1. Introducció
Thank you for choosing the eMACROS Solar Wireless Driveway Alarm System. This system is designed to provide reliable motion detection and alerts for your property, enhancing security and awareness. Featuring a solar-powered sensor and a versatile receiver, it offers easy installation and expandable coverage.
This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your driveway alarm system. Please read it thoroughly before use to ensure proper functionality and longevity of the product.
2. Informació de seguretat
- No intenteu desmuntar ni reparar el dispositiu vosaltres mateixos. Encarregueu tot el manteniment a personal qualificat.
- Mantingueu el dispositiu allunyat de temperatures extremes, llum solar directa i humitat.
- Ensure proper mounting to prevent the sensor from falling and causing injury or damage.
- Eliminar les bateries segons la normativa local.
- This device is designed for outdoor use (sensor) and indoor use (receiver). Do not expose the receiver to outdoor elements.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al vostre paquet:
- 1 x eMACROS Receiver
- 1 x eMACROS Solar Wireless Motion Sensor
- 1 x AC Power Adapter for Receiver
- Cargols i ancoratges de muntatge
- Manual d'usuari (aquest document)
4. Producte acabatview
4.1 Receptor
The receiver is the central unit that receives signals from the sensor and emits alerts. It features volume controls, a mode button for chime selection, and indicators for different channels.
- Volume Buttons (VOL+, VOL-): Adjust the alert volume.
- Botó de mode: Cycles through 7 unique chimes.
- Botó d'encesa: Encén/apaga el receptor.
- Indicadors de canal (1-7): Light up to indicate which sensor detected motion.
- DC 5V (AC Adapter) Port: Per connectar l'adaptador de corrent.
- 4 AA Backup Battery Compartment: For optional battery backup (batteries not included).
- Non-slip MATS: For stable placement on surfaces.
- Forats de muntatge: Per muntatge a la paret.
4.2 Solar Wireless Motion Sensor
The sensor detects motion using Passive Infrared (PIR) technology and transmits signals wirelessly to the receiver. It is solar-powered and designed for outdoor use.
- Panell solar: Charges the internal battery, eliminating the need for frequent battery replacement.
- PIR Sensor Lens: Detects motion and heat signatures.
- Suport de muntatge: Allows for 360-degree adjustment for optimal positioning.
- Weather-resistant Housing (IP66): Protects against water and dust.
5. Configuració i instal·lació
5.1 Configuració del receptor
- Encès: Connect the AC power adapter to the receiver and plug it into a standard wall outlet. Alternatively, insert 4 AA backup batteries (not included) into the battery compartment.
- Col·locació: Place the receiver in a central location within your home, ensuring it is within wireless range of your sensor(s). Avoid placing it near large metal objects or other electronic devices that may cause interference.
5.2 Instal·lació del sensor
The sensor is designed for outdoor use and should be mounted in a location where it can effectively detect motion in your desired area, such as a driveway, walkway, or garden.
- Tria la ubicació: Select a mounting location that provides a clear line of sight to the area you wish to monitor. The sensor has a detection range of up to 30 feet. Ensure the solar panel receives adequate sunlight for charging.
- Alçada de muntatge: Mount the sensor approximately 3-4 feet (0.9-1.2 meters) above the ground. This height helps optimize detection and minimize false alarms from small animals.
- Muntatge segur: Use the provided screws and anchors to securely attach the sensor's mounting bracket to a stable surface, such as a wall, fence post, or tree.
- Ajust d'angle: Adjust the sensor's angle using its 360-degree adjustable bracket to cover the desired detection zone. Test the detection area by walking through it to ensure proper coverage.
The sensor's solar panel charges its internal battery. Even on cloudy or rainy days, the battery can be charged, ensuring continuous operation.
6. Instruccions de funcionament
6.1 Pairing Sensor(s) with Receiver
The system typically comes pre-paired. If you need to re-pair or add additional sensors (up to 7), follow these steps:
- Assegureu-vos que el receptor estigui encès.
- Manteniu premut el botó Mode button on the receiver until a channel indicator light starts flashing (e.g., Channel 1). This indicates pairing mode.
- Within 10 seconds, trigger the sensor by waving your hand in front of its lens. The receiver will chime and the corresponding channel light will stop flashing and remain solid, indicating successful pairing.
- Repeat for additional sensors, selecting a different flashing channel light on the receiver for each new sensor.
6.2 Ajust del volum
Utilitza el VOL+ i VOL- buttons on the side of the receiver to increase or decrease the alert volume.
6.3 Selecting Chimes
The receiver offers 7 unique chimes. Press the Mode button briefly to cycle through the available chimes. You can assign different chimes to different sensors to identify the detection location.
6.4 Detecció de moviment
When the sensor detects motion (from people, animals, or vehicles) within its detection zone, it will send a signal to the receiver. The receiver will then sound the selected chime and illuminate the corresponding channel indicator light.
The sensor is designed to detect movements from various sources, including:
- Persones: Alerts you to visitors or intruders approaching your property.
- Animals: Can detect large animals, providing awareness of wildlife or pets.
- Vehicles: Notifies you when a vehicle enters or exits your driveway.
The system boasts a 1/2 mile wireless transmission range under ideal conditions, allowing for extensive coverage of your property.
Video: eMACROS 1/2 mile Solar Driveway Alarm With 7 Channel. This video demonstrates the system's features, including solar charging, vehicle detection, and the receiver's alert functions for people and animals. It also highlights the expandability of the system.
7. Manteniment
- Neteja del sensor: Periodically wipe the solar panel and PIR sensor lens with a soft, damp cloth to ensure optimal performance and charging efficiency. Do not use abrasive cleaners.
- Battery Check (Receiver): If using AA backup batteries, check them periodically and replace them if the receiver's performance degrades or if the power adapter is disconnected for extended periods.
- Consideracions ambientals: While the sensor is waterproof (IP66), extreme weather conditions (e.g., heavy snow accumulation on the solar panel) may temporarily affect performance. Clear any obstructions from the solar panel as needed.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Receiver not alarming or sensor not detecting. | Sensor battery low; Sensor out of range; Sensor not paired; Obstruction in detection path. | Ensure sensor solar panel receives sunlight; Move sensor closer to receiver; Re-pair sensor (Section 6.1); Clear obstructions from sensor's view. |
| Falses alarmes. | Sensor mounted too low; Direct sunlight on sensor; Moving objects (e.g., branches) in detection zone; Large animals. | Adjust sensor mounting height; Reposition sensor to avoid direct sunlight; Clear foliage; Adjust sensor angle to minimize detection of unwanted movement. |
| Curt abast sense fil. | Obstructions (walls, trees, metal); Interference from other devices. | Relocate receiver or sensor to minimize obstructions; Move receiver away from other electronics. |
| Receiver not powering on. | Power adapter not connected; No backup batteries or batteries dead. | Check power adapter connection; Install fresh AA backup batteries. |
9. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | BT274 |
| Interval de transmissió sense fil | Up to 1/2 mile (under ideal conditions) |
| Interval de detecció del sensor PIR | Fins a 30 peus |
| Sensor Power Source | Solar Powered (internal rechargeable battery) |
| Font d'alimentació del receptor | DC 5V AC Adapter (included), 4 AA batteries (backup, not included) |
| Interval de temperatura de funcionament | -20 ℃ a 60 ℃ (-4 °F a 140 °F) |
| Sensor Waterproof Rating | IP66 |
| Nombre de campanes | 7 |
| Expandabilitat | Up to 7 sensors per receiver |
| Dimensions del receptor | Aproximadament 3.7 x 3.7 x 1.1 polzades |
| Dimensions del sensor | Aproximadament 6 x 2 x 1 polzades |
| Pes de l'article | 0.27 quilograms (9.6 unces) |
10. Garantia i Suport
eMACROS products are designed for reliability and durability. For specific warranty information and terms, please refer to the warranty card included with your product or visit the official eMACROS weblloc.
If you encounter any issues or have questions regarding your eMACROS Solar Wireless Driveway Alarm System, please contact eMACROS customer support. Our team is dedicated to providing assistance and ensuring your satisfaction.
Informació de contacte:
- Refer to your product packaging or the eMACROS official weblloc web per obtenir les dades de contacte més actualitzades.
