1. Introducció
This manual provides detailed instructions for the assembly, usage, maintenance, and troubleshooting of your Tribesigns 6-Tier Plant Stand, Model JW0710. Please read this manual thoroughly before assembly and use to ensure proper setup and safe operation.
2. Informació de seguretat
- Capacitat de pes: Do not exceed the maximum load capacity of 350 pounds for the entire unit. Distribute weight evenly across shelves.
- Estabilitat: For enhanced stability, especially in homes with children or pets, it is recommended to secure the plant stand to a wall using the provided anti-tip hardware.
- Muntatge: Ensure all screws and fasteners are tightened securely before use. Periodically check for loose connections.
- Col·locació: Place the plant stand on a level, stable surface. Avoid placing it in areas with excessive moisture or direct heat sources.
- Nens i animals de companyia: Keep small parts away from children and pets during assembly. Do not allow children to climb on the stand.
3. Contingut del paquet
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Components del marc metàl·lic
- Engineered Wood Shelf Boards
- 10 Hanging Hooks
- Coixinets de peu ajustables
- Maquinari de muntatge (cargols, clau Allen, etc.)
- Maquinari antibolcada
- Manual d'instruccions
4. Instruccions de muntatge
Follow these steps carefully for proper assembly. An Allen wrench is included for your convenience.
- Desempaquetar i identificar les peces: Lay out all components on a clean, soft surface to prevent scratches. Match each part to the corresponding label in the parts list.
- Muntar el marc base: Connect the lower metal frame sections according to the diagrams. Ensure the orientation of each piece is correct before tightening screws. Tip: Some users find it helpful to pre-install screws into holes before attaching parts, then remove them and re-insert during final assembly to ensure easier threading.
- Attach Shelf Boards: Secure the engineered wood shelf boards to the assembled frame using the provided hardware. Pay attention to the varying sizes and positions of the shelves to match the design.
- Assemble Upper Frame and Top Grid: Attach the upper metal frame sections and the top grid, which includes the hanging hook rail.
- Instal·leu els ganxos per penjar: Place the 10 S-hooks onto the top grid for hanging plants or other items.
- Ajustar les coixinetes dels peus: Once the stand is upright, adjust the foot pads at the bottom to ensure the unit is level and stable on your floor.
- Fixar a la paret (opcional però recomanat): Attach the anti-tip hardware to the top of the plant stand and to a wall stud using appropriate tools. This step is crucial for safety.
Figure 1: Product Dimensions for reference during assembly.
Figure 2: Key features including hanging hooks, wood grain, and adjustable feet.
5. Ús
The Tribesigns 6-Tier Plant Stand is designed to display a variety of plants and decorative items. Its multi-level design allows for optimal sunlight exposure for your plants.
- Col·locació de plantes: Arrange potted plants on the various shelves. The staggered design accommodates different plant heights.
- Articles penjants: Utilize the 10 included S-hooks on the top grid to hang smaller potted plants, terrariums, or other decorative elements.
- Pantalla versàtil: Beyond plants, this stand can also be used to display books, small sculptures, or other home decor items, adding a functional and aesthetic touch to any room.
Video 1: Official product video demonstrating the features and various display possibilities of the Tribesigns 6-Tier Plant Stand, including its sturdy construction, high-quality boards, multi-layer design, and adjustable feet pads.
Figure 3: The plant stand showcasing a variety of plants in a living room environment.
6. Manteniment
Proper care will extend the life and appearance of your plant stand.
- Neteja: Wipe down the metal frame and engineered wood shelves with a soft, damp drap. Eviteu productes químics agressius o netejadors abrasius.
- Cura de la fusta: The engineered wood shelves have a finished surface. To prevent water damage or staining, use coasters or trays under potted plants. Immediately wipe up any spilled water.
- Inspecció periòdica: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
7. Solució De Problemes
Si teniu algun problema, consulteu les solucions habituals següents:
| Problema | Causa possible | Solució |
|---|---|---|
| El suport està inestable | Sòl irregular; connexions fluixes | Adjust the foot pads at the base until stable. Tighten all screws. Consider using anti-tip hardware. |
| Screws are difficult to insert | Misalignment; new screw threads | Ensure parts are correctly aligned. Try pre-installing screws into the holes without the mating part, then remove and re-insert during final assembly. |
| Falten peces | Error d'embalatge | Contact Tribesigns customer service with your purchase details. |
8. Especificacions
- Dimensions (L x A x A): 47.24 x 11.81 x 70.87 polzades
- Pes de l'article: 43.1 lliures (19.6 quilograms)
- Capacitat de càrrega: 350 lliures
- Material: Fusta dissenyada, Metall
- Tipus d'acabat: Painted or similar
- Forma: Gerro
- Muntatge requerit: Sí
- Número de model: JW0710
- UPC: 036659071276
9. Garantia i Suport
Tribesigns provides an 18-month warranty for this product. For any questions, concerns, or assistance, please contact our customer service team. We are committed to providing a satisfactory response within 24 hours.
