1. Introducció
The Adamson B10 Aqua Cooling System is designed to enhance sleep comfort by providing a cooled mattress surface. Utilizing a chilled water flow through high-grade silicone tubes, this system helps regulate body temperature, reducing discomfort from hot flashes and night sweats. This manual provides essential information for the safe and effective use and maintenance of your B10 cooling system.
Característiques principals:
- Refrigeració efectiva: Reduces mattress temperature by 7 to 12 °F using evaporative cooling.
- Disseny segur: Operates without electric wires or electromagnetic waves in the mattress pad.
- Material còmode: Mattress pad made from 100% cotton for a soft sleeping surface.
- Eficient energètic: Consumes significantly less energy (8 Wh) compared to standard air conditioning units.
- Fàcil d'utilitzar: Features 4 modes, adjustable fan speed, and remote control for convenience.
2. Instruccions de configuració
Follow these steps to set up your Adamson B10 Aqua Cooling System:
- Place the Mattress Pad: Lay the 100% cotton mattress pad (Twin size: 75” L x 39” W) directly on your mattress. Ensure it is positioned where you desire cooling. The pad can be placed vertically or horizontally depending on your preference.
- Position the Control Unit: Place the Adamson B10 control unit on a stable surface, such as a nightstand, at the same level or higher than the mattress pad for proper water flow.
- Connecteu les mànegues: Connect the two hoses from the mattress pad to the designated ports on the control unit. Ensure connections are secure to prevent leaks.
- Omplir el dipòsit d'aigua: Open the water inlet on the control unit and fill it with approximately 1/2 gallon (2 liters) of clean water. Do not exceed the MAX fill line. For initial use, you may need to refill the tank after the system circulates water into the mattress pad.
- Connexió d'alimentació: Connecteu el cable d'alimentació de la unitat de control a una presa de corrent adequada.
Guia de vídeo de configuració
Video 2.1: Adamson B10 Bed Cooling System Overview. This video demonstrates the basic setup and function of the cooling system, showing the control unit and mattress pad in a bedroom setting.
Video 2.2: Adamson B10 Bed Cooling System Setup. This video provides a visual guide to connecting the mattress pad to the control unit and preparing the system for use.
Video 2.3: Product Use Video. This video illustrates the process of connecting the pad, filling the water tank, and activating the cooling system.
Video 2.4: Water Cooling Mattress Pad Setup. This video demonstrates the connection of the water pipes to the mattress pad and the control unit, along with water filling.
3. Instruccions de funcionament
Once the system is set up and the water tank is filled, you can begin operating your Adamson B10 Aqua Cooling System.
Tauler de control i comandament a distància
The control unit features an intuitive panel with buttons for On/Off, Fan Speed, Fan Cycle, Timer, and Negative Ion. A wireless remote control is also included for convenient adjustments from your bed.
Funcions:
- On/Off: Premeu per encendre o apagar la unitat.
- Velocitat del ventilador: Adjust the fan speed to control the intensity of cooling. The unit offers 4 modes.
- Fan Cycle: Utilize this feature to cycle the fan on and off at intervals, optimizing cooling and energy use.
- Temporitzador: Set a timer for automatic shut-off, allowing you to customize your cooling duration.
- Ió negatiu: Activate the negative ion function for potential air purification benefits.
The system circulates chilled water through the mattress pad, providing a consistent cooling effect. Experiment with different fan speeds and cycle settings to find your preferred comfort level.
4. Manteniment
Regular maintenance ensures the longevity and optimal performance of your Adamson B10 Aqua Cooling System.
Gestió de l'aigua:
- Ompliment: The water level in the tank will decrease over time due to circulation and evaporation. Refill the tank with clean water as needed, typically every 1-2 nights depending on usage.
- Neteja: To prevent mineral buildup and maintain hygiene, it is recommended to clean the water tank and circulation system regularly. You may add a small amount of white vinegar to the water during refills to help prevent mineral buildup. Caution: Never mix vinegar with bleach.
- Drenatge: When not in use for extended periods, drain the water from the system. Remove the nozzle at the base of the control unit to drain the water.
Mattress Pad Care:
- The 100% cotton mattress pad is designed for comfort. For cleaning, follow the care instructions: Només neteja en sec.
- Periodically hang the mattress pad to allow any residual water to fully drain and air dry.
Maintenance Video Guide
Video 4.1: Adamson B10 Bed Cooling System Maintenance. This video demonstrates how to properly drain the unit and care for the mattress pad.
5. Solució De Problemes
If you encounter any issues with your Adamson B10 Aqua Cooling System, refer to the following common solutions:
- No Cooling/Reduced Cooling:
- Check the water level in the control unit. Refill if low.
- Ensure all hose connections are secure and free from kinks or blockages.
- Verify the control unit is powered on and the desired temperature/fan speed is set.
- La unitat no s'encén:
- Confirm the power cord is securely plugged into both the unit and the electrical outlet.
- Comproveu si la presa de corrent funciona connectant-hi un altre dispositiu.
- Soroll inusual:
- Assegureu-vos que la unitat estigui col·locada sobre una superfície plana i estable.
- Comproveu si hi ha obstruccions al voltant de les reixetes de ventilació del ventilador.
- Adjust the fan speed; lower speeds typically produce less noise.
- Fuga d'aigua:
- Apagueu i desconnecteu immediatament la unitat.
- Inspect all hose connections for tightness.
- Check the water tank for cracks or improper sealing of the lid.
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
6. Especificacions
| Característica | Detall |
|---|---|
| Marca | Adamson |
| Nom del model | Adamson B10 |
| Color | Aqua |
| Mida | Twin (75” L x 39” W) |
| Material | 100% Cotton (Mattress Pad) |
| Característiques especials | Water Cooling System, 4 modes, Fan Speed Adjustable, Remote Control |
| Instruccions de cura del producte | Només neteja en sec |
| Dimensions de la unitat de control | 11.6 x 8.2 x 6.6 polzades |
| Item Weight (Control Unit) | 2.77 lliures |
7. Garantia i Suport
The Adamson B10 Aqua Cooling System comes with a 5-Year Assurance, reflecting our commitment to quality and customer satisfaction. For any questions, concerns, or technical assistance, our dedicated Atenció al client 24/7 team is available to help you.
Please refer to your product packaging or the official Adamson website for specific contact details and warranty claim procedures.
