1. Introducció
Thank you for choosing the Lezyne Classic Drive 500+ and Zecto Drive 200+ bicycle light set. This manual provides essential information for the proper installation, operation, and maintenance of your new lights, ensuring optimal performance and safety during your rides. This set is designed to enhance your visibility and illuminate your path, contributing to a safer cycling experience.
The Lezyne Classic Drive 500+ front light and Zecto Drive 200+ rear light, shown together.
2. Contingut del paquet
Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:
- 1 x Lezyne Classic Drive 500+ Front Light
- 1 x Lezyne Zecto Drive 200+ Rear Light
- Mounting Straps (pre-attached or included separately)
- Note: A USB-C charging cable is not included and must be supplied by the user.
The Classic Drive 500+ front light and Zecto Drive 200+ rear light, ready for use.
3. Configuració i instal·lació
3.1 Càrrega inicial
Before first use, fully charge both the front and rear lights. Connect the lights to a USB power source (e.g., computer USB port, wall adapter) using a compatible USB-C cable (not included). The charging indicator light will show charging status and turn solid when fully charged.
3.2 Mounting the Classic Drive 500+ Front Light
- Identify a suitable location on your handlebar, ensuring the light beam is unobstructed.
- Wrap the integrated silicone strap around the handlebar.
- Hook the strap onto the light's mounting tab, ensuring a secure and snug fit.
- Adjust the light angle to illuminate the road ahead without blinding oncoming traffic.
A Lezyne front light securely mounted on bicycle handlebars.
3.3 Mounting the Zecto Drive 200+ Rear Light
The Zecto Drive 200+ features a patented 2-in-1 clip and strap mounting system, allowing versatile attachment.
- Seatpost Mounting: Use the integrated silicone strap to secure the light around your seatpost. Ensure the light faces directly backward.
- Clip Mounting: The integrated clip allows attachment to saddlebags, backpacks, or clothing loops for enhanced visibility.
4. Instruccions de funcionament
4.1 Encès/Apagat
Per encendre la llum ON, press and hold the power button for approximately 2 seconds. To turn the light OFF, press and hold the power button for approximately 2 seconds again.
4.2 Changing Modes
Both the Classic Drive 500+ and Zecto Drive 200+ offer multiple output modes to suit various riding conditions and preferences. To cycle through the modes, briefly press the power button while the light is on.
- Classic Drive 500+ (Front Light): Features six output modes, including a powerful Daytime Flash mode for increased visibility during daylight hours.
- Zecto Drive 200+ (Rear Light): Provides various flash and steady modes for optimal rear visibility.
The powerful beam of a Lezyne front light illuminating the path.
Multiple Zecto Drive rear lights demonstrating their bright red illumination.
4.3 Indicador de bateria
The power button on both lights also serves as a battery life indicator. The color of the LED behind the button will change to indicate the remaining battery charge:
- Verd: Full to high charge
- groc: Càrrega mitjana
- Vermell: Càrrega baixa, recarrega aviat
- Vermell intermitent: Critically low charge, recharge immediately
5. Manteniment i cura
5.1 Neteja
To maintain optimal performance and appearance, clean your lights regularly. Use a soft, damp cloth to wipe down the exterior. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or internal components.
The lights are rigorously tested to IPX7 Waterproofing standards, meaning they can withstand immersion in water up to 1 meter for 30 minutes. This makes them suitable for use in various weather conditions, but they should not be intentionally submerged for extended periods.
Water droplets on a Lezyne light, showcasing its weather-resistant design.
5.2 Cura de la bateria
- Recharge the battery before it is completely depleted to prolong its lifespan.
- If storing the lights for an extended period, charge them to approximately 50% and store in a cool, dry place. Recharge every few months to prevent deep discharge.
- Use only the recommended USB-C cable and a standard USB power source for charging.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | La bateria està esgotada. | Carregueu la llum completament. |
| La llum no s’encén. | Power button not pressed long enough. | Manteniu premut el botó d'encesa durant 2 segons. |
| La llum no carrega. | Faulty USB-C cable or power source. | Try a different USB-C cable or USB power source. Ensure connections are secure. |
| La llum parpelleja o s'apaga inesperadament. | Bateria baixa. | Recarrega la llum. |
| Light mount is loose. | Strap not tightened sufficiently. | Re-adjust and tighten the mounting strap securely. |
7. Especificacions
Classic Drive 500+ (Front Light)
- Sortida màxima: Més de 500 lúmens
- Temps d'execució màxim: Fins a 80 hores
- Modes: Six output modes, including Daytime Flash
- Construcció: Machined aluminum body
- Resistència a l'aigua: Estàndard IPX7
- Font d'alimentació: Bateria recarregable
Zecto Drive 200+ (Rear Light)
- Sortida màxima: Més de 200 lúmens
- Temps d'execució màxim: Fins a 35 hores
- Modes: Multiple flash and steady modes
- Construcció: Durable composite matrix with aluminum faceplate
- Resistència a l'aigua: Estàndard IPX7
- Font d'alimentació: Bateria recarregable
General Specifications (Both Lights)
- Muntatge: Patented 2-in-1 clip and strap mounting system
- Càrrega: USB-C (cable not included)
- Color: Satin Black / Black
- Tema: Seguretat en bicicleta
- Usos específics: Road, Trail
- Fabricant: Lezyne
- Número de model: 1-LED-29P-V737
8. Garantia i Suport
Lezyne products are manufactured to the highest quality standards. For detailed warranty information, product registration, or technical support, please visit the official Lezyne weblloc web o contacteu directament amb el seu servei d'atenció al client.
Podeu trobar més informació i recursos de suport visitant la Botiga LEZYNE a Amazon.
