YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Contingut del paquet

Comproveu que el vostre paquet contingui els elements següents:

• 1 x YuanLey 8 Port 2.5G Ethernet Switch
• 1 x cable d'alimentació
• 1 x Manual d'usuari

3. Característiques del producte

• 9 Port Configuration: Includes 8 x 2.5 Gigabit Ethernet ports and 1 x 10G SFP+ Port.
• Rendiment d'alta velocitat: Delivers 2.5 times faster network performance than traditional Gigabit switches, with a switching capacity of up to 60Gbps.
• Plug and Play: Unmanaged design requires no configuration for immediate use.
• Durable and Quiet: Features a metal case with 6KV lightning protection and a fanless design for silent operation.
• Amplia temperatura de funcionament: Funciona de manera fiable a temperatures que oscil·len entre els -10 °C i els 50 °C.
• Col·locació versàtil: Supports both wall mount and desktop placement.

4. Producte acabatview

Figure 4.1: YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch

Figura 4.2: Panell frontalview with Ports and Indicators

The switch features 8 RJ45 ports supporting 10/100/1000Mbps/2.5G adaptive speeds and 1 SFP+ port for 1G/2.5G/10G fiber connections. LED indicators provide status for power and link activity.

Figura 4.3: Panell posteriorview amb entrada d'alimentació

Figura 4.4: Detallada View de Ports i Indicadors

The rear panel includes the DC 12V/1.0A power input port and a grounding screw for electrical safety. The front panel LEDs indicate power status, 2.5Gbps link speed (orange), and 100/1000Mbps link speed (green) for RJ45 ports, and link status for the SFP+ port.

5. Configuració

Follow these steps to set up your YuanLey Ethernet Switch:

1. Connectar l'alimentació: Plug the provided power adapter into the DC 12V/1.0A input port on the rear of the switch, then plug the adapter into a power outlet. The PWR LED on the front panel will illuminate green.
2. Connecteu els dispositius Ethernet: Connect your network devices (e.g., computers, NAS, WiFi 6 APs, gaming PCs) to the 2.5G Base-T ports (1-8) using standard Ethernet cables (Cat5e or higher recommended for 2.5G speeds). The corresponding port LEDs will light up to indicate a successful connection and speed.
3. Connect SFP+ Module (Optional): If using the 10G SFP+ port, insert a compatible 1G/2.5G/10G SFP/SFP+ module (not included) into the SFP+ slot. Then, connect a fiber optic cable or DAC cable to the module. The SFP indicator LED will light up when a link is established.

Figure 5.1: Typical Network Setup with the YuanLey Switch

6. Funcionament de l'interruptor

The YuanLey 2.5G Unmanaged Ethernet Switch is designed for simple plug-and-play operation. Once powered on and connected to your network devices, it will automatically detect the link speed and establish connections without any further configuration.

• Indicadors LED: Observe the PWR, L1-L8, and SFP+ Link LEDs to monitor the switch's status and network activity.
• MDI/MDIX automàtic: The switch supports Auto MDI/MDIX, eliminating the need for crossover cables.
• Adaptive Speed: RJ45 ports automatically adapt to 10/100/1000Mbps or 2.5Gbps.

7. Manteniment

To ensure optimal performance and longevity of your switch, consider the following maintenance guidelines:

• Col·locació: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The fanless design relies on natural convection for cooling.
• Neteja: Netegeu periòdicament l'exterior de l'interruptor amb un drap suau i sec. Eviteu utilitzar netejadors líquids o en aerosol.
• Gestió de cables: Assegureu-vos que els cables de xarxa estiguin ben organitzats i no estiguin excessivament doblegats ni tensats.
• Font d'alimentació: Use only the original power adapter provided with the switch.

Figure 7.1: Fanless Design and Environmental Considerations

8. Solució De Problemes

Si teniu problemes amb el commutador, consulteu els problemes i solucions habituals següents:

• Sense energia:
  • Assegureu-vos que l'adaptador de corrent estigui connectat correctament a l'interruptor i a una presa de corrent que funcioni.
  • Check if the PWR LED is illuminated. If not, try a different power outlet.
• Cap enllaç/activitat en un port:
  • Verify that the Ethernet cable is securely connected to both the switch port and the network device.
  • Prova un cable Ethernet diferent.
  • Assegureu-vos que el dispositiu connectat estigui encès i funcioni correctament.
  • Check the LED indicator for the specific port. If it's off, there might be no link.
• Velocitat de xarxa lenta:
  • Ensure all devices in the network path (NICs, cables, routers) support 2.5G speeds to achieve maximum performance.
  • Use Cat5e or higher-rated Ethernet cables for 2.5G connections.
  • Check the color of the port LED: Orange indicates 2.5Gbps, Green indicates 100/1000Mbps.
• SFP+ Port Issues:
  • Ensure the SFP/SFP+ module is correctly inserted and compatible with the switch.
  • Verify the fiber optic or DAC cable is properly connected and undamaged.
  • Check the SFP indicator LED for link status.

9. Especificacions

Figura 9.1: Dimensions del producte

10. Garantia i Suport

YuanLey products are designed for reliability and performance. For warranty information and technical support, please refer to the official YuanLey weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.

Per a més ajuda, podeu visitar el YuanLey Store on Amazon.