Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Idemia Sigma Lite+ Biometric Access Control/Time and Attendance Fingerprint Station. This device is designed for secure access control and efficient time tracking, featuring biometric fingerprint recognition and HID iClass card compatibility. It includes an embedded web server for easy management and is rated IP65 for environmental resistance and vandal resistance for durability.
Figura 1: Frontal view of the Idemia Sigma Lite+ device, showing the touchscreen display with various function icons and the fingerprint sensor below.
Informació de seguretat
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in injury, damage to the device, or voiding the warranty.
- Ensure power supply matches device specifications (12 Volts DC).
- Do not expose the device to extreme temperatures or humidity beyond its IP65 rating.
- Avoid direct sunlight exposure for prolonged periods.
- Només personal qualificat ha de fer la instal·lació i el manteniment.
- Desconnecteu l'alimentació abans de netejar o fer el manteniment del dispositiu.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Idemia Sigma Lite+ Biometric Fingerprint Station
- Plantilla de muntatge
- Maquinari de muntatge (cargols, ancoratges)
- Wiring Harness/Connectors
- Guia d'inici ràpid
- Targeta de garantia
Configuració
1. Instal·lació física
The Sigma Lite+ is designed for wall mounting. Choose a secure location, preferably near the access point it will control.
- Use the provided mounting template to mark drilling points on the wall.
- Perforeu forats i inseriu ancoratges de paret si cal.
- Secure the mounting bracket (if applicable) or the device directly to the wall using the provided screws.
- Ensure the device is firmly attached and level.
2. Cablejat i connexió elèctrica
Connect the device to a stable 12V DC power source and any necessary network or access control system wiring.
- Connect the 12V DC power supply to the designated power input terminals. Observe polarity.
- For network connectivity, connect an Ethernet cable to the RJ45 port.
- Connect Wiegand or OSDP wires to the respective terminals for integration with an access control panel.
- Assegureu-vos que totes les connexions estiguin segures i aïllades.
Figura 2: Angle view of the Idemia Sigma Lite+ highlighting its compact design and the illuminated fingerprint sensor, indicating readiness for use.
3. Configuració Inicial
Upon first power-up, the device will initiate. Access the embedded web server for detailed configuration.
- Connect a computer to the same network as the Sigma Lite+.
- Obre a web browser and enter the device's default IP address (refer to Quick Start Guide or network scan).
- Log in using the default administrator credentials.
- Configure network settings (static IP, DHCP), date/time, and administrator password.
- Set up basic access control parameters and user groups.
En funcionament
1. User Enrollment
Users can be enrolled via the device's touchscreen or the web interfície del servidor.
- Registre d'empremta digital: Guide the user to place their finger on the sensor multiple times until enrollment is complete. Ensure proper finger placement for optimal recognition.
- Card Enrollment: Present the HID iClass card to the device's reader until the card ID is registered.
- Assign appropriate access rights and time profiles to each enrolled user.
2. Control d'accés
To gain access, users must present their registered credential.
- Verificació d'empremta digital: Place a registered finger on the sensor. A green light and audible confirmation indicate successful verification and access granted.
- Card Verification: Present a registered HID iClass card to the reader. A green light and audible confirmation indicate successful verification and access granted.
- In case of denial, a red light and specific error message will be displayed.
3. Time and Attendance
The device automatically records timestamps for each successful access event, which can be used for time and attendance tracking.
- Accedeix al web servidor a view and export attendance logs.
- Logs include user ID, timestamp, and event type (e.g., IN/OUT).
- Integrate with third-party time and attendance software for advanced reporting.
4. Integrat Web Gestió del servidor
El web server provides a comprehensive interface for device management.
- Manage users: add, edit, delete users and their credentials.
- Configure device settings: network, date/time, security policies.
- Monitor real-time events and view registres d'esdeveniments.
- Perform firmware updates and system backups.
Manteniment
1. Neteja
Regular cleaning ensures optimal performance and longevity.
- Utilitzeu un drap suau i sense pelusa lleugerament dampnetejat amb aigua o un netejador suau i no abrasiu.
- Gently wipe the touchscreen and fingerprint sensor.
- No utilitzeu productes químics agressius, dissolvents ni materials abrasius.
- Assegureu-vos que no entri líquid a les obertures del dispositiu.
2. Actualitzacions de firmware
Periodically check for firmware updates on the manufacturer's weblloc per garantir un rendiment i una seguretat òptims.
- Download the latest firmware from the Idemia support portal.
- Access the firmware update section via the embedded web servidor.
- Follow the on-screen instructions to perform the update. Do not power off the device during the update process.
3. Còpia de seguretat de dades
Regularly back up user data and configuration settings to prevent data loss.
- Use the backup function available in the embedded web servidor.
- Store backup files in a secure, off-device location.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | Sense subministrament elèctric; cablejat incorrecte. | Check power connection and ensure 12V DC supply. Verify wiring polarity. |
| Empremta digital no reconeguda. | Finger not properly placed; dirty sensor; user not enrolled. | Ensure finger covers the entire sensor. Clean the sensor. Re-enroll fingerprint if necessary. |
| Card not read. | Card not compatible; card not enrolled; faulty card. | Verify card type (HID iClass). Enroll the card. Try a different card. |
| No es pot accedir web servidor. | Incorrect IP address; network issue; firewall. | Verify device IP address. Check network cable and connectivity. Temporarily disable firewall. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Idèmia |
| Número de model | 293673644 |
| Pes de l'article | 1 lliures |
| Voltage | 12 volts (CC) |
| Tipus de visualització | Pantalla tàctil |
| Classificació de protecció d'entrada (IP). | Classificació IP65 |
| Característiques | Biometric Fingerprint, HID iClass Cards, Embedded Web Server, Vandal Resistant |
Informació de la garantia
This product is covered by a manufacturer's limited warranty. Please refer to the warranty card included in your package or visit the official Idemia weblloc web per conèixer els termes i condicions detallats. Conserveu el comprovant de compra per a reclamacions de garantia.
Suport
For technical assistance, troubleshooting, or further inquiries, please contact Idemia customer support:
- Weblloc: www.idemia.com/support
- Correu electrònic: support@idemia.com
- Telèfon: Refer to your region's contact information on the support weblloc.
