Manual d'usuari del transmisor d'àudio DS18 RKS-BT amb interruptor basculant marí Bluetooth impermeable

1. Acabatview

The DS18 RKS-BT is a waterproof Bluetooth marine rocker switch audio streamer designed for seamless integration into marine, UTV, ATV, truck, and other powersports audio systems. This compact unit provides convenient control over your audio streaming directly from a rocker switch panel, eliminating the need for a full head unit. It features a built-in wireless Bluetooth audio receiver and stereo 2.5V pre-out RCA outputs for high-quality audio.

Figura 1.1: Frontal view of the DS18 RKS-BT Waterproof Bluetooth Marine Rocker Switch Audio Streamer.

2. Característiques clau

• Integrated Bluetooth Audio Streaming: Built-in wireless Bluetooth audio receiver for streaming music from your compatible devices.
• Universal Rocker Switch Mount: Designed to fit standard rocker switch panels for easy installation.
• Disseny impermeable: IPX6 water resistance rating ensures durability in marine and outdoor environments.
• Pre-Out RCA: Stereo 2.5V pre-out RCA outputs for connecting to an ampmés viu.
• Entrada auxiliar: Includes a 3.5mm auxiliary input port for wired audio connections.
• AmpControl de lifier: Features a remote turn-on wire to activate your ampmés viu.
• Botons retroil·luminats: Easy-to-use blue backlit silicone buttons for visibility in low-light conditions.
• Circuit de protecció: Integrated power wiring harness with overload and power protection.

Figure 2.1: Visual representation of key features including voltage operation, frequency response, and stereo pre-out RCA.

3. Configuració i instal·lació

The RKS-BT is designed for straightforward installation into a standard rocker switch panel. Ensure all power is disconnected before beginning installation.

3.1 Connexions de cablejat

1. Power (Yellow Wire): Connect the yellow wire to a constant 12V DC power source. This provides continuous power to the unit.
2. Terra (cable negre): Connect the black wire to a reliable chassis ground point.
3. Ignition/Accessory (Red Wire): Connect the red wire to a switched 12V DC source (e.g., ignition or accessory circuit) that turns on and off with your vehicle/vessel.
4. Remote Turn-On (Blue Wire): Connect the blue wire to the remote input of your amplifier. This will turn on the amplifier when the RKS-BT is powered on.
5. Sortides RCA: Connect the white and red RCA cables to the corresponding left and right audio inputs on your ampmés viu.
6. Entrada auxiliar: If using a wired audio source, connect it to the 3.5mm auxiliary input port using the provided cable.

Figure 3.1: The DS18 RKS-BT wiring harness showing power, ground, remote, and RCA connections.

Figure 3.2: Detailed wiring diagram illustrating connections for RCA line out, Aux line input, and integrated power wiring harness.

3.2 Muntatge

The RKS-BT is designed to snap into a standard rocker switch opening. Ensure the opening dimensions are compatible with the unit's size (Overall Length: 1.1" / 28mm, Overall Height: 2" / 51mm, Overall Depth: 2.8" / 72mm).

Figure 3.3: The DS18 RKS-BT integrated into a vehicle's dashboard alongside other rocker switches.

3.3 Vídeo d'instal·lació

For a visual guide on installation and features, please refer to the official product video below:

4. Instruccions de funcionament

The RKS-BT features intuitive controls for managing your audio experience.

4.1 Encès/Apagat

• Encès: Premeu el botó d'engegada (⑂) briefly. The blue backlighting will illuminate, and the unit will begin blinking, indicating it is searching for a Bluetooth device.
• Apagar: Manteniu premut el botó d'encesa (⑂) for approximately 3 seconds until the backlighting turns off. This will completely shut down the unit.

4.2 Vinculació Bluetooth

• When powered on, the RKS-BT will automatically enter pairing mode (blue lights blinking).
• On your mobile device, navigate to Bluetooth settings and select "DS18 RKS-BT" from the list of available devices.
• Once successfully paired, the blue lights on the RKS-BT will stop blinking and remain solid.
• The unit will automatically attempt to reconnect to the last paired device when powered on.

4.3 Control d'àudio

• Reproduir/pausa: Premeu el botó Reprodueix / Pausa (⏸) per iniciar o pausar la reproducció d'àudio.
• Pista següent: Premeu el botó Pista següent (⏭) to skip to the next song.
• Pista anterior: Premeu el botó Pista anterior (⏮) to go back to the beginning of the current song or to the previous song.
• Pujar el volum: Press the Plus button (+) to increase the volume.
• Baixar el volum: Press the Minus button (-) to decrease the volume.

Figura 4.1: Primer pla view of the RKS-BT control buttons, including power, play/pause, track skip, and volume controls.

5. Manteniment

The DS18 RKS-BT is designed for durability in harsh environments. Regular maintenance will ensure its longevity and optimal performance.

• Neteja: Netegeu la unitat amb un suau, damp drap per eliminar la brutícia i la pols. Eviteu utilitzar productes químics agressius o netejadors abrasius.
• Inspecció: Periodically inspect all wiring connections for corrosion or damage. Ensure all connections are secure.
• Exposició a l'aigua: While waterproof (IPX6 rated), avoid prolonged submersion or high-pressure water jets directly on the unit to prevent potential damage over time.

6. Solució De Problemes

7. Especificacions

8. Garantia i Suport

For warranty information, technical support, or further assistance with your DS18 RKS-BT, please contact DS18 customer service directly. Refer to the official DS18 weblloc web o l'embalatge del producte per obtenir les dades de contacte més actualitzades.

DS18 Weblloc: www.ds18.com