GOOLOO GT160 Portable Tire Inflator User Manual

1. Informació de seguretat

Please read all safety instructions carefully before using the GOOLOO GT160 Portable Tire Inflator. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Mantingueu el dispositiu lluny dels nens.
• Do not operate the device in wet conditions or near flammable liquids or gases.
• Avoid prolonged continuous operation to prevent overheating. Allow the device to cool down between uses.
• Assegureu-vos de la configuració de pressió correcta per a l'article que s'infla per evitar un inflat excessiu i possibles danys o lesions.
• Do not point the air nozzle at people or animals.
• Guardeu el dispositiu en un lloc fresc i sec quan no l'utilitzeu.
• Feu servir només els accessoris i els cables de càrrega proporcionats.

2. Producte acabatview

The GOOLOO GT160 is a portable, cordless tire inflator designed for various inflation needs, including car tires, motorcycle tires, bicycle tires, and sports balls. It features a digital pressure display, preset inflation modes, and an auto-shutoff function for precise and safe inflation. Additionally, it can function as a power bank and includes an LED light for emergency situations.

Figura 2.1: GOOLOO GT160 Portable Tire Inflator and included accessories, including the air hose, various nozzles, and USB charging cables.

2.1 Característiques clau

• Inflació ràpida: Achieves up to 160 PSI with an airflow of 35L/Min, capable of inflating a Tesla Model 3/Y tire from 30 PSI to 36 PSI in approximately 63 seconds.
• Smart Inflation Modes: Four preset modes for cars, motorcycles, bikes, and balls. Manual mode allows pressure setting from 4 to 160 PSI.
• Bateria de llarga durada: Built-in 7500mAh rechargeable battery provides up to 45 minutes of continuous wireless inflation on a full charge.
• Funció del banc d'energia: Can charge phones and other digital devices.
• Pantalla LED ultra gran: Digital display shows preset and real-time pressure in PSI, KPA, and BAR.
• Llum LED d'emergència: Features two lighting modes (lighting and strobe) for roadside emergencies and nighttime use.
• Tancament automàtic: Deixa d'inflar automàticament quan s'arriba a la pressió predeterminada.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• GOOLOO GT160 Portable Tire Inflator
• Air Hose with Schrader Valve Connector
• Adaptador de vàlvules Presta
• Agulla de bola
• Nozzle for Inflatables
• Cable de càrrega USB-C
• Bossa d'emmagatzematge
• Manual d'usuari (aquest document)

Figura 3.1: Visual representation of the GOOLOO GT160 package contents and dimensions.

4. Disseny i controls del dispositiu

Familiaritzeu-vos amb els components i els controls del dispositiu:

• Pantalla digital: Shows current pressure, preset pressure, battery level, and selected mode.
• Botó d'encesa: Encén/apaga el dispositiu i inicia/atura el inflat.
• Botó de mode (M): Cycles through preset inflation modes (Car, Motorcycle, Bike, Ball) and manual mode.
• Unit Button (U): Changes pressure units (PSI, BAR, KPA).
• Botons +/-: Adjusts the preset pressure value.
• Botó de llum LED: Activates the LED flashlight and switches between lighting modes.
• Port de la mànega d'aire: Punt de connexió per a la mànega d'inflat.
• Port d'entrada USB-C: Per carregar el dispositiu.
• Port de sortida USB-A: For using the device as a power bank.

Figura 4.1: The large LED digital screen displaying preset and real-time pressure values.

5. Configuració i càrrega

5.1 Càrrec inicial

Before first use, fully charge the GOOLOO GT160. Connect the provided USB-C charging cable to the device's USB-C input port and a suitable USB power adapter (not included). The battery indicator on the LED screen will show charging progress. A full charge typically takes several hours.

5.2 Connectar la mànega d'aire

Screw the air hose securely into the air hose port on the top of the inflator. Ensure it is tightened to prevent air leakage during inflation.

6. Instruccions de funcionament

6.1 Engegada/apagada

Manteniu premut el botó d'engegada (Ⓞ) for 3 seconds to turn the device on. The LED screen will illuminate. To turn off, press and hold the Power button again for 3 seconds.

6.2 Selecció del mode d'inflat

After powering on, short press the Mode button (M) to cycle through the preset modes:

• Mode cotxe: Default preset is 35 PSI (adjustable range: 25-45 PSI).
• Mode de motocicleta: Default preset is 36 PSI (adjustable range: 25-50 PSI).
• Mode bicicleta: Default preset is 45 PSI (adjustable range: 30-145 PSI).
• Mode de pilota: Default preset is 8 PSI (adjustable range: 4-16 PSI).
• Mode manual: Allows setting any pressure between 4 and 160 PSI.

The selected mode icon will be displayed on the screen.

Figura 6.1: Car Mode operation with default 35 PSI setting.

Figura 6.2: Motorcycle Mode operation with default 36 PSI setting.

Figura 6.3: Bicycle Mode operation with default 45 PSI setting.

Figura 6.4: Ball Mode operation with default 8 PSI setting.

6.3 Setting Pressure Unit

Short press the Unit button (U) to switch between PSI, BAR, and KPA.

6.4 Adjusting Preset Pressure

Utilitza el + i - buttons to increase or decrease the target pressure. The preset value will flash while adjusting.

6.5 Procés d'inflació

1. Connectar el broquet: Attach the appropriate nozzle to the air hose and then securely connect it to the item to be inflated.
2. Seleccioneu el mode: Turn on the inflator and select the desired inflation mode.
3. Pressió establerta: Adjust the target pressure using the +/- buttons.
4. Inici de la inflació: Premeu el botó d'engegada (Ⓞ) to begin inflation. The real-time pressure will be displayed.
5. Tancament automàtic: L'inflador s'aturarà automàticament quan s'arribi a la pressió predeterminada.
6. Desconnectar: Carefully disconnect the nozzle from the item.

Figura 6.5: Step 1: Connect the nozzle.

Figura 6.6: Step 2: Choose mode.

Figura 6.7: Step 3: Start inflating.

Figura 6.8: Step 4: Auto-stop and disconnect.

6.6 Ús com a bateria externa

Connect your digital device to the USB-A output port on the GOOLOO GT160 using your device's charging cable. The GT160 will begin charging your device. This function is useful for charging phones or other small electronics on the go.

Figura 6.9: The GT160 functioning as a 7500mAh power bank.

6.7 Ús de la llum LED

Short press the LED Light button (💡) to turn on the flashlight. Press again to switch to strobe mode. Press a third time to turn off the light. This feature is useful for illuminating work areas in low-light conditions or as a warning signal.

Figura 6.10: Emergency LED flashlight in use.

7. Manteniment

7.1 Càrrega

Recharge the device when the battery indicator shows low power. Regular charging helps maintain battery health. Do not leave the device fully discharged for extended periods.

7.2 Neteja i emmagatzematge

Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Store the inflator and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Solució De Problemes

9. Especificacions

• Nom del model: GOOLOO GT160
• Pressió màxima: 160 PSI
• Flux d'aire: 35 L / Min
• Capacitat de la bateria: 7500 mAh
• Entrada: USB-C
• Sortida: USB-A (for power bank function)
• Unitats de pressió: PSI, KPA, BAR
• Dimensions (LxWxH): 7.19 x 2.54 x 2.83 polzades (aprox.)
• Pes: 0.96 Kilograms (approx.)
• Material: Metall

10. Garantia i Suport

GOOLOO provides comprehensive support for its products.

• Garantia: Garantia de 18 mesos a partir de la data de compra.
• Política de devolució: Garantia de devolució incondicional de 30 dies.
• Atenció al client: 24/7 customer support available.
• Suport tècnic: Suport tècnic de per vida.

Per obtenir ajuda, visiteu el lloc web oficial de GOOLOO. website or contact their customer service team. Refer to your purchase documentation for specific contact details.