1. Introducció
The Kidde Smart Hardwired Smoke Alarm (Model P4010ACS-WF) is designed to provide early warning of smoke and fire hazards in your home. This device integrates photoelectric sensing technology with smart features, including Wi-Fi connectivity for remote alerts and voice commands. It operates on 120V AC power and includes a 10-year sealed lithium battery for backup during power outages.
Característiques principals:
- Sensor fotoelèctric: Detects visible fire particles associated with smoldering fires.
- Alertes de veu: Announces "Fire! Fire!" upon detection and "Replace Alarm" at end-of-life.
- Connectivitat Wi-Fi: Sends real-time notifications to your smartphone via the Kidde app.
- 10-Year Sealed Battery Backup: Provides continuous protection during power failures.
- Compatibilitat amb la llar intel·ligent: Works with Amazon Alexa and Google Home for voice commands.
- Indicadors LED d'anell: Clearly displays operational status (Green, Amber, Red).
- Test-Hush Button: Allows for easy testing and temporary silencing of nuisance alarms.
- Whole-Home Activation: Interconnects with compatible Kidde alarms for simultaneous alerts.
Figure 1: Kidde Smart Hardwired Smoke Alarm and packaging.
2. Informació important de seguretat
Please read and understand all instructions before installing and operating this smoke alarm. Failure to follow these instructions may result in property damage, injury, or death. Keep this manual for future reference.
- This device is designed for residential use only.
- Assegureu-vos que l'alimentació estigui apagada abans de la instal·lació o el manteniment.
- Do not paint over the alarm. Paint can clog the sensing chambers and prevent the alarm from operating correctly.
- Proveu l'alarma setmanalment per assegurar-vos que funciona correctament.
- Never ignore a smoke alarm. Investigate the cause of any alarm immediately.
- This alarm is not intended to replace proper fire safety practices, including regular fire drills and escape plans.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Kidde Smart Smoke Alarm (P4010ACS-WF)
- Connector de CA
- Trim Plate Accessory
- Assembly User Card
- Guia de l'usuari (aquest document)
4. Configuració i instal·lació
4.1 Selecció d'una ubicació
Install smoke alarms on every level of your home, inside each bedroom, and outside each sleeping area. Avoid installing in kitchens, bathrooms, or garages where steam or exhaust might cause nuisance alarms.
4.2 Hardwired Installation
- Apagueu l'alimentació: Before beginning, ensure the power to the circuit where you are installing the alarm is turned off at the main fuse or circuit breaker box.
- Mount the trim plate: Secure the trim plate accessory to the electrical box on the ceiling or wall.
- Connecteu el cablejat: Connect the AC connector wires to your home's electrical wiring according to local electrical codes. Typically, this involves connecting black to black (hot), white to white (neutral), and red to red (interconnect, if applicable).
- Attach alarm to connector: Plug the AC connector into the back of the smoke alarm.
- Mount the alarm: Align the alarm with the trim plate and twist clockwise until it locks securely into place.
- Restaurar l'energia: Turn the power back on at the main fuse or circuit breaker box. The alarm will chirp once and the green LED will illuminate, indicating it is receiving AC power.
Figure 2: Hardwired installation of the smoke alarm.
4.3 Battery Backup Activation
The alarm includes a 10-year sealed lithium battery that activates automatically upon initial power-up. No battery replacement is required for the life of the alarm.
4.4 Kidde App Setup and Wi-Fi Connection
- Download the Kidde App: Cerca "Kidde" in your smartphone's app store (iOS or Android) and download the application.
- Crea un compte: Follow the in-app instructions to create a new Kidde account or log in if you already have one.
- Afegeix un dispositiu: Seleccioneu l'opció per afegir un dispositiu nou.
- Escaneja el codi QR: Locate the QR code on the back of your smoke alarm and scan it using the Kidde app. Ensure your phone is connected to a 2.4GHz Wi-Fi network.
- Follow In-App Prompts: Complete the pairing process by following the instructions provided in the Kidde app. This will connect your alarm to your home Wi-Fi network and your Kidde account.
Figure 3: Scanning the QR code for app setup.
Figure 4: Kidde app interface for device management.
5. Operating the Smoke Alarm
5.1 LED Ring Indicators
The LED ring on the alarm provides visual status indications:
- Verd: Normal operation. The alarm is powered and functioning correctly.
- Ambre: Operating error or fault detected. Refer to troubleshooting for details.
- Vermell: Smoke or fire hazard detected. The alarm will sound.
Figure 5: LED ring color indicators.
5.2 Voice Warning Alerts
In addition to the 85-decibel alarm, the device provides clear voice announcements:
- "Fire! Fire!": Repeated when smoke or fire is present.
- "Replace Alarm": Announced at the end of the device's 10-year lifespan.
Figure 6: Voice warning alerts feature.
5.3 Test-Hush Button
The large button on the front of the alarm serves multiple functions:
- Prova: Press and hold the button to test the alarm's functionality. The alarm will sound and the voice alert will activate. Perform this test weekly.
- Hush: Press the button to temporarily silence nuisance alarms (e.g., from cooking smoke). The alarm will silence for a short period, typically 8-10 minutes, before resetting.
- Silence Chirps: Temporarily silences low battery or end-of-life chirps for up to 24 hours (maximum 7 days).
5.4 Kidde App Features
When connected to Wi-Fi, the Kidde app provides enhanced control and monitoring:
- Notificacions en temps real: Receive alerts on your smartphone when smoke is detected, even when you are away from home.
- Proves a distància: Test your alarm directly from the app.
- Smart Hush: Silence false alarms through the app when you are connected to the same Wi-Fi network as the alarm.
- Seguiment de l'estat: View the operational status of your alarm and other connected Kidde devices.
Figure 7: Kidde app features for alarm management.
5.5 Whole-Home Activation
This smoke alarm is capable of hardwired interconnection with other select Kidde alarms. When one interconnected alarm detects smoke, all connected alarms will sound, providing comprehensive coverage throughout your home.
Figure 8: Illustration of whole-home activation with interconnected alarms.
6. Manteniment
6.1 Proves regulars
Test your smoke alarm weekly by pressing and holding the Test-Hush button until the alarm sounds. This confirms the alarm's electronics, battery, and horn are working.
6.2 Neteja de l'alarma
Dust and debris can accumulate in the sensing chamber, potentially causing nuisance alarms or reducing sensitivity. Clean your alarm at least once a month:
- Remove the alarm from its mounting bracket.
- Use a soft brush attachment on your vacuum cleaner to remove dust from the alarm's exterior and around the sensing chamber openings.
- Alternatively, use a can of compressed air to blow out any dust.
- Reinstall the alarm and test it.
6.3 Informació sobre la bateria
The Kidde Smart Smoke Alarm features a 10-year sealed lithium battery. This battery is designed to last the entire lifespan of the alarm and is not replaceable. When the alarm reaches its end-of-life, it will chirp and announce "Replace Alarm". At this point, the entire unit must be replaced.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Alarm sounds frequently without smoke (Nuisance Alarm) | Cooking fumes, steam, high humidity, dust, insects, proximity to vents. | Press the Hush button. Clean the alarm (see Maintenance). Relocate the alarm if consistently triggered by non-fire sources. Ensure proper ventilation during cooking. |
| L'alarma sona periòdicament | End-of-life warning, low battery (though sealed, this indicates unit replacement). | If the alarm announces "Replace Alarm", the unit has reached its end-of-life and must be replaced. You can temporarily silence chirps for up to 24 hours by pressing the Test-Hush button. |
| L'alarma no sona durant la prova | No AC power, faulty unit, battery issue. | Check circuit breaker. Ensure alarm is properly connected to AC power. If green LED is off, check wiring. If problem persists, replace the unit. |
| Cannot connect to Wi-Fi or Kidde App | Incorrect Wi-Fi password, 5GHz network, weak signal, app issues. | Ensure your phone is on a 2.4GHz Wi-Fi network. Verify Wi-Fi password. Move alarm closer to router. Restart router and alarm. Reinstall Kidde app if necessary. |
| Amber LED indicator is on | Operating error or fault. | Clean the alarm. If the amber light persists after cleaning and a power cycle, the unit may be faulty and require replacement. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | P4010ACS-WF |
| Font d'alimentació | 120V AC Hardwired with 10-Year Sealed Lithium Battery Backup |
| Tipus de sensor | Fotoelèctric |
| Potència de l'alarma | 85 dB a 10 peus |
| Humitat de funcionament | Up to 95% Relative Humidity (RH), Non-Condensing |
| Temperatura de funcionament | Refer to product packaging for specific range (Upper Temperature Rating: 100 Degrees Fahrenheit) |
| Dispositius compatibles | Android, iOS 12 or Newer, iPad, iPhone (Alexa, Google Home) |
| Dimensions del producte | 2.36 "P x 5.04" W x 5.04" H |
| Pes de l'article | 11.2 unces |
| Certificació | UL 2034, NFPA 72 |
| UPC | 047871320653 |
Figura 9: Dimensions del producte.
9. Informació de la garantia
This Kidde Smart Hardwired Smoke Alarm (Model P4010ACS-WF) comes with a Garantia limitada de 10 anys. The warranty covers defects in materials and workmanship under normal use and service. The 10-year warranty period begins when the alarm is powered on. If the power-on date is unknown, it should be assumed the alarm should be replaced after 10 years from the manufacturing date.
Please note that this is not a battery performance claim. The sealed lithium battery is designed to last the life of the alarm, but the warranty specifically covers the alarm unit itself.
For full warranty details and terms, please refer to the official Kidde documentation or contact Kidde customer support.
10. Suport i contacte
For further assistance, technical support, or warranty claims, please refer to the following resources:
- Kidde App: The Kidde app provides in-app support and troubleshooting guides.
- Recursos en línia: Visita el lloc web oficial de Kidde website for FAQs, product manuals, and support contact information. You can find more information at the Botiga Kidde.
- Atenció al client: Contact Kidde customer service directly for personalized support. Refer to your product packaging or the Kidde weblloc web per obtenir dades de contacte actuals.
