X-PRO 150cc Moped Street Gas Moped Instruction Manual

1. Introducció

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your X-PRO 150cc Moped Street Gas Moped, Model Fiji 150. Please read this manual thoroughly before assembly and operation to ensure proper use and to prevent damage or injury.

Figure 1: X-PRO 150cc Moped Street Gas Moped (Blue model shown).

2. Muntatge i muntatge

Your X-PRO Fiji 150 Moped requires some assembly upon arrival. Follow these steps carefully. Refer to the assembly video for visual guidance.

2.1 Unboxing and Frame Removal

The moped is shipped securely within a metal frame and cardboard box. Carefully remove the outer packaging.

Figure 2: Moped secured within its metal shipping frame.

Use appropriate tools to carefully unbolt and remove the metal frame surrounding the moped. Ensure the moped is stable before proceeding.

2.2 Instal·lació del manillar

The handlebar assembly needs to be attached to the steering column. Ensure all cables and wires are routed correctly and not pinched.

2.3 Front Wheel and Fender Assembly

Install the front wheel, ensuring the brake caliper aligns correctly with the disc. Attach the front fender securely.

2.4 Connexió de la bateria

Locate the battery compartment, typically under the floorboard. Connect the positive (red) and negative (black) terminals to the battery. Ensure connections are tight and secure.

2.5 Mirror Installation

Instal·leu la part posteriorview mirrors into their designated mounting points on the handlebar. Adjust for optimal visibility.

2.6 Rear Rack Installation

Attach the rear rack to the designated mounting points at the rear of the moped. Ensure all bolts are tightened securely.

2.7 Guia de vídeo de muntatge

For a comprehensive visual guide on the assembly process, please watch the official X-PRO Fiji 150 Scooter Assembly Video:

3. Instruccions de funcionament

Familiarize yourself with the moped's controls before riding. Always wear appropriate safety gear, including a helmet.

3.1 Comprovacions prèvies a la conducció

• Pneumàtics: Comproveu la pressió i l'estat dels pneumàtics.
• Frens: Proveu els frens davanters i posteriors per a un bon funcionament.
• Llums: Verify headlights, taillights, and turn signals are working.
• Combustible: Ensure sufficient fuel level. Use recommended fuel type.
• Oli: Comproveu el nivell d'oli del motor.

3.2 Starting the Moped

1. Introduïu la clau al contacte i gireu-la a la posició "ON".
2. Ensure the kill switch is in the 'RUN' position.
3. Apply the brake lever (either front or rear).
4. Press the electric start button. If the engine does not start, try using the kick-start lever.

3.3 Riding the Moped

Once the engine is running, slowly twist the throttle grip to accelerate. Release the throttle to decelerate. Use the brake levers to stop. Practice in a safe, open area before riding in traffic.

4. Manteniment

Regular maintenance is crucial for the longevity and safe operation of your moped.

4.1 Comprovacions rutinàries

• Canvi d'oli: Change engine oil every 500-1000 miles or as recommended in the full owner's manual.
• Pressió dels pneumàtics: Check weekly. Refer to the tire sidewall for recommended pressure.
• Líquid de frens: Check fluid level monthly. Top up if necessary with recommended fluid.
• Cadena/Cinturó: Inspect for proper tension and lubrication (if applicable).
• Bujía: Inspeccioneu i netegeu o substituïu segons calgui.

4.2 Neteja i emmagatzematge

Clean your moped regularly with mild soap and water. Avoid high-pressure washers on electrical components. When storing for extended periods, ensure the fuel tank is full (to prevent condensation) and the battery is disconnected or on a trickle charger.

5. Solució De Problemes

This section addresses common issues you might encounter with your moped.

5.1 Engine Won't Start

• Sense combustible: Comproveu el nivell de combustible.
• Interruptor de mort: Ensure it's in the 'RUN' position.
• Bateria: Comproveu les connexions de la bateria i el nivell de càrrega.
• Bujía: Inspect for fouling or damage.

5.2 Poor Performance

• Low Tire Pressure: Inflate tires to recommended levels.
• Filtre d'aire obstruït: Netegeu o substituïu el filtre d'aire.
• Problemes amb el carburador: May require professional adjustment or cleaning.

6. Especificacions

7. Garantia i Suport

For warranty information, please refer to the documentation provided at the time of purchase. X-PRO is committed to customer satisfaction and offers support for parts and technical assistance.

If you require assistance or have questions not covered in this manual, please contact the seller or manufacturer directly through the contact information provided with your purchase or on the official X-PRO weblloc.