Yaheetech Armless Mid-Back Office Chair - User Manual

1. Introducció

Thank you for choosing the Yaheetech Armless Mid-Back Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before assembly and retain them for future reference.

2. Informació de seguretat

• Assegureu-vos que totes les peces estiguin presents i no estiguin danyades abans del muntatge. No utilitzeu el producte si hi falta alguna peça o si està trencada.
• Follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
• No us atureu a la cadira.
• No supereu la capacitat màxima de pes de 136 kg (300 lliures).
• Mantingueu els nens allunyats de la cadira durant el muntatge. Les peces petites poden suposar un perill d'asfíxia.
• Feu servir la cadira sobre una superfície plana per evitar que es bolqui.
• Reviseu regularment tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.

3. Contingut del paquet

Verifiqueu que tots els components que s'enumeren a continuació s'inclouen al paquet:

• 1 x Office Chair (unassembled)
• 1 x manual d'instruccions
• 1 x Kit d'accessoris (que conté tots els cargols, perns i eines necessaris)

4. Instruccions de muntatge

Assembly typically takes 15-30 minutes with two people. Follow these steps carefully:

1. Preparar la base: Unpack all components. Place the five-star base on a flat, stable surface. Insert the five casters into the holes at the end of each leg of the base until they click into place.
2. Install the Gas Lift: Insert the gas lift cylinder into the center hole of the five-star base.
3. Treure la tapa protectora: IMPORTANT: Before attaching the seat, remove the black plastic protective cap from the top of the gas lift cylinder. Failure to do so will prevent height adjustment.


Figure 4.1: Removing the black plastic cap from the gas lift.

4. Attach the Mechanism Plate: Align the mechanism plate with the screw holes on the underside of the seat cushion. Ensure the lever is on the right side when facing the front of the seat. Secure with the provided screws and tighten using the Allen key.
5. Connectar el seient a la base: Carefully place the assembled seat onto the gas lift cylinder, ensuring the center hole of the mechanism plate aligns with the top of the gas lift. Press down firmly to secure.

5. Instruccions de funcionament

Your Yaheetech office chair offers several adjustable features for personalized comfort:

5.1. Ajust d'alçada del seient

To adjust the seat height, lift the lever located on the right side of the seat. While seated, lift the lever to lower the seat. To raise the seat, lift the lever while standing or with minimal weight on the seat. Release the lever to lock the height in place. The seat height can be adjusted from approximately 47.5 cm to 57.5 cm.

Figure 5.1: Adjustable seat height and rocking function.

5.2. Tilt Function and Tension

The chair features a rocking function for relaxation. To activate the rocking motion, pull out the lever on the right side of the seat. Push the lever in to lock the chair in an upright position.

The tilt tension can be adjusted by turning the round knob located underneath the seat. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).

Figure 5.2: Adjusting tilt tension and activating rocking motion.

5.3. Gir i mobilitat

The chair is designed with a 360° swivel function and smooth-rolling casters, allowing for easy movement and access to your workspace without strain.

Figure 5.3: Armless design for space-saving and easy mobility.

6. Manteniment

Proper care will extend the life and appearance of your chair:

• Neteja: The faux leather surface is water-resistant and easy to clean. Wipe spills immediately with a damp cloth. For general cleaning, use a soft, damp drap amb aigua i sabó suau. Eviteu productes químics agressius o netejadors abrasius.
• Inspecció: Periodically check all screws and bolts for tightness. Retighten as needed to maintain stability and safety.
• Rodes: Mantingueu les rodes lliures de cabells i deixalles per garantir un moviment suau.
• Eviteu la llum solar directa: L'exposició prolongada a la llum solar directa pot fer que la pell sintètica s'esvaeixi o s'esquerdi.

7. Solució De Problemes

• La cadira no ajusta l'alçada: Ensure the black plastic protective cap has been removed from the gas lift cylinder. Check if the height adjustment lever is fully engaged.
• La cadira sembla inestable: Check all assembly screws and bolts. Tighten any loose connections. Ensure the chair is on a flat, even surface.
• Rodes que no giren suaument: Inspect casters for trapped debris (hair, lint, etc.) and clean them.
• La cadira grinyola: Apply a small amount of silicone lubricant to moving parts or connections if persistent squeaking occurs.

8. Especificacions

Note: Dimensions may vary slightly (up to 1.5 cm) due to manufacturing tolerances.

9. Garantia i Suport

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Yaheetech customer service directly. Keep your purchase receipt as proof of purchase.