Introducció
This manual provides essential information for the proper installation, operation, and maintenance of your HGLRC Specter 1404 2750KV 4-6S Brushless Motor. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
Image: HGLRC Specter 1404 2750KV Brushless Motor, front view.
Característiques del producte
- Disseny del rotor: Features a new rotor appearance with an anodized two-color process.
- Material: Constructed from 7075 aviation aluminum for high-strength one-piece rotor.
- Imants: Utilizes customized N52H curved magnetic steel for strong magnetism and high torque.
- Enrotllament: Equipped with super high temperature resistant 200° copper wire winding for stable motor operation.
- Stator: Incorporates imported Kawasaki silicon steel sheets for low loss, reduced heat generation, and improved efficiency.
- tuning: Optimized tuning maintains high torque at low speed, provides linear power output with rapid throttle changes, and ensures precise, fast response during turns.
- Eix: Alloy Steel Outlet Shaft designed for high strength and reduced weight.
- Compatibilitat: Suitable for 2-inch Tiny drones or 4-inch toothpick drones.
Image: Illustration of the motor's new appearance design and 7075 aviation aluminum rotor.
Image: Detail of the high-performance N52H arc-shaped magnetic steel for stronger magnetism.
Image: Close-up of the 200-degree ultra-high temperature resistant copper wire winding.
Imatge: View of the imported low-loss silicon steel sheet for improved efficiency.
Image: Depiction of the motor's optimized tuning for responsive control.
Especificacions
Image: Detailed specification table for the HGLRC Specter 1404 2750KV motor.
| Paràmetre | Valor | Paràmetre | Valor |
|---|---|---|---|
| Model de motor | 1404 | Corrent Alta | 6.9A |
| Valor KV | 2750KV | Potència màxima | 155W |
| Pol magnètic | 9N12P | Suitable Propeller | 2-4 polzades |
| Acer magnètic | N52H | Voltage | 4-6S |
| Estator | Kawasaki 1200 | Especificació de la línia | 150 mm |
| Rotor | 7075 | Mida del motor | Φ19.13 mm x 12.25 mm |
| Coixinet | ISC | Forat de muntatge | 4*M2-Φ9 |
| Sinuós | 200° High Temperature Resistant Copper Wire | Pes | 10 g (inclòs el cable) |
| Eix de sortida | M1.5x3.8mm | Qualitat del material | Acer d'aliatge |
Efficacy Table
Image: Table detailing motor efficacy under various propeller, voltage, and throttle conditions.
Llista d'embalatge
Els següents elements s'inclouen al paquet del producte:
- 1404 2750KV motor x 1
- Cargols M2x6mm x 5
- Cargols M2x7mm x 2
Image: Visual representation of the motor and included screws in the packing list.
Configuració
1. Muntatge del motor
- Ensure your drone frame has a compatible motor mounting pattern (4*M2-Φ9).
- Align the motor with the mounting holes on the drone arm.
- Secure the motor using the provided M2x6mm or M2x7mm screws. Use appropriate screw length to avoid damaging motor windings.
- Tighten screws evenly to prevent stress on the motor base.
2. Wiring to ESC (Electronic Speed Controller)
- Connect the three motor wires to the corresponding three wires on your ESC.
- The order of connection determines the motor's rotation direction. If the motor spins in the wrong direction, swap any two of the three motor wires.
- Ensure all solder joints are clean, strong, and insulated to prevent short circuits.
Pautes de funcionament
1. Propeller Selection
- This motor is recommended for 2-4 inch propellers.
- Choose propellers that are balanced and free from damage to prevent vibrations and ensure efficient flight.
2. Font d'alimentació
- The motor is designed for 4-6S LiPo batteries.
- Ensure your ESC is rated for at least 15A to match the motor's maximum continuous current.
3. Prova inicial
- Before full flight, perform a bench test to verify motor rotation direction and smooth operation.
- Monitor motor temperature during initial flights. Excessive heat can indicate an issue with propeller choice, ESC settings, or power delivery.
Manteniment
- Neteja: Regularly inspect and clean the motor to remove dirt, dust, and debris that can accumulate in the bell or around the bearings. Use compressed air or a soft brush.
- Inspecció de rodaments: Check bearings for smooth rotation. If bearings feel gritty or noisy, they may need replacement.
- Integritat del cable: Periodically inspect motor wires and solder joints for any signs of wear, fraying, or damage. Ensure connections are secure.
- Danys físics: After any hard impact or crash, inspect the motor bell and shaft for bends, cracks, or other damage. Replace damaged components immediately.
Resolució de problemes
- El motor no gira:
- Check all wiring connections between the motor and ESC.
- Verify ESC is properly configured and receiving signals from the flight controller.
- Inspect for any physical obstructions preventing the motor from rotating.
- Motor Stuttering/Vibrating:
- Ensure propellers are balanced and securely attached.
- Check for bent motor shafts or damaged motor bells.
- Verify ESC settings (e.g., motor timing) are appropriate for the motor.
- Calor excessiu:
- Confirm propeller size and pitch are within recommended limits. Over-propping can cause overheating.
- Ensure adequate airflow around the motor.
- Check for short circuits or damaged windings.
- Loss of Power/Efficiency:
- Inspect for damaged or worn bearings.
- Check for debris inside the motor.
- Verify battery health and discharge rate.
Suport
For further assistance, technical support, or inquiries regarding your HGLRC Specter 1404 2750KV Brushless Motor, please visit the official HGLRC store or contact their customer service through the provided channels.
Official HGLRC Store: HGLRC Amazon Store
