HYPER GO 14301 V3 RC Drift Car Instruction Manual

Introducció

Thank you for choosing the HYPER GO 14301 V3 1/14 RTR Brushless RC Drift Car. This manual provides essential information for setting up, operating, and maintaining your new RC vehicle. Please read it thoroughly before first use to ensure safe and optimal performance.

The HYPER GO 14301 V3 RC Drift Car, showcasing its main components including the vehicle, remote control, two batteries, and three sets of tires.

Què hi ha a la caixa

Your HYPER GO 14301 V3 package includes the following items:

• 1 x HYPER GO 14301 V3 RC Truck
• 1 x T3A 2.4GHz 3-Channel Transmitter (Remote Control)
• 2 x 2S 7.4V 2000 mAh Rechargeable LiPo Batteries (one pre-installed)
• 1 x 2S USB Charging Cable
• 3 Sets of Tires (1 set pre-installed, 2 additional sets for drift and rally)
• 4 x Extra High Rebound Shock Springs
• 8 x Extra Body Clips
• 1 x Protective Shell (to prevent entry of small pebbles and weeds)
• 1 x Cross Wrench
• 1 x tornavís
• 1 x manual de producte

A visual representation of all included accessories: the RC truck, remote, batteries, charging cable, extra tires, shock springs, body clips, protective shell, cross wrench, and screwdriver.

Configuració

Instal·lació i càrrega de la bateria

1. Carefully remove the body shell by detaching the body clips.
2. Locate the battery compartment. The vehicle comes with one 2S 7.4V 2000 mAh LiPo battery pre-installed.
3. To charge the battery, disconnect it from the vehicle's ESC. Connect the battery to the provided 2S USB charging cable.
4. Plug the USB charging cable into a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging indicator will show the charging status.
5. Once fully charged, disconnect the battery and reconnect it to the ESC in the vehicle. Ensure secure connections.

Configuració del transmissor

• Install 2 AA batteries (not included) into the transmitter.
• Turn on the transmitter first, then the vehicle. The transmitter and vehicle should automatically bind. If not, refer to the user manual for binding instructions.
• Familiarize yourself with the throttle trigger and steering wheel on the transmitter.
• Adjust the throttle limits for beginners to 70% using the control on the transmitter until comfortable with full speed.

Official HYPER GO video demonstrating the RC truck's features and capabilities, including glimpses of its setup and operation.

En funcionament

Driving Modes & Control

• The HYPER GO 14301 V3 is a 4WD all-road vehicle, capable of handling various surfaces.
• Utilize the three sets of tires for different experiences: high grip rubber tires for tarmac, rally tires for dirt roads, and bald tires for drifting.
• The independent GYRO system assists in precise straight-line running and easier dynamic handling for drifting. It is recommended to adjust the gyro to 75% for optimal performance.
• Experience speeds of 26+ mph (42 kph) with the included 2S battery, and up to 38+ mph (62 kph) with an optional 3S LiPo battery (not included).

Interactive Lights

• The vehicle features simulated brake lights and turn signals.
• The entire vehicle light system can be controlled through the Transmitter, offering flash mode, continuous light mode, and OFF.

The rear of the RC truck displaying its interactive brake lights and turn signals, controllable via the remote.

Manteniment

Regular maintenance ensures the longevity and performance of your HYPER GO 14301 V3.

Característiques de durabilitat

• The vehicle is built with a 6061 aluminum alloy chassis and super-standard large metal support rods for enhanced durability.
• A large front foam bumper integrates with the body for maximum protection during impacts.
• Metal gears and metal differential better distribute power and contribute to the 4X4 system's robustness.
• The 5.5MM diameter axle and M4 nuts provide strong connections.
• 16 ball bearings reduce power loss and friction within the drivetrain.

Suspension and Protection

• The pre-mounted sponge inserted tires and oil-filled absorbers significantly reduce shaking at high speeds.
• Four extra high-strength springs are included for more demanding road conditions.
• Utilize the protective shell to prevent small pebbles and weeds from entering the internal components.

Detall view of the independent gyro system and adjustable, oil-filled shocks, designed to absorb bumps and enhance control.

The robust front foam bumper and F/R zinc metal reinforced sheets integrated with the chassis for maximum protection.

Especificacions

Detallada view of the brushless 2845 3900KV motor with metal heatsink and dual cooling fans, alongside the independent 45A ESC.

Informació de seguretat

Warning: Not for children under 3 years old.

Always operate the RC vehicle in a safe and open environment, away from people, pets, and obstacles. Ensure all connections are secure before operation. Do not modify the vehicle's components unless specified by the manufacturer. Always supervise children during operation.

Suport

For any questions, technical assistance, or parts inquiries, please contact HYPER GO customer support. Refer to the product packaging or the official HYPER GO weblloc web per obtenir la informació de contacte més actualitzada.

Additional upgrade accessories and replacement parts may be available for purchase on Amazon. Cerca 'HYPER GO' and your model number '14301' to find compatible items.