1. Introducció
This manual provides essential information for the safe installation, operation, and maintenance of your Craftmade Taylor 24-inch Dual Mount Indoor Ceiling Fan. Please read all instructions thoroughly before beginning installation or use. Retain this manual for future reference.
Figure 1.1: Craftmade Taylor 24-inch Dual Mount Indoor Ceiling Fan, showcasing its white and satin brass finish with integrated LED light.
2. Informació de seguretat
Per reduir el risc de descàrrega elèctrica, incendi o lesions personals, seguiu sempre aquestes precaucions de seguretat bàsiques:
- Llegiu totes les instruccions i la informació de seguretat abans d'instal·lar el ventilador i guardeu-les.
- All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, use a qualified electrician.
- Before you begin, disconnect power by turning off the circuit breakers to the fan and light fixture at the main fuse box.
- Assegureu-vos que el lloc d'instal·lació permeti que les pales del ventilador girin sense obstruccions.
- El ventilador s'ha de muntar amb una distància mínima de 2.1 metres (7 peus) des de la vora posterior de les pales fins al terra.
- No feu funcionar el ventilador amb les pales o la carcassa danyades.
- No introduïu objectes a la trajectòria de les aspes del ventilador.
3. Contingut del paquet
Verify that all components listed below are included in your package. If any parts are missing or damaged, contact Craftmade customer support before proceeding with installation.
- Muntatge del motor
- Polycarbonate Blades (Custom Taylor 20")
- Pack de maquinari
- Guia d'instal·lació
- WIDC Handheld Remote Control
- LED Light Kit (Optional, Dimmable)
- Optional Lens Cover
- Varilla de 6 polzades
4. Instal·lació i configuració
This ceiling fan is designed for indoor use and offers dual-mount installation options. Refer to the included Installation Guide for detailed, step-by-step instructions.
4.1 Opcions de muntatge
The fan supports two primary mounting configurations:
- Flat Ceiling Mount: For standard, flat ceilings.
- Suport de sostre angular: Suitable for ceilings angled up to 23 degrees. For steeper slopes, a separate SMA180XXX adapter is required (sold separately).
Figura 4.1: lateral view of the fan, illustrating the mounting mechanism for ceiling installation.
4.2 Connexió elèctrica
Ensure power is disconnected at the circuit breaker before wiring. Connect the fan's electrical wires to your household wiring according to the provided wiring diagram in the Installation Guide. It is recommended to consult a qualified electrician for proper installation.
4.3 Blade and Light Kit Assembly
Attach the custom Taylor 20-inch polycarbonate blades to the motor assembly. If using the optional LED light kit, follow the instructions to install it and the lens cover. The light kit is dimmable.
Figure 4.2: Visual representation of dual mount options and key features, including the LED light kit and blade design.
5. Instruccions de funcionament
Your Craftmade Taylor ceiling fan can be controlled using the included WIDC handheld remote control or via Wi-Fi enabled smart devices.
5.1 Funcionament del control remot
The WIDC handheld remote allows you to control the fan speed, light on/off, light dimming, and fan direction (forward/reverse for summer/winter modes).
- Velocitat del ventilador: Use the designated buttons to adjust fan speed (6-speed reversible DC motor).
- Control de la llum: Press the light button to turn the LED light on or off. Hold the button to dim or brighten the light.
- Direcció del fan: A button on the remote controls the fan's rotational direction, optimizing airflow for different seasons.
6. Funcions intel·ligents i connectivitat
The Craftmade Taylor fan is Wi-Fi enabled and integrates with Smart by Bond for enhanced control and voice activation.
6.1 Wi-Fi Connectivity (Smart by Bond)
Download the Smart by Bond app on your smartphone or tablet. Follow the in-app instructions to connect your fan to your home Wi-Fi network. This enables control of fan functions from your smart device.
6.2 Voice Activation and Smart Home Integration
Once connected via Smart by Bond, your fan can be integrated with popular smart home devices and voice assistants, including Alexa. Refer to the Smart by Bond app or your smart home device's instructions for specific setup procedures to enable voice commands for your fan and light.
7. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del ventilador de sostre.
- Neteja: Periodically clean the fan housing and blades with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Inspecció de la fulla: Check fan blades for any cracks or damage. Ensure all blade screws are securely tightened.
- Kit de llum: The LED light source is designed for long life. If replacement is ever needed, consult a qualified electrician or Craftmade support.
- Apretar els elements de fixació: Over time, some fasteners may become loose. Check all mounting hardware and blade attachments annually and tighten as necessary.
8. Solució De Problemes
Si teniu problemes amb el ventilador, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no arrenca | No hi ha alimentació al ventilador; Connexions de cables soltes; Pila del comandament a distància baixa. | Check circuit breaker; Verify all wire connections; Replace remote control battery. |
| El ventilador trontolla | Cargols de la fulla solts; Fulles mal equilibrades; Suport de muntatge solt. | Tighten all blade screws; Use a balancing kit (not included) if necessary; Ensure mounting bracket is secure. |
| La llum no funciona | Connexió de cable fluixa; problema amb el controlador LED. | Check light kit wiring; Contact customer support if LED driver is suspected. |
| El comandament a distància no respon | Battery low/dead; Remote not paired with fan. | Replace remote battery; Refer to the Installation Guide for remote pairing instructions. |
| Problemes de connectivitat Wi-Fi | Incorrect Wi-Fi password; Router too far; App issues. | Verify Wi-Fi credentials; Move router closer or use a Wi-Fi extender; Reinstall Smart by Bond app. |
9. Especificacions
Detailed technical specifications for the Craftmade Taylor 24-inch Dual Mount Indoor Ceiling Fan:
Figure 9.1: Close-up of the fan's motor and blade attachment, highlighting the satin brass finish and polycarbonate blades.
- Nom del model: Taylor 24"
- Número de peça: TYL24WSB3
- Marca: Fet a mà
- Color: White/Satin Brass
- Material: Aluminum, Plastic, Silicon, Steel, Copper (Polycarbonate Shade/Blades)
- Dimensions: 24 x 24 x 16.99 polzades (Producte)
- Pes de l'article: 18.74 lliures
- Ús interior/exterior: Interior
- Font d'alimentació: CA (120 volts)
- Tipus de font de llum: LED
- Wattage: 18 watts (llum LED)
- Capacitat de flux d'aire: 1505 peus cúbics per minut (CFM)
- Mètode de control: App, Remote (WIDC Handheld Control, Smart by Bond App)
- Característiques especials: LED Light, Programmable, Remote Controlled, Timer, Wi-Fi Enabled
- Muntatge requerit: Sí
- Bateries: Yes (for remote, Alkaline type)
- UPC: 647881249953
10. Garantia i Suport
Your Craftmade Taylor ceiling fan is backed by a limited lifetime warranty. For specific details regarding warranty coverage, please refer to the warranty documentation included with your product or visit the official Craftmade weblloc.
For technical assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please contact Craftmade customer support.
Figure 10.1: Information regarding purchasing from an authorized Craftmade distributor, ensuring product authenticity and support.
Quan es compraasing Craftmade products from an authorized distributor, you receive benefits such as new products in original packaging with all necessary installation and support documents, and products upholding original factory coverage for defects and issues throughout the manufacturer coverage period.
