to the driver side sensor.
  2. Connect the 5' Switch Cable to the Electronic Control Unit (ECU).
  3. Connect the 5' Speaker Cable to the ECU.
  4. Connect the 8' Body Harness from the ECU to the vehicle's power source and other necessary connections.
  5. Connect the 8' Display Extension Cable to the LED Display Unit and the ECU.
Electronic Control Unit (ECU) for the parking sensor system

Image 2: The Electronic Control Unit (ECU) with a barcode label F20230801218. This unit processes sensor data and controls the display and speaker.

5. Instruccions de funcionament

Once installed, the parking sensor system provides visual and audible feedback to assist with parking maneuvers.

5.1 LED Display Unit

LED display unit showing '2.8' and color-coded distance indicators

Image 3: The LED display unit. It shows numerical distance to an object and uses color-coded segments (green, yellow, red) to indicate proximity.

  • The display shows the distance to the nearest object numerically.
  • Color-coded segments (green, yellow, red) illuminate to visually represent proximity. Green indicates a safe distance, yellow indicates caution, and red indicates very close proximity.

5.2 Audible Alert Speaker

Speaker unit with 'Off Lo Hi' switch, part of a larger display and speaker assembly

Image 4: The speaker unit, visible as part of the display assembly. It features a switch with 'Off', 'Lo' (Low), and 'Hi' (High) volume options.

  • The speaker emits an audible alert that increases in frequency as your vehicle approaches an object.
  • The speaker unit features a switch with "Off", "Low", and "High" volume options to suit user preference.

6. Manteniment

To ensure optimal performance and longevity of your parking sensor system:

  • Keep sensors clean from dirt, snow, ice, and debris. Obstructions can lead to inaccurate readings.
  • Comproveu periòdicament totes les connexions del cablejat per verificar la seguretat i si hi ha signes de desgast.
  • Avoid using harsh chemicals or abrasive materials when cleaning the sensors or display unit.

7. Solució De Problemes

If you experience issues with your parking sensor system, refer to the following common problems and solutions:

ProblemaCausa possibleSolució
Inconsistent or False Alerts
  • Els sensors estan bruts o obstruïts.
  • Heavy rain or snow.
  • Interference from other vehicle systems.
  • Improper sensor angle/installation.
  • Clean sensors thoroughly.
  • System performance may be affected by severe weather.
  • Ensure proper grounding and wiring.
  • Verify sensors are flush and correctly angled.
No Display or Audible Alert
  • Problema de connexió elèctrica.
  • Connexions de cable soltes.
  • Speaker volume set to "Off".
  • Check power supply to the ECU.
  • Inspect all harness and cable connections.
  • Adjust speaker volume switch to "Lo" or "Hi".
Display Shows Incorrect Distance
  • Obstrucció del sensor.
  • Sensor danyat.
  • Clear any obstructions from sensors.
  • Contact support if a sensor is suspected to be faulty.

8. Especificacions

  • Model: 9002-3010
  • Tipus de sensor: 4 Ultrasonic Sensors
  • Funcionament: Front or Rear (Switchable)
  • Visualització: High-Quality LED, Numerical and Color-Coded
  • Alertes: Audible, increasing frequency with proximity
  • Opcions d'altaveu: Apagat, Baix, Alt
  • Sensor Harness Length: 4 peus
  • Switch Cable Length: 5 peus
  • Longitud del cable de l'altaveu: 5 peus
  • Body Harness Length: 8 peus
  • Display Extension Cable Length: 8 peus
  • UPC: 819779022409
  • Dimensions del producte (embalatge): 9.75 "L x 7.25" W x 2.5" H
  • Product Weight (Packaging): 1.65 lliures

9. Garantia i Suport

For warranty information or technical support, please contact Brandmotion customer service. Keep your proof of purchase for warranty claims.

Brandmotion Contact: Refer to the official Brandmotion weblloc web o l'embalatge del producte per obtenir la informació de contacte més actualitzada.

Recursos en línia: Visit the Brandmotion Store on Amazon

Documents relacionats - 9002-3010

Preview BRANDMOTION 9002-3010 Parking Sensor System Installation Guide
Comprehensive installation guide for the BRANDMOTION 9002-3010 Parking Sensor System. Covers front and rear bumper installation for plastic and metal bumpers, detailed wiring instructions, and system functionality for enhanced vehicle safety.
Preview Brandmotion Ultrasonic Rear Park Aid Truck Extended Length Harness Installation (Kit # 9002-3001)
Official installation instructions for the Brandmotion Ultrasonic Rear Park Aid (RPA) Truck extended length harness, kit number 9002-3001. Includes safety precautions and step-by-step guidance.
Preview Brandmotion Application Guide: Vehicle Compatibility for Rear Vision and Mirror Systems
The Brandmotion Application Guide provides essential compatibility information for automotive rear vision systems, auto-dimming mirrors, and related accessories. This guide helps users find the correct Brandmotion products for specific vehicle makes, models, and years, ensuring seamless integration and enhanced vehicle safety and convenience.
Preview Instruccions d'instal·lació de la càmera CMOS universal de muntatge dual per infrarojos Brandmotion (kit 9002-7611)
Guia d'instal·lació detallada per al kit de càmera CMOS universal de muntatge dual per infrarojos Brandmotion 9002-7611, que inclou la llista de peces, les eines necessàries, les precaucions de seguretat i les instruccions pas a pas per al muntatge i el cablejat.
Preview Brandmotion 9002-7601 Dual Mount Universal CMOS Camera Installation Instructions
Detailed installation instructions for the Brandmotion 9002-7601 Dual Mount Universal CMOS Camera, including kit contents, tools needed, safety precautions, wiring options, and step-by-step guidance for mounting, wiring, and testing.
Preview Brandmotion Rear Vision Application Guide: Cameras & Mirrors
Comprehensive application guide from Brandmotion detailing compatible rear-view cameras, mirrors, and related accessories for a wide range of vehicle makes and models.