FAME EVIDENCE Tankless Electric Water Heater 110V User Manual

1. Introducció

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your FAME EVIDENCE Tankless Electric Water Heater. Please read these instructions carefully before installation and use, and retain them for future reference.

The FAME EVIDENCE electric water heater is designed to provide instant hot water for showering, featuring four temperature levels: cold, warm, hot, and super hot. Its automatic operation activates upon water flow and adjusts temperature based on water pressure.

2. Informació important de seguretat

Failure to follow these safety instructions could result in electric shock, fire, property damage, or personal injury.

• Instal·lació elèctrica: This appliance requires a dedicated electrical circuit. It must be installed directly to the electrical distribution protection box. A 40 Amp interruptor de circuit i 10 AWG wiring are required. Do not use extension cords or plug into standard outlets.
• Instal·lació professional: Installation should be performed by a qualified electrician or plumber in accordance with all local and national electrical and plumbing codes.
• Pressió de l'aigua: Ensure adequate water pressure for proper operation. The heater automatically adjusts temperature based on water pressure.
• Posada a terra: La unitat ha d'estar correctament connectada a terra per evitar descàrregues elèctriques.
• Aïllament: The FAME electric shower heater is designed with complete insulation and surge protection, meeting international safety standards. Do not tamper amb els components interns.
• Temperatura de l'aigua: Be aware of the selected temperature setting to avoid scalding. Always test water temperature before use.
• Manteniment: Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o neteja.
• Nens: Keep children away from the appliance during operation and installation.

3. Contingut del paquet

Verifiqueu que tots els components següents estiguin inclosos al paquet:

• FAME EVIDENCE Electric Water Heater Unit
• 8-inch Shower Head
• 5.2-foot Hand Hose with "Bidet" and Support
• 30 cm long Installation Tube (reinforced thermoplastic)
• Coberta de cable
• Connector de filferro
• Additional Replacement Resistance (spare part)

4. Especificacions tècniques

5. Instal·lació (Configuració)

Proper installation is critical for the safe and efficient operation of your FAME EVIDENCE water heater. Refer to the electrical connection diagram below.

5.1. Requisits previs a la instal·lació

• Circuit elèctric: A dedicated 110V circuit with a 40 Amp circuit breaker is mandatory.
• Cablejat: Use 10 AWG wiring for the electrical connection.
• Subministrament d'aigua: Ensure a stable water supply. The minimum height to the water supply tank should be 1.0 meter (39.37 inches) and maximum 40 meters (15.74 inches).
• Lloc de muntatge: The shower must be wall-mounted. The maximum height from the floor to the shower should be 2.10 meters.
• Distància des de la paret: Allow sufficient space for the shower head and installation tube. The included installation tube is 30 cm long.

5.2. Connexió elèctrica

1. Apagueu l'alimentació: Before starting any electrical work, ensure the main power supply to the circuit is OFF at the breaker panel.
2. Connecteu el cablejat: Connect the electrical cables from your dedicated circuit to the water heater using the provided wire connector.
   • Blanc: Neutre
   • Blue: Line
   • Green: Ground pole

   The FAME heater must be installed directly to the electrical distribution protection box. Do not use a standard plug or switch for connection.

3. Install Cable Cover: Secure the cable cover over the electrical connections for protection and aesthetics.

5.3. Connexió de fontaneria

1. Connect Installation Tube: Attach the 30 cm reinforced thermoplastic installation tube to the water inlet of the shower unit.
2. Connectar el subministrament d'aigua: Connect the installation tube to your cold water supply line. Ensure all connections are watertight to prevent leaks.
3. Install Shower Head: Attach the 8-inch shower head to the outlet of the main unit.
4. Install Hand Hose: If desired, connect the 5.2-foot hand hose with its "Bidet" attachment and support.

6. Funcionament

The FAME EVIDENCE water heater is designed for simple, automatic operation.

6.1. Ús inicial

1. Before turning on the electrical power, open the water tap and allow water to flow through the shower unit for a few minutes to ensure it is completely filled with water and to purge any air from the system.
2. Once water is flowing steadily, close the tap.
3. Connecteu l'alimentació elèctrica a la unitat a l'interruptor.

6.2. Selecció de la temperatura

The shower unit features a selector switch for four temperature levels:

• Fred: Sense calefacció.
• càlid: Low heating. Offers up to 60% energy savings in this position.
• Calent: Medium heating.
• Super Hot: Maximum heating.

To select a temperature, rotate the selector switch on the main shower unit to the desired setting. The heater will automatically activate when water flows and will adjust the temperature based on the selected setting and water pressure.

7. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre escalfador d'aigua.

7.1. Neteja

• Exterior: Netegeu l'exterior de la unitat amb un damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Broquets de dutxa: Periodically check and clean the shower head nozzles to prevent mineral buildup and ensure consistent water flow. You can gently rub the rubber nozzles to dislodge deposits.

7.2. Resistance Replacement

The heating element (resistance) may need replacement over time due to wear or mineral buildup. Your package includes a spare resistance.

1. Apagueu l'alimentació: Absolutely ensure the electrical power to the unit is OFF at the circuit breaker before attempting to replace the resistance.
2. Desmuntar: Carefully follow the manufacturer's instructions (usually found within the unit's internal packaging or a separate leaflet) for disassembling the shower head to access the heating element.
3. Substitueix: Remove the old resistance and install the new one, ensuring it is securely anchored.
4. Torneu a muntar: Reassemble the unit, ensuring all seals are properly seated.
5. Prova: Before turning on power, open the water tap to fill the unit with water. Then, turn on the power and test operation.

8. Solució De Problemes

If you encounter issues with your FAME EVIDENCE water heater, refer to the following common problems and solutions:

• Sense aigua calenta:
  • Check if the circuit breaker is tripped. Reset if necessary.
  • Ensure the water supply is on and flowing adequately.
  • Verify the temperature selector is not set to "Cold".
  • The heating element (resistance) may be faulty and require replacement.
• Aigua no prou calenta:
  • Increase the temperature setting on the selector switch.
  • Reduce water flow slightly to allow more time for heating.
  • Check for low water pressure.
  • The heating element may be partially damaged or calcified.
• Fuites d'aigua:
  • Turn off water supply and power immediately.
  • Comproveu que totes les connexions de fontaneria estiguin ben ajustades.
  • Inspect seals and gaskets for damage.
• Sense flux d'aigua:
  • Check if the main water supply is turned on.
  • Inspect for blockages in the water inlet or shower head.

If problems persist after attempting these solutions, contact a qualified technician or the manufacturer's customer support.

9. Garantia i Suport

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. Keep your proof of purchase for warranty claims.

For technical support or further assistance, please contact FAME customer service through their official channels.