Traxxas 9636T Aluminum Steering Block Arms

Producte acabatview

The Traxxas 9636T Aluminum Steering Block Arms are designed to enhance the durability and appearance of your compatible Traxxas remote-controlled vehicle. These brightly-anodized orange aluminum arms serve as direct replacements or upgrades for the steering block components, providing improved strength over standard parts.

Image: Traxxas 9636T Aluminum Steering Block Arms (Orange).

Contingut del paquet

The Traxxas 9636T package includes the following components:

• (2) Aluminum Steering Block Arms (Left and Right)
• (4) Cargols de muntatge

Compatibilitat

These aluminum steering block arms are compatible with the following Traxxas models and series:

• Traxxas Sledge
• Vehicles utilizing 9637-series steering blocks
• Vehicles utilizing 9635-series steering blocks

Instruccions d'instal·lació

This section provides a general guide for installing the Traxxas 9636T Aluminum Steering Block Arms. For detailed, vehicle-specific disassembly and reassembly procedures, always consult your vehicle's official service manual.

1. Eines de preparació: Gather the necessary tools, which typically include appropriate hex wrenches or small screwdrivers for your vehicle's fasteners.
2. Remove Existing Arms: Carefully remove the screws securing the existing steering block arms to your vehicle's steering assembly. Note the orientation of the arms and any shims or spacers.
3. Position New Arms: Place the new Traxxas 9636T aluminum steering block arms onto the steering blocks. Ensure that the left and right arms are installed on their respective sides.
4. Secure Arms: Use the provided mounting screws to attach the new arms. Tighten the screws firmly but avoid overtightening, which can strip threads or damage components.
5. Torneu a muntar: Reinstall any other components that were removed during the process, such as tie rods or suspension links.
6. Funcionalitat de prova: After installation, manually check the steering mechanism to ensure it moves freely and smoothly without any binding or excessive play.

Especificacions

• Dimensions del producte: 4.4 x 3.2 x 0.3 polzades
• Pes de l'article: 0.48 unces
• Número de model de l'article: 9636T
• Fabricant: Traxxas

Manteniment

Proper maintenance ensures the longevity and performance of your aluminum steering block arms:

• Inspecció periòdica: Periodically inspect the arms for any signs of damage, such as bends, cracks, or excessive wear.
• Neteja: Keep the steering assembly clean from dirt, dust, and debris. Use a soft brush or compressed air to remove contaminants.
• Comprovació de fixació: Regularly check the tightness of all mounting screws. Loose screws can lead to poor performance or component loss, while overtightening can strip threads.
• Eviteu productes químics durs: Do not expose the anodized aluminum parts to harsh chemicals or solvents, as this can damage the finish.

Resolució de problemes

If you encounter issues after installing the steering block arms, consider these common troubleshooting steps:

• Steering Binding: Ensure all screws are tightened correctly and not overtightened. Check for any debris obstructing movement. Verify that the arms are installed in the correct orientation (left/right).
• Loose Steering: Confirm all mounting screws are secure. Inspect other steering components for wear or damage.
• Soroll inusual: Disassemble and reassemble the steering area, ensuring all parts are correctly seated and lubricated where appropriate (refer to your vehicle's manual).

Garantia i Suport

For warranty information or technical support regarding your Traxxas 9636T Aluminum Steering Block Arms, please refer to the official Traxxas weblloc or contact their customer service directly. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.