Manual d'instruccions del subwoofer dual de 4 ohms DD Audio 1112-D4 de 12 polzades

Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your DD Audio 1112-D4 12-inch Dual 4-Ohm Subwoofer. Please read it thoroughly before use to ensure optimal performance and longevity of your product. Adhering to these guidelines will help you achieve the best possible audio experience.

Producte acabatview

The DD Audio 1112-D4 is a 12-inch subwoofer engineered for high-fidelity audio reproduction in car audio systems. It features a dual 4-ohm voice coil configuration, providing flexible wiring options to match various amplifier setups. As part of the 1100 Series, this subwoofer is designed for efficiency and sound quality, making it suitable for both sealed and small vented enclosures. Its Hi-Def Tuned suspension system contributes to its performance characteristics.

Imatge 1: Frontal view of the DD Audio 1112-D4 subwoofer, showcasing the black cone with the red DD Audio logo at its center.

Especificacions tècniques

Nota: All specifications are subject to change without notice. Performance may vary based on installation and environmental factors.

Configuració i instal·lació

Proper installation is crucial for the performance and longevity of your subwoofer. If you are unsure about any steps, it is recommended to seek professional installation.

1. Precaucions de seguretat

• Disconnect the vehicle's battery before starting any electrical work to prevent electrical shorts or damage.
• Utilitzeu l'equip de seguretat adequat, inclosa la protecció ocular, durant la instal·lació.
• Ensure all wiring is correctly gauged for the power levels and properly fused to protect the system.

2. Enclosure Selection and Construction

The DD Audio 1112-D4 is designed to perform optimally in specific enclosure volumes:

• Sealed Enclosure Volume: 0.8 - 1.5 peus cúbics
• Ported Enclosure Volume: 0.8 - 1.75 peus cúbics

Ensure the enclosure is robust, airtight (for sealed designs), and properly braced to prevent rattles and vibrations that can degrade sound quality.

Imatge 2: Lateral view of the DD Audio 1112-D4 subwoofer, highlighting the cone and flexible surround components.

3. Wiring the Dual 4-Ohm Voice Coils

The 1112-D4 features dual 4-ohm voice coils, offering flexibility in wiring configurations to match your amplifier's impedance requirements. Always verify your amplifier's stable impedance range before wiring.

• Cablejat en paral·lel (2 ohms): Connect the positive terminals of both voice coils together, and the negative terminals of both voice coils together. Then connect these combined positive and negative terminals to your amplifier. This configuration presents a 2-ohm load to the ampmés viu.
• Cablejat en sèrie (8 ohms): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Then connect the remaining positive and negative terminals to your amplifier. This configuration presents an 8-ohm load to the ampmés viu.

Warning: Incorrect impedance matching can damage your amplifier or subwoofer. Consult your amplifier's manual for compatible load impedances.

Imatge 3: Anglesa view of the DD Audio 1112-D4 subwoofer, illustrating the dual voice coil terminals for wiring connections.

4. Muntatge del subwoofer

• Ensure the mounting surface within the enclosure is flat and secure.
• Use appropriate screws and ensure a tight, airtight seal between the subwoofer frame and the enclosure to prevent air leaks.
• The mounting diameter required is 10.937 inches, and the mounting depth is 5.8 inches. Verify these dimensions against your enclosure design.

Pautes de funcionament

1. Maneig de potència

The DD Audio 1112-D4 has a recommended RMS power range of 200-400 watts and a peak power handling of 800 watts. It is crucial to match your amplifier's output to these specifications. Underpowering can be as damaging as overpowering, as it can lead to amplifier clipping and excessive distortion, which can damage the subwoofer.

2. AmpConfiguració del lifier

• Configuració de guany: Estableix el ampguany del lificador correctament per coincidir amb el volum de sortidatage of your head unit. The gain control is not a volume knob; it should be set to prevent clipping and distortion at maximum desired listening levels.
• Filtre de pas baix (LPF): Configura l'LPF al teu amplifier or head unit to filter out frequencies above the subwoofer's intended range, typically between 60Hz and 100Hz. This ensures the subwoofer only reproduces bass frequencies.
• Filtre subsònic (HPF): Si el teu amplifier has a subsonic filter, set it to protect the subwoofer from playing frequencies below its resonant frequency (Fs: 35Hz), usually around 25-30Hz. This prevents wasted power and potential damage from extreme low-frequency excursions.

3. Període de rodatge

Allow a break-in period of approximately 10-20 hours of moderate listening before operating the subwoofer at high volumes. This allows the suspension components (surround and spider) to loosen up and reach their optimal performance characteristics, improving sound quality and longevity.

Manteniment

• Neteja: Use a soft, dry cloth to gently clean the subwoofer cone and surround. Avoid using harsh chemicals, solvents, or excessive moisture, which can damage the materials.
• Inspecció: Periodically inspect all wiring connections for tightness and signs of corrosion. Check the subwoofer surround and cone for any signs of physical damage, tears, or deterioration.
• Factors ambientals: Protect the subwoofer from extreme temperatures, direct sunlight, and moisture. These conditions can degrade materials and affect performance over time.

Imatge 4: Angle posterior view of the DD Audio 1112-D4 subwoofer, displaying the robust motor structure and ventilation for heat dissipation.

Resolució de problemes

If you experience issues with your subwoofer, consult the following common problems and solutions:

• Sense so:
  • Check all wiring connections (power, ground, remote, RCA, speaker wires) for proper connection and continuity.
  • Verifiqueu el amplifier is powered on (check its power indicator light).
  • Check fuses on the amplifier and the main power wire.
  • Ensure the head unit is sending an audio signal to the ampmés viu.
• So distorsionat:
  • Reduir amplifier gain to prevent clipping.
  • Check for proper LPF and subsonic filter settings.
  • Ensure the subwoofer is not over-excursion (playing too loud for its capabilities).
  • Inspect the subwoofer cone and surround for physical damage.
• Greus febles:
  • Verificar amplifier gain and LPF settings are optimized.
  • Check for correct wiring impedance matching between the subwoofer and ampmés viu.
  • Ensure the enclosure is sealed properly (if applicable) and free of air leaks.
  • Confirm the phase setting on the amplifier or head unit is correct.
• Subwoofer Overheating:
  • Assegureu-vos una ventilació adequada al voltant ampmés viu.
  • Check for correct impedance matching; an impedance too low can cause overheating.
  • Avoid prolonged operation at maximum volume, especially during the break-in period.

If these steps do not resolve the issue, contact DD Audio customer support or a qualified car audio technician for further assistance.

Garantia i Suport

Informació de la garantia

This DD Audio 1112-D4 subwoofer comes with a Garantia limitada. The specific terms, conditions, and duration of the warranty are provided by DD Audio. Please refer to the official DD Audio website or your purchase documentation for complete warranty details. It is essential to retain your proof of purchase for any warranty claims.

Atenció al client

For technical assistance, warranty inquiries, or further product information, please visit the official DD Audio website. Contact details for their customer support department are typically available on the manufacturer's weblloc.