Manual d'instruccions del menjador automàtic per a mascotes WOPET FT70 Plus

1. Introducció

The WOPET FT70 Plus Automatic Pet Feeder is designed to provide scheduled and portion-controlled meals for your pets. This manual provides detailed instructions for the safe and effective use of your feeder, ensuring your pet receives consistent nutrition.

2. Informació de seguretat

• Llegiu atentament totes les instruccions abans d'utilitzar.
• Aquest aparell només és per a ús interior.
• No submergiu la unitat principal en aigua o altres líquids.
• Use only dry pet food with kibble sizes between 2-15mm.
• Keep out of reach of children and pets when not in use or during assembly.
• Ensure the power cord is placed securely to prevent pets from chewing on it. The feeder includes a bite-resistant nylon power cord for added safety.
• Desendolleu sempre l'alimentador abans de netejar-lo.

3. Contingut del paquet

• WOPET FT70 Plus Automatic Pet Feeder Main Unit
• Bol de menjar
• Adaptador d'alimentació
• Manual d'instruccions

4. Producte acabatview

The WOPET FT70 Plus features a 5-liter food capacity, a clear food visible window, and an intuitive touch screen control panel. Its design includes a 45-degree steep slope and a motor reverse function to prevent food blockages. The feeder is constructed from environmentally friendly ABS plastic.

Imatge: Frontal view of the WOPET FT70 Plus Automatic Pet Feeder, showing the control panel, food dispenser, and bowl. The 5L capacity is indicated on the side.

Image: Close-up of the feeder's food visible window, allowing users to monitor remaining food levels.

Imatge: Detallada view of the high-definition touch screen control panel with various icons for programming.

Imatge: Interna view of the feeder mechanism, highlighting the 45-degree slope and motor design to prevent food blockages.

5. Configuració

5.1 Font d'alimentació

The WOPET FT70 Plus supports dual power options: DC adapter and 3 D-cell batteries (not included) for backup. It is recommended to use both for uninterrupted operation, especially during power outages.

• Potència CC: Connect the power adapter to the feeder's DC input port and plug it into a wall outlet.
• Còpia de seguretat de la bateria: Open the battery compartment at the bottom of the feeder and insert 3 D-cell batteries, ensuring correct polarity.

Image: Illustration showing the feeder connected to a wall outlet via DC adapter and also indicating the battery compartment for backup power.

5.2 Muntatge

1. Place the food bowl securely under the dispenser outlet.
2. Ensure the main unit is stable on a flat surface.

5.3 Omplir la tremuja d'aliments

1. Obriu la tapa de la tolva d'aliments.
2. Pour dry pet food into the hopper. The feeder has a 5-liter capacity, suitable for most pets for several days.
3. Close the lid securely to maintain food freshness and prevent pests.

Imatge: De dalt a baix view of the feeder with the lid open, showing dry food being poured into the transparent 5-liter hopper.

6. Instruccions de funcionament

The FT70 Plus allows for customized feeding schedules with up to 6 meals per day and 1-8 portions per meal. The touch screen interface is designed for ease of use and includes an auto-lock feature to prevent accidental changes.

6.1 Configuració de l'hora actual

1. Press and hold the 'Set' button (gear icon) until the clock display flashes.
2. Use the 'Up' and 'Down' arrows to adjust the hour. Press 'Set' to confirm.
3. Repeat for minutes. Press 'Set' to save the current time.

6.2 Programació de l'horari d'alimentació

You can program up to 6 meals per day. Each meal can have 1 to 8 portions.

1. Press the 'Meal' button (food bowl icon) to enter meal programming mode. The meal number (e.g., '1') will flash.
2. Use 'Up'/'Down' arrows to select the meal number you wish to program (1-6). Press 'Meal' to confirm.
3. Set the feeding time for the selected meal using 'Up'/'Down' arrows for hours and minutes. Press 'Meal' to confirm each.
4. Set the number of portions (1-8) for this meal using 'Up'/'Down' arrows. Press 'Meal' to confirm.
5. Repeat steps 2-4 for additional meals.
6. To exit programming, press and hold the 'Set' button.

Image: Graphic illustrating the feeder's ability to program 1-6 meals per day and 1-16 portions per meal (note: product specifications state 1-8 portions).

Image: A cat eating from the feeder, with an overlay showing the digital display and programming options for meals and portions.

6.3 Enregistrament de veu

Record a 10-second voice message to call your pet to meals.

1. Press and hold the 'Record' button (microphone icon) until you hear a beep.
2. Speak your message into the microphone.
3. Release the 'Record' button when finished. The message will play during scheduled meal times.

Image: A dog looking at the feeder, with a speech bubble indicating a 10-second voice recording feature.

6.4 Alimentació manual

To dispense food immediately, press the 'Manual Feed' button (paw print icon). One portion will be dispensed each time the button is pressed.

6.5 Bloqueig del tauler de control

The control panel features an auto-lock function to prevent accidental changes to settings. To unlock, press and hold the 'Lock' button (padlock icon) for a few seconds.

6.6 Funció de memòria

The feeder has a built-in memory function that retains your programmed settings for up to 48 hours in case of a power failure, provided batteries are installed.

Image: Two feeders, one unplugged and one plugged in, demonstrating the memory function that retains settings after a power interruption.

6.7 Recommended Daily Feeding Portions

One portion is approximately 1/10 cup (25ml or 5 tsp). Adjust portions based on your pet's specific dietary needs and veterinarian recommendations.

Image: A table showing recommended portion sizes in cups, milliliters, and tablespoons for 2, 4, 5, 6, 8, and 10 portions.

7. Manteniment

7.1 Instruccions de neteja

The feeder's detachable structure allows for thorough cleaning. Ensure the feeder is unplugged before cleaning.

• The food hopper and food bowl are removable and can be hand-washed with mild soap and water.
• Netegeu la unitat principal i el tauler de control amb un anunciamp tela.
• Do not wash the motor unit directly with water.
• Assegureu-vos que totes les peces estiguin completament seques abans de tornar-les a muntar i omplir-les amb menjar.

Image: Disassembled parts of the feeder, including the food bowl and hopper, being hand-washed in a sink.

7.2 Food Freshness and Pest Prevention

The feeder is designed with an airtight seal to lock in freshness and a rotating vane that seals the food outlet when not in operation, preventing pests from entering.

Image: Close-up showing the feeder's fully sealed design to maintain food freshness.

Image: Diagram illustrating the internal rotating vane that seals the food outlet to prevent pests.

8. Solució De Problemes

• El dispensador no dispensa menjar: Check power connection and battery level. Ensure the food hopper is not empty and there are no blockages in the dispenser. Verify programming settings.
• Inconsistent portion sizes: Ensure kibble size is within the recommended 2-15mm range. Large or irregularly shaped kibble can affect portion accuracy. Check for any partial blockages.
• Difficulty programming: Refer to Section 6.2 and ensure you are pressing the 'Set' or 'Meal' button to confirm each step. The control panel may auto-lock; unlock it by holding the 'Lock' button.
• La gravació de veu no es reprodueix: Ensure the recording was successfully saved. Re-record if necessary.
• L'alimentador no s'encén: Check both DC power and battery installation. Try a different power outlet.

9. Especificacions

10. Garantia i Suport

The WOPET FT70 Plus Automatic Pet Feeder comes with a 1-year warranty from the date of purchase.

For technical support, warranty claims, or any questions regarding your product, please contact WOPET customer service. Refer to the contact information provided with your purchase or visit the official WOPET weblloc d'assistència.