1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your BitFenix Nova Mesh mATX ARGB PC Case. Please read this guide thoroughly before beginning assembly to ensure proper setup and optimal performance. Keep this manual for future reference.
2. Producte acabatview
The BitFenix Nova Mesh mATX ARGB PC Case is designed for high airflow and aesthetic appeal, featuring pre-installed ARGB fans and support for various PC components. Its compact mATX form factor makes it suitable for efficient builds.
Imatge: Frontal view of the BitFenix Nova Mesh mATX ARGB PC Case, highlighting its dimensions (385mm H x 205mm W x 400mm D), three 120mm ARGB fans, and the included 4+4 ARGB controller.
Característiques principals:
- High Airflow Design: Mesh front panel for optimal ventilation.
- Ventiladors ARGB preinstal·lats: Three 120mm ARGB fans included with a built-in ARGB LED/PWM system controller.
- Compatibilitat de components: Supports Micro ATX and Mini ITX motherboards.
- GPU Support: Accommodates graphics cards up to 345mm in length.
- Suport per a refrigeradors de CPU: Air coolers up to 160mm in height.
- Suport PSU: Power supplies up to 180mm in length.
- Suport del radiador: Top: 240mm (thickness up to 27mm, fans up to 25mm thick with memory height up to 38mm). Front: 240mm/280mm. Rear: 120mm.
- Opcions d'emmagatzematge: Modular HDD cage with 3+1 2.5" SSD mounts and 2 x 3.5" HDD trays.
- Gestió de cables: 25mm space behind the motherboard tray.
- Panell lateral de vidre temperat: 4mm screw-free tempered glass for easy access and aesthetics.
- Filtració de pols: Removable front panel, PSU dust filter at the bottom, and magnetic dust filter at the top.
3. Configuració i instal·lació
Follow these steps for assembling your PC components within the BitFenix Nova Mesh mATX ARGB case.
3.1 Preparació del cas
- Traieu els panells laterals: Carefully remove the 4mm screw-free tempered glass side panel and the solid steel side panel.
- Caixa d'accessoris: Locate the accessory box inside the case, which contains screws and other mounting hardware.
3.2 Instal·lació de la placa base
- Instal·leu separadors: Ensure the correct standoffs are installed for your Micro ATX or Mini ITX motherboard.
- Muntar la placa base: Place your motherboard onto the standoffs and secure it with the appropriate screws.
3.3 Instal·lació de la unitat d'alimentació (PSU).
Image: Diagram showing the modular HDD cage with 2.5" SSD mounts and 3.5" HDD trays, and the power supply unit (PSU) installation area with space up to 180mm.
- Posició PSU: Slide the PSU into the bottom mount area, ensuring the fan faces downwards for optimal cooling (if applicable).
- Font d'alimentació segura: Fasten the PSU to the rear of the case with screws.
3.4 Instal·lació de la unitat d'emmagatzematge
- SSD de 2.5 polzades: Mount 2.5" SSDs onto the dedicated mounts behind the motherboard tray or on the modular HDD cage.
- Discs durs de 3.5 polzades: Install 3.5" HDDs into the removable trays within the modular HDD cage.
3.5 Instal·lació de la targeta gràfica (GPU)
Imatge: Interna view of the case illustrating support for graphics cards up to 345mm, air coolers up to 160mm, and 25mm cable management space.
- Traieu les cobertes de les ranures PCIe: Traieu les cobertes de les ranures PCIe necessàries de la part posterior de la carcassa.
- Inserir GPU: Carefully insert your graphics card into the appropriate PCIe slot on the motherboard.
- GPU segura: Fasten the GPU with screws to the case.
3.6 Cooling System Installation (Optional)
Image: Internal layout detailing radiator support (240mm at top, 120mm/240mm/280mm at front, 120mm at rear) and fan configurations.
- Refrigerador d'aire: Install your CPU air cooler, ensuring it does not exceed 160mm in height.
- Liquid Cooler (AIO): For 240mm AIO radiators, mount them at the top of the case. Ensure radiator thickness is within 27mm and fan thickness up to 25mm, with memory height up to 38mm.
- Ventiladors addicionals: Install additional 120mm or 140mm fans as needed in the front, top, or rear positions.
3.7 Gestió de cables
Utilize the 25mm space behind the motherboard tray and the various cable routing cutouts to organize cables. This improves airflow and aesthetics.
4. Operating the ARGB Lighting System
The BitFenix Nova Mesh mATX ARGB case comes with three pre-installed ARGB fans and a controller for managing the lighting effects.
Image: Diagram illustrating the connection of ARGB fans to the controller, SATA power, motherboard ARGB 3-pin connector, and the front RGB switch.
4.1 ARGB Control Options
- Control del botó de la caixa: The pre-installed ARGB controller can be connected to the case's front RGB switch (often the reset button). Pressing this button will cycle through various ARGB lighting modes and colors.
- Sincronització de la placa base: If your motherboard supports Addressable RGB (aRGB) with a 3-pin 5V header, you can connect the controller to your motherboard. This allows you to synchronize the case lighting with other ARGB components using your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, BIOSTAR RGB Sync).
4.2 Control de velocitat del ventilador (PWM)
The included controller also supports PWM (Pulse Width Modulation) for fan speed control. Connect the fan PWM cables to the controller, and the controller's PWM cable to a motherboard fan header. This allows your motherboard to dynamically adjust fan speeds based on system temperature.
5. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga durada de la carcassa i els components del vostre PC.
5.1 Neteja del filtre de pols
Imatge: Explosió view of the front panel, dust filter, and high-density mesh, along with images of the PSU dust filter and magnetic top dust filter, emphasizing easy cleaning.
- Filtre del panell frontal: The front panel is removable for easy access to the dust filter. Gently pull the bottom of the front panel to detach it, then remove and clean the filter.
- Filtre magnètic superior: The magnetic dust filter on the top of the case can be easily lifted off for cleaning.
- Filtre de pols de PSU: The dust filter located at the bottom, beneath the PSU, slides out for cleaning.
- Mètode de neteja: Use compressed air or a soft brush to remove accumulated dust from the filters. Wash with water if necessary, ensuring they are completely dry before reinstallation.
5.2 Neteja general
- Exterior: Netegeu les superfícies exteriors amb un damp tela. Eviteu els netejadors abrasius.
- Interior: Periodically use compressed air to clear dust from internal components and fan blades. Ensure the PC is powered off and unplugged before cleaning.
6. Solució De Problemes
Aquesta secció tracta problemes comuns que podeu trobar amb la carcassa del vostre PC.
6.1 Els ventiladors no giren o l'RGB no funciona
- Connexió d'alimentació: Ensure the ARGB controller is properly connected to a SATA power cable from your PSU.
- Connexions del ventilador: Verify that all fan PWM and ARGB cables are securely connected to the controller.
- Sincronització de la placa base: If using motherboard sync, ensure the controller's ARGB cable is connected to the correct 3-pin 5V aRGB header on your motherboard (not a 4-pin 12V RGB header). Check your motherboard's software for ARGB control.
- Botó de cas: If using the case button for control, ensure it is correctly wired to the controller. Try pressing the button to cycle through modes.
6.2 Poor Airflow or High Temperatures
- Filtres de pols: Clean all dust filters as described in the Maintenance section.
- Orientació del ventilador: Verify that fans are oriented correctly for optimal airflow (front fans typically intake, rear/top fans exhaust).
- Gestió de cables: Millorar la gestió del cablejat per reduir les obstruccions al flux d'aire.
- Component Clearance: Ensure no components are blocking fan intakes or exhausts.
6.3 Side Panel Difficult to Close
- Encaminament de cables: Check for any cables that are bulging or obstructing the side panel. Reroute them through the cable management channels.
- Col·locació de components: Ensure all components are seated correctly and not extending beyond the case's internal dimensions.
7. Especificacions
| Característica | Especificació |
|---|---|
| Nom del model | BFC-NSE-300-KKGSR-4A |
| Factor de forma | Micro ATX, Mini ITX |
| Tipus de cas | Torre mitja |
| Dimensions (L x A x A) | 15.16 x 8.07 x 15.75 polzades (385 x 205 x 400 mm) |
| Material | Metall, Vidre temperat |
| Color | Negre |
| Ventiladors preinstal·lats | 3 ventiladors ARGB de 120 mm |
| Suport del ventilador (frontal) | 2 x 120 mm o 2 x 140 mm |
| Suport del ventilador (superior) | 2 x 120 mm |
| Suport del ventilador (posterior) | 1 x 120 mm |
| Suport del radiador (superior) | 240mm (thickness <= 27mm, fan thickness <= 25mm, memory height <= 38mm) |
| Suport de longitud de GPU | Fins a 345 mm |
| Air Cooler Height Support | Fins a 160 mm |
| PSU Length Support | Fins a 180 mm |
| Badies d'unitat (SSD de 2.5") | 3+1 |
| Drive Bays (3.5" HDD) | 2 |
| Espai de gestió de cables | 25mm behind motherboard tray |
| Filtres de pols | Front Panel, PSU (Bottom), Magnetic (Top) |
| Ports d'E/S | 2 x USB 3.0 |
8. Informació de la garantia
BitFenix products are manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For detailed warranty information, please refer to the official BitFenix weblloc web o poseu-vos en contacte amb el vostre distribuïdor local.
9. Suport
If you encounter any issues or have questions regarding your BitFenix Nova Mesh mATX ARGB PC Case that are not covered in this manual, please contact BitFenix customer support or visit their official weblloc per obtenir més ajuda.
BitFenix Official Weblloc: www.bitfenix.com
Please have your product model number (BFC-NSE-300-KKGSR-4A) and proof of purchase ready when contacting support.
