Fuse Rad-Andle-Br

Fuse Andle VintagManual d'usuari de l'altaveu Bluetooth retro

Model: Rad-Andle-Br

Introducció

Gràcies per la compraasing the Fuse Andle Vintage Retro Bluetooth Speaker. This portable speaker combines classic design with modern audio technology, offering versatile playback options and a rich sound experience. Please read this manual carefully before using the device to ensure proper operation and to maximize its lifespan.

Producte acabatview

Contingut del paquet

Identificació de components

Top panel controls of the Fuse Andle speaker

Figura 1: Controls del panell superior

  • 1. Control de volum: Ajusta el nivell de volum principal.
  • 2. Bass Knob: Ajusta el nivell de freqüència dels greus.
  • 3. Treble Knob: Adjusts the treble frequency level.
  • 4. Botó de mode: Switches between Bluetooth, AUX, USB, and Micro SD modes.
  • 5. Previous Button: Salta a la pista anterior.
  • 6. Next Button: Salta a la pista següent.
  • 7. Botó de reproducció/pausa: Reprodueix o posa en pausa l'àudio. També respon/finalitza trucades.
  • 8. Botó d'encesa/apagada: Encén o apaga l'altaveu.
  • 9. BT/AUX/Charging Indicator: LED light indicating current mode or charging status.
Back panel ports of the Fuse Andle speaker

Figure 2: Back Panel Ports

  • 1. TF (Micro SD) Card Slot: Per a la reproducció de targetes Micro SD.
  • 2. Port USB: Per a la reproducció des d'una unitat USB.
  • 3. Entrada AUX: Entrada d'àudio de 3.5 mm per a connexió amb cable.
  • 4. DC Input: Port de càrrega per a l'altaveu.

Configuració

Carregant l'altaveu

Before first use, fully charge the speaker. Connect the provided USB charging cable to the DC Input port on the back of the speaker (Figure 2, item 4) and the other end to a USB power adapter (not included) or a computer USB port. The charging indicator light will illuminate during charging and turn off when fully charged. A full charge takes approximately 9 hours and provides up to 12 hours of playback.

Image showing the DC input port for charging

Connect the charging cable to the DC input port.

Instruccions de funcionament

Encès/Apagat

Manteniu premut el botó Botó On/Off (Figure 1, item 8) for a few seconds to power the speaker on or off.

Mode Bluetooth

  1. Ensure the speaker is powered on. It will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth indicator light.
  2. Al telèfon intel·ligent o a un altre dispositiu amb Bluetooth, activeu el Bluetooth i cerqueu els dispositius disponibles.
  3. Select "Fuse Andle" from the list of devices. Once connected, the indicator light will become solid, and you will hear a confirmation tone.
  4. You can now play audio from your device through the speaker. Use the Pom de volum, Anterior, A continuació, i Reproduir/Pausa buttons on the speaker, or control playback directly from your device.
Image showing a smartphone connected to the Fuse Andle speaker via Bluetooth

Seamlessly connect your smartphone via Bluetooth 5.1 for wireless audio streaming.

Mode AUX

Connect a 3.5mm audio cable (not included) from your audio source to the Entrada AUX port (Figure 2, item 3) on the speaker. Press the Botó de mode (Figure 1, item 4) until the speaker enters AUX mode. Audio will now play through the wired connection.

USB & Micro SD Card Playback

Inseriu una unitat flaix USB al Port USB (Figure 2, item 2) or a Micro SD card into the Ranura per a targetes TF (Figure 2, item 1). The speaker will automatically detect the media and begin playback. If not, press the Botó de mode (Figure 1, item 4) to switch to the correct input mode. Supported audio formats include MP3, WAV, and WMA.

Close-up of the USB and Micro SD card slots on the speaker

The speaker supports playback from USB drives and Micro SD cards.

Making/Receiving Calls (Bluetooth Mode)

Manteniment

Resolució de problemes

ProblemaCausa possibleSolució
L'altaveu no s'encén.La bateria està esgotada.Carregueu l'altaveu completament.
Sense so.El volum és massa baix; s'ha seleccionat un mode incorrecte; el dispositiu no està connectat.Increase volume; press Mode button to select correct input; ensure Bluetooth device is paired or AUX/USB/SD is properly inserted.
La connexió Bluetooth és inestable o falla.Device is too far from speaker; interference; speaker not in pairing mode.Move device closer to speaker (within 10 meters); avoid obstacles; ensure speaker is in Bluetooth pairing mode.
Cannot play from USB/Micro SD.Sense suport file format; suport no inserit correctament; suport corrupte.Assegureu-vos files are MP3, WAV, or WMA; reinsert media; try different media.

Especificacions

CaracterísticaDetall
Nom del modelRad-Andle-Br
MarcaFusible
Tipus d'altaveuPrestatgeria / Portàtil
Tecnologia de connectivitatBluetooth 5.1, USB, Micro SD, AUX
Dispositius compatiblesSmartphone, Laptop, Television
Dimensions del producte3.9 "P x 4.5" W x 6.6" H
Pes de l'article2.77 lliures (1.26 quilograms)
Durada de la bateriaFins a 12 hores
Temps de càrregaAprox. 9 hores
Potència de sortida màxima dels altaveus5 watts
Interval BluetoothFins a 10 metres (33 peus)
Nivell de resistència a l'aiguaNo resistent a l'aigua
Components inclososSpeaker unit, USB charging cable
Diagram showing the dimensions of the Fuse Andle speaker

Product dimensions for the Fuse Andle speaker.

Garantia i Suport

The Fuse Andle speaker comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or contact Fuse customer support. For technical assistance or further inquiries, please visit the official Fuse weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

Fabricant: Fusible

UPC: 810080511255