1. Introducció
The ToolkitRC M7 is a versatile and compact multifunctional device designed for RC enthusiasts. It integrates a balance charger and discharger, an electric display, a signal measuring device, and a signal source into a single unit. This manual provides essential information for the safe and effective operation of your M7 charger.
Les característiques clau inclouen:
- Potència de sortida millorada: Delivers up to 200W and 10A for efficient charging.
- Intuitive Scroll Wheel: Features a durable scroll wheel sensor for precise control and navigation.
- Vibrant IPS Display: A bright 2-inch IPS LCD with 320x240 resolution and 65,000 colors for clear outdoor viewing.
- Compact Multifunctionality: Small form factor with extensive capabilities including balance charging, discharging, voltage checking, servo testing, ESC testing, and signal generation.
- Simplified User Interface: Designed for ease of use, providing all necessary information intuitively.
2. Instruccions de seguretat
Please read and understand all safety instructions before operating the ToolkitRC M7 charger. Failure to follow these instructions may result in property damage, personal injury, or death.
- Font d'alimentació: Use only a DC power source within the specified input voltage range (7.0-28.0V). Ensure the power supply can provide sufficient current (MAX 12A).
- Compatibilitat de la bateria: Only charge battery types supported by the M7 (Lipo, LiHV, LiFe, Lion, NiMh, Pb) and within the specified cell count range. Attempting to charge incompatible batteries can be dangerous.
- Ventilació: Operate the charger in a well-ventilated area. Do not cover the charger or obstruct its cooling fan during operation.
- Supervisió: Never leave the charging process unattended, especially with LiPo batteries.
- Materials inflamables: Keep the charger and batteries away from flammable materials and liquids.
- Danys: Do not use the charger if it or the battery appears damaged.
- Humitat: Mantingueu el dispositiu sec. No l'exposeu a la humitat ni a la pluja.
- Nens: Mantingueu el carregador fora de l'abast dels nens.
- Desmuntatge: Do not attempt to disassemble or modify the charger. This will void the warranty and may cause harm.
3. Producte acabatview
Figure 3.1: ToolkitRC M7 Balance Charger Discharger and its packaging.
The ToolkitRC M7 is designed for ease of use with a clear display and intuitive controls. Below are diagrams illustrating the main components and their functions.
Figura 3.2: superior view of the M7 charger, highlighting the display, scroll wheel, exit button, output port, and balance port.
Figura 3.3: A baix view of the M7 charger, showing the input port, signal port, cooling fan, and USB output/upgrade port.
The M7 offers a range of functionalities accessible through its simplified interface:
Figura 3.4: Mésview of M7's integrated functions.
The user interface is designed for clarity and ease of navigation, providing essential information at a glance.
Figura 3.5: Example of the M7's simplified interface for charging and signal output.
The M7 also features a robust scroll wheel for precise control and menu navigation.
Figure 3.6: Detail of the M7's scroll wheel for navigation and selection.
4. Especificacions
| Característica | Especificació |
|---|---|
| Mida del producte | 73 x 51 x 27 mm (2.8 x 2.1 x 1.1 polzades) |
| Pes del producte | 90 g (3.17 unces) |
| Pantalla LCD | IPS 2.0 inch LCD, 320*240 Pixel |
| Entrada Voltage | 7.0-28.0V @MAX 12A |
| Tipus de bateries compatibles | Lipo, LiHV, LiFe, Lion (1-6S); NiMh (1-16S); Pb (1-10S) |
| Corrent de saldo | 400mA @2-6S |
| Alimentació del carregador | 200W @MAX 10A |
| Discharge Power (Recycle Mode) | 200W @MAX 10A |
| Discharge Power (Normal Mode) | 10 W @3 A |
| Sortida USB | 2.1A @5.0V (also for firmware upgrade) |
| Entrada PWM | 880-2200us @20-400Hz |
| PPM Input | 880-2200us*8CH @20-50Hz |
| Entrada SBUS | 880-2200us*16CH @20-100Hz |
| Voltage Mesura | 1.0-5.0V @1-6S |
| Mesura de Resistència Interna | 1-99mR @1-6S |
| Sortida ESC | 200W @10A PWM Output |
| Sortida PWM | 500-2500us @20-1000Hz |
| Sortida PPM | 880-2200us*8CH @20-50Hz |
| Sortida SBUS | 880-2200us*16CH @20-100Hz |
| Sortida d’alimentació | 1.0-28.0V @1.0-10A (CC+CV mode) |
| OverCurrent Cutoff Time | <5 ms |
5. Configuració
Follow these steps to set up your ToolkitRC M7 charger for initial use:
- Connecteu l'entrada d'alimentació: Connect a DC power supply (7.0-28.0V, MAX 12A) to the input port on the side of the M7 charger. Ensure the polarity is correct.
- Encès: The M7 will power on automatically once connected to a suitable power source. The IPS display will illuminate.
- Initial Menu Navigation: Use the scroll wheel to navigate through the menu options. Turn the wheel to scroll, and press the wheel to select an option. The 'EXIT-F' button is used to go back or exit a menu.
- Actualització del firmware (opcional): If a firmware update is available, connect the M7 to a computer via the USB port and follow the instructions provided by ToolkitRC.
6. Instruccions de funcionament
6.1. Basic Battery Charging
- Seleccioneu el tipus de bateria: From the main menu, navigate to the "Charge" or "Battery Type" option. Select the correct battery chemistry (e.g., LiPo, LiHV, LiFe, NiMh, Pb) using the scroll wheel.
- Set Cell Count: For Lithium-based batteries, set the correct cell count (e.g., 1S-6S for LiPo).
- Set Charge Current: Adjust the charge current (in Amperes) according to your battery's specifications. A common guideline is 1C (e.g., 5A for a 5000mAh battery).
- Connecta la bateria: Connect the main discharge lead of your battery to the output port (XT60 connector) and the balance lead to the balance port on the M7. Ensure secure connections and correct polarity.
- Comença a carregar: Navigate to the "Start" option and press the scroll wheel to begin the charging process. The display will show real-time charging data such as voltage, corrent i capacitat.
- Supervisar el progrés: Continuously monitor the charging process. The M7 will alert you upon completion or if an error occurs.
- Desconnecta la bateria: Once charging is complete, disconnect the balance lead first, then the main discharge lead.
6.2. Discharging and Storage
The M7 supports discharging and storage modes for various battery types. Select the appropriate mode from the main menu and follow the on-screen prompts to set parameters like discharge current and target voltage.
6.3. Signal Testing and Generation
The M7 can test PWM, PPM, and SBUS signals from receivers and generate signals for servos or ESCs. Connect the component to the signal port and select the desired function from the "Signal" menu.
6.4. Voltage and Internal Resistance Checker
Use the "Voltage" or "Internal Resistance" menu options to check the voltage of individual cells or the overall internal resistance of your battery pack. Connect the balance lead for accurate cell voltage lectures.
7. Manteniment
- Neteja: Regularly clean the exterior of the charger with a soft, dry cloth. Do not use solvents or abrasive cleaners. Ensure no dust or debris accumulates in the cooling fan or ports.
- Emmagatzematge: Store the M7 in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspecció del cable: Periodically inspect all cables and connectors for signs of wear, damage, or corrosion. Replace damaged cables immediately.
- Actualitzacions de firmware: Check the official ToolkitRC weblloc web per a qualsevol actualització de firmware disponible per garantir un rendiment òptim i l'accés a noves funcions.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El carregador no s'encén. | No power input; incorrect input voltage; faulty power supply. | Ensure power supply is connected correctly and provides 7.0-28.0V DC. Test with a different power supply if available. |
| Charging error message displayed. | Incorrect battery type/cell count selected; poor battery connection; damaged battery. | Verify battery type and cell count settings. Check all connections (main and balance leads). Inspect battery for damage. |
| El carregador s'escalfa excessivament. | Poor ventilation; high ambient temperature; excessive charge/discharge current. | Ensure adequate ventilation around the charger. Reduce charge/discharge current. Operate in a cooler environment. |
| La pantalla no respon o es bloqueja. | Error temporal de programari. | Disconnect power, wait a few seconds, then reconnect. If issue persists, check for firmware updates. |
| Vol inexactetage lectures. | Poor balance lead connection; damaged balance lead. | Ensure balance lead is fully and correctly inserted. Inspect balance lead for damage. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact ToolkitRC customer support.
9. Garantia i Suport
For specific warranty information regarding your ToolkitRC M7 charger, please refer to the warranty card included with your product or visit the official ToolkitRC weblloc web. Els termes i condicions de la garantia poden variar segons la regió i el distribuïdor.
For technical support, troubleshooting assistance, or inquiries about parts and service, please contact ToolkitRC customer service through their official channels. Keep your purchase receipt and product serial number handy when contacting support.
