Introducció
Thank you for choosing the Poolcandy Remote Controlled Motorized Baby Splash Runner. This manual provides essential information for the safe and proper setup, operation, and maintenance of your new pool float. Please read all instructions carefully before use and retain this manual for future reference.
Informació important de seguretat
WARNING: This is not a life-saving device. Always provide constant supervision to children in and around water. Never leave a child unattended while using this product.
- Per a edats de 1 a 4 anys.
- Maximum weight limit: 30 pounds.
- Ensure the float is fully inflated before placing a child inside.
- No inflar massa.
- Mantenir allunyat d'objectes punxeguts i fonts de calor.
- Only use in water where the child is within their depth and under adult supervision.
- Inspect the product for damage before each use. Do not use if damaged.
Contingut del paquet
- 1 x Motorized Baby Splash Runner Float
- 1 x Waterproof Remote Control
- 1 x Kit de pegats de reparació
- 1 x Manual d'instruccions (aquest document)
Configuració
1. Inflació
Locate the air valves on the float. Use an air pump (not included) to inflate the float until it is firm to the touch but not rigid. Ensure all valves are securely closed after inflation to prevent air leakage.
2. Instal·lació de la bateria
The float requires 6 D-Cell batteries, and the remote control requires 2 AAA batteries (batteries not included).
- For the Float: Locate the battery compartment on the underside of the float. Unscrew the cover, insert 6 D-Cell batteries according to the polarity indicators (+/-), and securely replace the cover. Ensure the cover is tightly sealed to maintain waterproofing.
- Per al comandament a distància: Locate the battery compartment on the back of the remote. Open the cover, insert 2 AAA batteries according to the polarity indicators (+/-), and securely replace the cover.
Always use new batteries and ensure they are installed correctly. Do not mix old and new batteries or different types of batteries.
Funcionament
1. Placing the Child in the Float
Carefully place the child into the float, ensuring their legs are comfortably positioned through the leg holes. The float is designed with leg holes to hold your baby securely in place. Always ensure the child is seated upright and stable.
Image: A young child seated in the Poolcandy Baby Splash Runner float, ready for use in the pool.
2. Ús del comandament a distància
The remote control allows you to steer and move the float from a distance. It is waterproof and designed to float. The remote works up to 75 feet away.
Image: A child's hand interacting with the remote control buttons on the float.
Image: An adult in the pool operating the remote control for the Baby Splash Runner, with a child enjoying the ride.
- The remote has buttons for forward, backward, left, and right movement.
- Press and hold the desired direction button to move the float.
- The propellers are housed in a protected, child-safe casing on the underside of the float.
Image: The underside of the float, highlighting the protected propeller housing.
3. Vídeo oficial del producte
Video: This video demonstrates the Poolcandy Baby Runner motorized kids pool float in action, showing how parents can control the float with a remote while their child enjoys the ride in the pool. It highlights the ease of use and the fun experience for both child and parent.
Manteniment
1. Neteja
After each use, rinse the float with fresh water to remove chlorine or salt. Wipe it down with a soft cloth and mild soap if necessary. Do not use harsh chemicals or abrasive cleaners.
2. Drying and Storage
Ensure the float is completely dry before deflating and storing. Store in a cool, dry place away from direct sunlight and extreme temperatures. Remove all batteries from both the float and the remote control if storing for an extended period to prevent corrosion.
3. Repairing Punctures
In case of a small puncture, use the included repair patch kit. Clean and dry the area around the puncture, apply the patch firmly, and allow it to cure for several hours before re-inflating.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Float not moving or moving slowly. | Low batteries in float or remote; Obstruction in propellers; Water in battery compartment. | Replace batteries; Check and clear propellers; Ensure battery compartment is sealed and dry. |
| El comandament a distància no respon. | Low batteries in remote; Out of range; Interference. | Replace remote batteries; Move closer to the float (within 75 ft); Try in a different area. |
| Float losing air. | Valve not closed properly; Puncture. | Ensure valves are tightly sealed; Locate puncture and use repair patch kit. |
Especificacions
- Marca: Poolcandy
- Nom del model: Remote Control Motorized Baby Runner Boat
- Número de model: PC1035BBY
- UPC: 814092024956
- Material: Heavy Duty PVC Plastic
- Color: Blau
- Product Dimensions (LxW): 35.43 cm x 24 cm
- Pes de l'article: 4 lliures
- Franja d'edat: 1 a 4 anys
- Límit de pes: 30 lliures
- Característiques especials: Waterproof Remote Control, Motorized Baby Boat, Protected Propeller Housing
- Font d'alimentació: 6 D-Cell batteries (float), 2 AAA batteries (remote) - not included
Garantia i Suport
The Poolcandy Baby Runner Motorized Pool Lounger comes with a 60-day warranty, delivering unrivaled confidence in your purchase by B&D Group. For any support inquiries or warranty claims, please contact the manufacturer directly through their official channels or refer to your purchase documentation for contact information.
