Manual d'usuari de l'inversor solar híbrid Anern ECO-4200 de 4200 W i 24 V

1. Introducció

This manual provides comprehensive instructions for the safe and efficient operation of your Anern ECO-4200 4200W 24V Hybrid Solar Inverter. This all-in-one unit combines the functions of an inverter, solar charger, and battery charger to provide uninterrupted power support. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Informació de seguretat

AVÍS: Si no es segueixen aquestes instruccions de seguretat, es poden produir descàrregues elèctriques, incendis o lesions greus.

• La instal·lació ha de ser realitzada per personal qualificat.
• Assegureu-vos que tot el cablejat compleixi amb els codis elèctrics locals i nacionals.
• No desmunteu l'inversor. No hi ha peces a l'interior que l'usuari pugui reparar.
• Disconnect all power sources (PV array, battery, utility) before performing any maintenance or wiring.
• This inverter is designed for 220V/230V AC output. It does not support 110V/120V AC output directly or parallel operation. For 110V/120V appliances, an external step-down converter (not included) is required.
• Assegureu-vos una ventilació adequada al voltant de l'inversor per evitar el sobreescalfament.
• Avoid installing the inverter in direct sunlight, high humidity, or dusty environments.

3. Característiques del producte

The Anern ECO-4200 Hybrid Solar Inverter offers advanced functionalities for reliable power management:

• Sortida d'ona sinusoïdal pura: Provides high-quality AC power suitable for sensitive electronics.
• Controlador de càrrega MPPT integrat: Features a 120A Maximum Power Point Tracking (MPPT) solar charge controller for efficient solar energy harvesting.
• Paràmetres configurables: LCD display allows configuration of input voltage range for home appliances or personal computers, battery charging current, and AC/solar charger priority.
• Versatile Power Source Compatibility: Compatible amb la xarxa elèctrica o el generador.
• Reinici automàtic: Automatically restarts when AC power is restored.
• Protecció integral: Includes overload, over-temperature, and short-circuit protection.
• Carregador de bateria intel·ligent: Designed to optimize battery performance and extend lifespan.
• Funció d'arrencada en fred: Enables the inverter to start without an AC input.
• Dual AC Output: Features a primary output of 4200W and a secondary output of 1400W. The secondary output can maintain power during low battery or no mains conditions to save energy.
• Compatibilitat de la bateria: Supports various battery types including GEL, FLD, Li-on (Lithium), and AGM.
• Monitorització de Wi-Fi: Allows control and monitoring of the system via a mobile application.

Imatge: Més deview of the Anern ECO-4200 inverter highlighting multiple protection features, Wi-Fi monitoring capability, and its ability to operate with or without a battery.

4. Instal·lació

This section outlines the basic system architecture and wiring for the Anern ECO-4200 Hybrid Solar Inverter. Consult a qualified system integrator for specific requirements.

4.1 Arquitectura bàsica del sistema

The inverter/charger forms the core of your solar power system. A complete operational system typically includes:

• The Anern ECO-4200 Hybrid Solar Inverter
• PV Modules (Solar Panels)
• Battery Bank (e.g., 48V lead-acid or lithium battery)
• Utility Grid or Generator (as an optional AC input source)

4.2 Esquema de cablejat

Refer to the diagram below for a typical wiring configuration. Ensure all connections are secure and correctly polarized.

Image: Detailed wiring diagram illustrating connections for photovoltaic panels, battery bank, AC input from utility or generator, and AC output to household loads. Recommended wire gauges and fuse sizes are indicated.

Key Wiring Recommendations:

• Photovoltaic (PV) Input: Volum màxim de circuit oberttage 500VDC. MPPT PV voltage range 90VDC-450VDC. Suggested wire: 10 AWG/6mm². Connect panels in series.
• Connexió de la bateria: For a 48V battery system, use 2 AWG cable (25mm²) and a 150A fuse.
• Entrada de CA: Volum màxim d'entrada de CAtage 300VAC. Max AC charging current 160A. Suggested cable: 10 AWG/6mm². Recommended switch: 63A.
• Sortida de CA: Rated output 220V/230V. Suggested cable: 10 AWG/6mm². Recommended switch: 63A.

Important Note: The inverter output is 230V. A separate converter (not included) is required for 110V appliances.

5. Instruccions de funcionament

The inverter features an LCD display for monitoring and configuring operational parameters.

5.1 Configurable Settings via LCD

You can adjust various settings to suit your application requirements:

• Entrada Voltage Rang: Select between appliance mode or personal computer mode.
• Corrent de càrrega de la bateria: Adjust the charging current based on your battery specifications.
• Charger Priority: Set the priority for AC charger or solar charger.

5.2 Charge Modes

The inverter supports four distinct charge modes:

1. Solar Primer: Prioritza l'energia solar per a la càrrega.
2. Utilitat Primer: Prioritza l'energia elèctrica per a la càrrega.
3. Solar i serveis públics: Uses both solar and utility power for charging.
4. Battery and Solar: Charges from both battery and solar (specific to certain configurations).

5.3 Modes de sortida

Three output modes are available to manage power distribution:

1. Prioritat solar: Prioritza l'energia solar per a les càrregues.
2. Prioritat d'utilitat: Prioritza l'energia elèctrica per a les càrregues.
3. Mode SBU (Bateria Solar-Utilitat): Prioritza l'energia solar, després la bateria i finalment els serveis públics per a les càrregues.

The inverter can power various household and office appliances, including refrigerators, lamps, fans, and air conditioners.

Image: The Anern ECO-4200 inverter demonstrating compatibility with a wide range of household and office appliances, including coffee makers, toasters, and kettles.

6. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre inversor.

• Neteja: Keep the inverter's exterior clean and free from dust. Use a dry cloth. Do not use liquid cleaners.
• Ventilació: Ensure ventilation openings are clear and unobstructed. The intelligent variable speed fan helps dissipate heat efficiently.
• Connexions: Comproveu periòdicament totes les connexions elèctriques per comprovar si estan ben ajustades i si hi ha signes de corrosió.
• Medi ambient: Maintain the inverter in a cool, dry, and well-ventilated area.

7. Solució De Problemes

Aquesta secció ofereix orientació per a problemes comuns. Per a problemes complexos, contacteu amb l'assistència tècnica.

• L'inversor no s'encén: Comproveu les connexions de la bateria, el volum de la bateriatage, and AC input (if applicable). Ensure the power switch is in the 'ON' position.
• Sense sortida de CA: Verify input power sources (PV, battery, utility). Check for overload or short-circuit conditions. The inverter has built-in protection that may temporarily shut down output.
• Low Battery Performance: Ensure correct battery type settings are configured. Check battery health and charging current settings.
• Avís de sobrecàrrega: Reduce the connected load. The inverter will automatically attempt to restart after an overload event.
• Over-temperature Warning: Ensure adequate ventilation. Clear any obstructions from the fan or vents.

8. Especificacions

Detailed technical specifications for the Anern ECO-4200 4200W 24V Hybrid Solar Inverter.

Image: Summary of key technical specifications for the Anern 4200W Hybrid Solar Inverter, including Max. AC Output, Max. MPPT PV Charging Current, Minimum voltage for solar modules, and Max. PV Array Open Circuit Voltage.

9. Garantia i Suport

For warranty information and technical support, please refer to the documentation included with your product or visit the official Anern weblloc. Conserveu el rebut de compra per a reclamacions de garantia.