1. Introducció
This manual provides essential information for the safe and efficient operation of your Igloo Top Loading Water Cooler. This appliance dispenses both hot and cold water, accommodating 3 and 5-gallon water bottles. Please read all instructions carefully before use.

Figure 1: Igloo Top Loading Water Cooler with a 5-gallon bottle.
2. Precaucions de seguretat
- Always ensure the appliance is plugged into a grounded electrical outlet.
- Do not operate the water cooler if the power cord is damaged.
- Manteniu l'aparell lluny de la llum solar directa i de les fonts de calor.
- The hot water dispenser is equipped with a child safety lock. Always engage this lock to prevent accidental burns.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat. No bloquegeu les reixetes de ventilació.

Figure 2: Hot water dispenser with child safety lock for enhanced safety.
3. Configuració i instal·lació
3.1 Col·locació
Place the water cooler on a flat, stable surface in a cool, dry location. Ensure there is adequate space (at least 4 inches) from walls to allow for proper air circulation around the back of the unit.
3.2 Loading the Water Bottle
- Remove the protective seal from the neck of a 3 or 5-gallon water bottle.
- Carefully invert the water bottle and place it securely onto the top-loading receptacle of the dispenser. Ensure it is seated firmly to prevent leaks.
- Allow the water to fill the internal reservoirs for a few minutes before plugging in the unit.

Figure 3: The water cooler supports both 3 and 5-gallon water bottles.
3.3 Engegada inicial
- Once the water bottle is loaded and reservoirs are filled, plug the power cord into a grounded electrical outlet.
- Locate the hot and cold power switches on the back of the unit. Turn both switches to the 'ON' position.
- Allow approximately 15-20 minutes for the water to reach optimal hot and cold temperatures. Indicator lights on the front panel will illuminate when ready.

Figure 4: Rear switches for controlling hot and cold water functions.
4. Instruccions de funcionament
4.1 Dispensació d'aigua freda
Place your cup under the blue cold water spigot. Press the blue paddle to dispense cold water. Release the paddle to stop the flow.
4.2 Distribució d'aigua calenta
Place your cup under the red hot water spigot. To dispense hot water, you must first slide the child safety lock (usually a small button or lever above the red paddle) and then press the red paddle. Release the paddle to stop the flow.

Figure 5: Hot and cold water dispensing paddles with child safety lock on the hot water side.
4.3 Llums indicadors
- Indicador d'aigua calenta: Illuminates when the hot water is heating and turns off when the desired temperature is reached.
- Indicador d'aigua freda: Illuminates when the cold water is cooling and turns off when the desired temperature is reached.
- Indicador d'alimentació: Indica que la unitat està encesa.
4.4 Vídeos de productes
Vídeo 1: Un usuari review demonstrating the easy and safe operation of the Igloo Water Dispenser.
Vídeo 2: Una revisió detalladaview of the Igloo Top Loading Hot and Cold Water Dispenser.
Video 3: A user's review of the Top Loading Water Cooler.
Video 4: Important information to know about this water dispenser.
5. Cura i Manteniment
5.1 Neteja de la safata de degoteig
The water cooler features a removable drip tray for easy cleaning. Regularly remove and empty the drip tray to prevent overflow and maintain hygiene. Wash with mild soap and water, then rinse thoroughly and replace.

Figure 6: The removable drip tray simplifies cleaning.
5.2 Neteja general
Netegeu l'exterior del dispensador amb un drap suau iamp cloth. Do not use abrasive cleaners or solvents. For internal cleaning, consult the full product manual for detailed instructions on sanitizing the water reservoirs.
6. Solució De Problemes
If you experience issues with your water cooler, please refer to the following general advice:
- Sense dispensació d'aigua: Ensure the water bottle is correctly seated and not empty. Check that the power cord is securely plugged in.
- Aigua no prou calenta/freda: Verify that the hot and cold switches on the back of the unit are in the 'ON' position. Allow sufficient time for the unit to reach temperature.
- Fuites: Check the water bottle for cracks or improper seating. Ensure the drip tray is correctly installed.
For more detailed troubleshooting, please refer to the comprehensive manual provided with your product or contact customer support.
7. Especificacions del producte
| Característica | Especificació |
|---|---|
| Marca | Iglú |
| Model | Top Loading Water Cooler |
| Color | Inoxidable |
| Material | Acer inoxidable |
| Capacitat | 3 & 5 Gallons (bottles not included) |
| Dimensions del producte | 12.8 "P x 13.14" W x 37.8" H |
| Pes | 25 Pounds (unit only) |
| Wattage | 580 watts |
| Tipus d'instal·lació | Autònom |
| Localització d'accés | A dalt |
| Nombre de configuracions | 2 (Calent, Fred) |
| Classificació de temperatura superior | 212 Degrees Fahrenheit (Hot) |
| Font d'alimentació | Elèctric amb cable |
| UPC | 810061703570 |

Figure 7: Dimensions of the Igloo Top Loading Water Cooler.
8. Garantia i Suport
For warranty information or technical support, please refer to the warranty card included with your product or visit the official Igloo weblloc. Conserveu el rebut de compra per a reclamacions de garantia.





