Irfora ATS-25 Max Portable DSP Radio Receiver User Manual

1. Producte acabatview

The Irfora ATS-25 Max is a portable DSP radio receiver featuring an enhanced Si4732 chip and a 2.8-inch color touchscreen. Designed for clear data display and an improved user experience, this device offers a wide range of functionalities including HAM frequency modulation, radio search, and various band selections. It is equipped with a built-in rechargeable lithium battery for extended use.

Característiques principals:

• Disseny compacte i lleuger per a la portabilitat.
• Aliatge d'alumini resistent casing.
• 2.8-inch color touchscreen for clear data visualization.
• Multifunctional display: time, signal strength, modulation modes, tuning steps, band selection (broadcast, HAM), bandwidth.
• Volume control via encoder with digital bar display.
• Type-C charging interface with a 2000 mAh integrated lithium battery.
• 3.5 mm stereo audio output and 3.5 mm audio frequency modulation antenna interface.
• Radio search function with direct frequency input and HAM amateur band short channel support.
• RDS services support for FM transmitters.

2. Contingut del paquet

El paquet inclou:

• 1 x Irfora ATS-25 Max Radio Receiver

3. Disseny i controls del dispositiu

Familiarize yourself with the various buttons, indicators, and screen elements of your ATS-25 Max receiver.

Figure 3.1: Front Panel Controls and Display Overview
This image illustrates the main display and control buttons on the front panel of the Irfora ATS-25 Max receiver. Key elements include the BFO indicator, AGC and ATT indicators, modulation mode indicator, bandwidth indicator, active band indicator, tuning step indicator, MUTE button, frequency unit indicator (MHz/kHz), time display, receiving frequency display, RDS FM station name display, S-meter, volume bar, HAM button, BFO button, STEREO-MONO indicator, VOL button, AGC activator, ATT button, MODE button, NEXT button, STEP key, BAND button, battery level indicator, FREQ button, and BANDW button.

Figure 3.2: Rear Panel Ports and Switches
This image shows the rear panel of the Irfora ATS-25 Max receiver, detailing its connectivity options. From left to right, it features a USB Type-C port for charging and data download, an LED charge indicator, a POWER OFF/ON switch, a 3.5mm phone head (audio output) jack, and a BNC antenna connector. Additionally, there's a switch to select between SSB, LW, MW, FM/SW bands.

4. Configuració

Follow these steps for initial setup of your radio receiver.

1. Càrrega del dispositiu: Connect the receiver to a power source using a Type-C USB cable. The integrated 2000 mAh lithium battery supports a maximum charging current of 1.5 A. Ensure the device is fully charged before first use for optimal battery life.
2. Connexió de l'antena: Attach a suitable antenna to the BNC antenna interface on the rear panel. For optimal reception, ensure the antenna is properly connected and positioned.
3. Encès: Locate the POWER OFF/ON switch on the rear panel and slide it to the 'ON' position. The display will illuminate.

5. Funcionament bàsic

This section covers the fundamental operations of the ATS-25 Max receiver.

• Encès/apagat: Use the POWER OFF/ON switch on the rear panel.
• Control de volum: The volume is adjusted using the encoder. A digital volume bar is displayed on the screen. Pressing the encoder can also activate the volume function.
• Visualització de l'hora: The screen displays the current time, often sourced from RDS FM stations.
• Intensitat del senyal: The S-meter provides a digital display of the radio signal strength.
• Mode/Modulation Selection: Premeu el botó MODE button to access the page for selecting different modulation types (e.g., AM, FM, SSB).
• Passos d'afinació: Utilitza el PAS key to access the selection page for tuning step increments.
• Selecció de la banda: Premeu el botó BANDA button to access the page for selecting broadcast bands or the PERNIL button for amateur bands.
• Bandwidth Selection: Utilitza el BANDW button to access the page for choosing the desired bandwidth in KHz.

6. Funcions avançades

Explore the advanced capabilities of your ATS-25 Max receiver.

6.1. Entrada directa de freqüència

The receiver allows for direct input of frequencies using a numeric keypad on the touchscreen.

Figure 6.1: Frequency Entry Screen
This screen is accessed via the FREQ key. It displays the current frequency and allows for direct manual entry using the numeric keypad. Use the decimal point button to separate MHz for FM bands. The Sortida button discards the entered frequency, CLS clears the entire entry, DEL deletes the last digit, and OK inserts the frequency into the VFO.

6.2. Radio Search Function

The device supports automatic station searching and direct frequency input. It also includes a dedicated short channel for HAM amateur bands. You can activate or deactivate RDS services for FM transmitters and easily view recorded FM transmitters in presets.

6.3. FM Band Scanner

The FM band scanner provides a visual representation of the frequency spectrum.

Figure 6.2: FM Band Scanner Display
This screen displays a graph of frequency (x-axis) versus received signal strength (y-axis). It shows the current frequency, signal quality, and start/end frequencies of the scan. The ESCALA button provides a zoom function, PAUSA temporarily stops the scan (resumes on click, or pauses if encoder is rotated), and PAS changes the scanning step. The TORNAR button exits the graphic scanner function.

6.4. Memory Bank

Store and manage your favorite stations using the memory bank feature.

Figure 6.3: Memory Bank Screen
This screen shows the frequency to be stored and allows for managing memory locations. Use the AFEGIR button to create a new entry; a black bar will appear for station name input via the encoder. Confirm characters by pressing the encoder or screen. Use DEL to delete the last character or press and hold to clear all text. The EDITAR button changes station names, and the DEL button deletes selected memory locations (with confirmation). The TORNAR button exits the memory bank.

6.5. Modes de visualització de la pantalla

The receiver offers various display modes for different functions and preferences.

Figure 6.4: FM and Light Screen Views
The left image shows the screen when the FM button is active, allowing you to switch between FM stations stored in the memory bank for your current location using the encoder. The right image shows the screen with the LLUM button activated, where display brightness can be adjusted via the encoder. This view also features the S-Meter in digital display mode.

6.6. HAM Amateur Band Reception and BFO

Dedicated features for amateur radio enthusiasts.

Figure 6.5: HAM Band Reception and BFO Setting Screens
The left image displays the screen layout for HAM amateur band reception. The right image shows the BFO frequency setting screen, adjustable via the encoder. When the BFO button is activated, the BFO frequency is indicated in Hz. In SSB mode, pressing the 1KHz, 100Hz, or 10Hz digits moves the cursor for fine tuning. The PAS button changes the BFO tuning step (1Hz, 10Hz, 25Hz).

6.7. Modulation Modes and Tuning Steps

Select the appropriate modulation and tuning increments for your listening needs.

Figure 6.6: Modulation and Tuning Step Selection Screens
The left screen allows selection of modulation modes/types (LSB, USB, AM, CW) with the current frequency displayed at the top. Press the corresponding button to select a mode. The right screen is for selecting the tuning step (1KHz, 5KHz, 9KHz, 10KHz), also showing the current frequency at the top. Click a button to apply the indicated tuning step.

7. Especificacions

8. Solució De Problemes

If you encounter issues with your Irfora ATS-25 Max receiver, consider the following:

• El dispositiu no s'encén: Ensure the device is fully charged. Connect it to a power source using the Type-C cable and allow sufficient charging time. Verify the power switch is in the 'ON' position.
• Mala recepció: Check that the antenna is securely connected to the BNC interface. Try repositioning the antenna or moving to an area with better signal coverage. Ensure the correct band and modulation mode are selected for the desired frequency.
• Sense àudio: Verify the volume level is not set to zero or muted. Check headphone connections if applicable.
• La pantalla no respon: If the touchscreen is unresponsive, try restarting the device.

9. Manteniment

Per garantir la longevitat i el rendiment òptim del vostre receptor:

• Neteja: Use a soft, dry cloth to clean the exterior of the device. Avoid using harsh chemicals or abrasive materials. For the touchscreen, use a microfiber cloth.
• Emmagatzematge: Store the receiver in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Cura de la bateria: For long-term storage, it is recommended to charge the battery to approximately 50% every few months to maintain battery health.

10. Garantia i Suport

Information regarding spare parts availability is currently unavailable. For warranty details and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.