1. Introducció
This instruction manual provides detailed guidance for the installation, operation, and maintenance of your BONTEC Dual Monitor Mount. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use of the product. This mount is designed to enhance your workspace by providing flexible positioning for two monitors, optimizing viewing comfort and reclaiming desk space.
Image: BONTEC Dual Monitor Mounts in an office setting, demonstrating improved workspace ergonomics.
2. Informació de seguretat
Always follow basic safety precautions when installing and using this product to reduce the risk of injury or damage. Keep this manual for future reference.
- Capacitat de pes: Do not exceed the maximum load capacity of 18 lbs (8 kg) per arm. Overloading can cause instability and potential damage.
- Mida del monitor: This mount is suitable for monitors between 13 and 32 inches.
- Compatibilitat VESA: Ensure your monitors have VESA mounting patterns of 75x75mm or 100x100mm.
- Estabilitat de l'escriptori: Verify that your desk is structurally sound and can support the combined weight of the mount and monitors.
- Instal·lació: Follow all installation steps precisely. If you are unsure about any part of the installation, seek professional assistance.
- Ajustaments: When making adjustments, support your monitors to prevent accidental drops.
- Nens: Mantingueu les peces petites i els materials d'embalatge lluny dels nens per evitar perills d'asfixia.
3. Contingut del paquet
Please verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact BONTEC customer support.
- Pal principal amb escriptori Clamp/Grommet Base
- Conjunt de braç de monitor dual
- Plaques de muntatge VESA (2x)
- Clips de gestió de cables
- All necessary screws, washers, and spacers for VESA mounting
- Allen Keys for assembly and adjustments
- Manual d'instruccions
Imatge: Més deview of the BONTEC Dual Monitor Mount components, including the main pole, dual arms, VESA plates, and mounting hardware.
4. Especificacions
| Característica | Especificació |
|---|---|
| Marca | BONTEC |
| Número de model | MDM002L-v02 |
| Compatibilitat de la mida del monitor | 13 - 32 polzades |
| Capacitat de pes (per braç) | Fins a 18 lliures (8 kg) |
| Compatibilitat VESA | 75x75mm, 100x100mm |
| Angle d'inclinació | +/- 45 graus |
| Angle de gir | 180 / 230 graus |
| Rotació | 360 graus |
| Longitud màxima d'extensió del braç | 18 polzades |
| Ajust d'alçada màxima | 16.14 polzades |
| Mètodes d'instal·lació | Escriptori Clamp, Base d'orella |
| Escriptori Clamp Gruix | 0.39 - 2.9 polzades |
| Gruix de la base de l'escriptori amb ullets | 0.39 - 3.9 polzades |
| Diàmetre del forat del grommet | 0.39 - 2.36 polzades |
| Material | Acer |
5. Configuració i instal·lació
Follow these steps carefully to install your BONTEC Dual Monitor Mount. An installation video is provided below for visual guidance.
5.1. Choose Installation Method
The mount supports two installation methods: Desk Clamp o Base d'ulleres.
- Escriptori Clamp Instal·lació: Ideal for desks without pre-drilled holes. The heavy-duty 'C' clamp provides supreme stability. Ensure your desk thickness is between 0.39" and 2.9".
- Instal·lació de la base de l'oxell: Suitable for desks with a bolt-through hole. The hole diameter should be between 0.39" and 2.36", and the desk thickness between 0.39" and 3.9".
Image: Visual representation of the two installation methods: Desk Clamp and Grommet Base, with specified desk thickness and hole diameter requirements.
5.2. Assemble the Main Pole
Attach the main pole to your desk using your chosen method. For the desk clamp, secure it firmly to the edge of your desk. For the grommet base, feed the pole through the desk hole and secure it from underneath.
5.3. Attach Monitor Arms
Slide the dual monitor arm assembly onto the main pole. You can adjust its height on the pole by loosening and tightening the securing bolt.
Image: Illustration demonstrating how to adjust the height of the monitor arms along the main pole for optimal viewing.
5.4. Fixeu les plaques VESA als monitors
Secure the VESA mounting plates to the back of your monitors using the provided screws. Ensure the screws are appropriate for your monitor's VESA holes. The VESA plates are quick-fit and detachable for easy installation.
5.5. Mount Monitors to Arms
Carefully slide the monitors (with attached VESA plates) onto the monitor arms. Secure them in place using the thumb screws or other locking mechanisms on the VESA plates.
Image: Two monitors securely mounted on the BONTEC Dual Monitor Mount, illustrating the product's capacity for 13-32 inch screens and VESA compatibility.
5.6. Installation Instruction Video
For a comprehensive visual guide, please watch the official installation video:
Video: Official installation instructions for the BONTEC Dual Monitor Mount, demonstrating each step of the assembly process.
6. Funcionament i ajustos
The BONTEC Dual Monitor Mount offers extensive flexibility to customize your viewexperiència.
6.1. Ajust d'alçada
To adjust the height of the monitors, loosen the securing bolt on the main pole, slide the arm assembly to the desired height, and then re-tighten the bolt firmly.
6.2. Ajust de la inclinació
The monitor can be tilted +/- 45 degrees. Use the provided Allen key to adjust the tilt tension on the VESA plate joint. Once the desired tilt angle is set, tighten the screw to secure it.
Image: Illustration of the monitor's tilt adjustment range, allowing for ergonomic viewangles d'ajust.
6.3. Ajustament del gir
The monitor arms can swivel 180 degrees at the VESA plate joint and 230 degrees at the central arm joint, allowing you to position your screens side-by-side or at an angle.
6.4. Rotation Adjustment
Each VESA plate allows for a full 360-degree rotation, enabling you to switch your monitors between landscape and portrait orientations without removing them.
Image: Demonstrates the extensive swivel (180°/230°) and full 360° rotation capabilities of the monitor arms, allowing for flexible screen positioning.
6.5. Ajust de nivell
After mounting, if your monitors are not perfectly aligned, you can make fine-tune adjustments to their level by slightly loosening the VESA plate screws, adjusting, and then re-tightening.
6.6. Gestió de cables
Utilize the integrated cable management clips along the arms and pole to route and conceal your monitor cables. This helps maintain a tidy and clutter-free workspace.
Imatge: Primer pla view of the integrated cable management system on the monitor arms and a dedicated storage slot for Allen keys, promoting a neat workspace.
7. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del suport del monitor.
- Neteja: Netegeu la muntura amb un drap suauamp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
- Comprovació d'estanquitat: Periodically check all screws and bolts to ensure they remain tight, especially after making significant adjustments or moving the mount.
- Lubricació: No lubrication is typically required for this product. If joints become stiff, ensure no debris is present and check for overtightened bolts.
8. Solució De Problemes
If you encounter any issues with your monitor mount, refer to the common problems and solutions below.
| Problema | Causa possible | Solució |
|---|---|---|
| Monitors are not level | Uneven installation or VESA plate adjustment. | Loosen the level adjustment screw on the VESA plate, adjust the monitor to be level, and re-tighten. |
| Monitor sags or tilts down | Tilt tension screw is too loose or monitor is too heavy. | Tighten the tilt adjustment screw on the VESA plate. Ensure monitor weight is within specifications (max 18 lbs per arm). |
| Mount is unstable or wobbles | Escriptori clamp/grommet base is not tight enough or desk is not sturdy. | Torneu a apretar les pinces de l'escriptoriamp or grommet base. Ensure your desk is stable and within the specified thickness range. |
| Difficulty adjusting arm movement | Les articulacions estan massa ajustades. | Slightly loosen the bolts at the arm joints using the appropriate Allen key. Do not loosen excessively. |
If the problem persists after attempting these solutions, please contact BONTEC customer support for further assistance.
9. Garantia i Suport
For information regarding product warranty, returns, or technical support, please refer to the warranty card included with your product or visit the official BONTEC weblloc web. Conserveu el rebut de compra com a comprovant de compra.
BONTEC Customer Service: Please refer to the contact information provided on your product packaging or the official BONTEC weblloc web per obtenir els detalls d'assistència més actualitzats.
