Forno Orvieto 48-Inch Wall Mount Range Hood

Introducció

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Forno Orvieto 48-inch Wall Mount Range Hood. Please read these instructions thoroughly before installation or use and retain them for future reference.

Informació de seguretat

Seguretat general:

• Desconnecteu sempre l'alimentació abans de fer el manteniment o la neteja de la unitat.
• La instal·lació ha de complir amb tots els codis i regulacions locals.
• Ensure adequate ventilation for proper combustion and exhausting of gases through the flue of fuel-burning equipment to prevent back-drafting.
• No feu funcionar cap ventilador amb un cable o un endoll danyats. Descarteu el ventilador o torneu-lo a un centre de servei autoritzat per a l'examen i/o reparació.
• No utilitzeu aquesta unitat amb cap dispositiu extern de control de velocitat d'estat sòlid.

Seguretat elèctrica:

• Aquest aparell ha d'estar correctament connectat a terra.
• Assegureu-vos que la font d'alimentació coincideixi amb el voltage i la freqüència especificada a l'etiqueta de qualificació.
• No utilitzeu cables d'extensió ni adaptadors.

Seguretat contra incendis:

• No deixeu mai les unitats de superfície sense vigilància a la configuració alta. Els vessaments de vapor provoquen fum i greix que es poden incendiar.
• Netegeu els ventiladors amb freqüència. No s'ha de deixar que s'acumuli greix al ventilador o al filtre.
• Utilitzeu la mida adequada de la paella. Utilitzeu sempre estris de cuina adequats a la mida de l'element de superfície.

Contingut del paquet

Your Forno Orvieto 48-inch Wall Mount Range Hood package includes the following components:

• 48-inch Wall Mount Range Hood (1200 CFM, twin motors)
• Baffle Filters (Stainless Steel)
• Roof/Wall Exhaust Vent
• Metal Blower
• 10-inch Round Duct
• Damper
• 4 Surface Lights (GU10 Halogen)
• Decorative Crown Molding Trim
• Two Chimney Extensions (for ceilings up to 10 feet)
• Cable d'alimentació

Especificacions

Instal·lació

Proper installation is crucial for the performance and safety of your range hood. It is recommended that installation be performed by a qualified technician.

1. Planificació i Preparació

Before beginning, ensure you have sufficient bracing in the wall to support the weight of the range hood. Determine the center of the wall where the hood will be installed. The minimum height above the cooktop should be 25 inches for electric ranges and 30 inches for gas ranges.

Image: Dimensions of the Forno Orvieto 48-inch Wall Mount Range Hood.

This image illustrates the overall dimensions of the range hood, including its width of 47.24 inches, depth of 23.62 inches, and adjustable height from 29.14 inches to 44.29 inches. These measurements are critical for planning your installation space.

2. Muntatge de la caputxa

Mark the wall for the mounting points. Drill holes and insert appropriate anchors. Leave the mounting screws protruding approximately 1/4 inch to allow the hood to be hung. Carefully lift the hood and attach it to the mounting screws, then tighten the screws to secure the unit.

3. Ducting and Electrical Connections

Connect the 10-inch round duct to the air outlet adapter on the hood. Ensure all connections are sealed with foil-backed tape to prevent air leaks. Make the necessary electrical connections according to local codes. Plug the power cord into a grounded outlet.

4. Instal·lació de la xemeneia

Install the chimney mounting brackets on the wall, ensuring they are level and aligned with the hood. Slide the two-part chimney extensions together and then onto the hood, securing them to the mounting brackets. Finally, slide the decorative crown molding trim onto the top of the chimney and fasten it into place.

Per obtenir una guia visual del procés d'instal·lació, consulteu el vídeo següent:

Instruccions de funcionament

Your Forno Orvieto Range Hood features intuitive electronic touch controls for ease of use.

Image: Close-up of the electronic touch control panel on the Forno Orvieto Range Hood. The panel features buttons for power, fan speed adjustment (1-4), light control, and a 3-minute delay shut-off timer.

1. Encendre/apagar

Premeu el botó d'encesa per encendre o apagar la unitat.

2. Ajust de velocitat del ventilador

The hood offers 4 fan speeds. Press the speed control buttons (1, 2, 3, 4) to select your desired ventilation level. Speed 1 is the lowest (25dB), and Speed 4 is the highest (68dB, 1200 CFM).

3. Control de la il·luminació

Press the light button to turn the GU10 Halogen surface lights on or off. These lights provide bright illumination for your cooktop.

4. Delay Shut-Off Timer

Activate the 3-minute delay shut-off timer by pressing the timer button. The fan will continue to operate for 3 minutes before automatically turning off.

For a demonstration of the controls and features, please watch the following videos:

5. Understanding CFM Requirements

To determine the appropriate CFM for your kitchen, consider the following methods:

• Room Volume Method: Multiply the length, width, and height of your kitchen (in feet) to get the cubic footage. Divide this number by 4 (to ensure air exchange every 4 minutes). This gives you the minimum CFM needed.
• Gas Range Method: For every 10,000 BTUs of your gas range, you need approximately 100 CFM. For example, a 50,000 BTU gas range would require 500 CFM.
• Electric Range Method: For every 10 inches of cook space on an electric range, you need approximately 100 CFM. For example, a 30-inch electric range would require 300 CFM.

It is generally advisable to choose a range hood with a slightly higher CFM than your calculated minimum to provide a buffer, especially if you frequently cook smoky or oily foods, or if your ductwork involves multiple turns or long runs. Always round up to the nearest 100 CFM increment when selecting a model.

Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil de la campana extractora.

Imatge: Primer pla view of the stainless steel baffle filters and halogen lights on the underside of the Forno Orvieto Range Hood. The filters are designed for easy removal and cleaning.

1. Baffle Filter Cleaning

The stainless steel baffle filters are designed to capture grease and are dishwasher-safe. Remove the filters by pulling the spring release latches and dropping them down. Clean them regularly (monthly or as needed, depending on cooking frequency) in your dishwasher or by hand with hot, soapy water. Ensure they are completely dry before re-installing.

2. Stainless Steel Surface Cleaning

Clean the stainless steel surfaces with a non-abrasive stainless steel cleaner and a soft cloth. Always wipe in the direction of the grain to avoid scratching. Do not use abrasive pads or harsh chemicals.

3. Light Bulb Replacement

To replace a GU10 Halogen bulb, ensure the power is off and the bulb has cooled. Gently twist and pull the old bulb out, then insert and twist the new bulb into place.

Resolució de problemes

Si teniu problemes amb la campana extractora, consulteu els passos habituals següents per resoldre problemes:

• El ventilador no funciona: Check if the unit is plugged in and the circuit breaker is not tripped. Ensure the power button is pressed.
• Els llums no funcionen: Verify the light button is pressed. Check if the light bulbs are securely in place or need replacement.
• Mala succió: Ensure the baffle filters are clean and not clogged with grease. Check for obstructions in the ductwork. Verify that the fan speed is set appropriately for the cooking task.
• Soroll excessiu: Check for loose parts or obstructions in the fan blades. Ensure the ductwork is properly installed and sealed.

Si el problema persisteix després d'intentar aquests passos, poseu-vos en contacte amb l'atenció al client.

Garantia i suport

Your Forno Orvieto 48-inch Wall Mount Range Hood comes with a 2-Year Factory Parts and Labor Warranty. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For warranty claims, technical assistance, or further inquiries, please contact Forno customer support. Refer to your purchase documentation for specific contact details or visit the official Forno weblloc.