Pro-Ject VC-S3 Premium Record Cleaning Machine User Manual

Introducció

The Pro-Ject VC-S3 is a premium record cleaning machine designed to effectively remove dirt, dust, and static from your vinyl records, ensuring optimal playback quality and longevity. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your VC-S3 unit.

Pro-Ject VC-S3 Premium Record Cleaning Machine, angled view

Imatge: Anglesa view of the Pro-Ject VC-S3 Premium Record Cleaning Machine, showcasing its silver finish and compact design. A record is placed on the platter with the vacuum arm positioned over it.

Característiques del producte

Superfast & super strong cleaning: Efficiently cleans records with powerful vacuum suction.
Completely dry record within 2 rotations: Designed for rapid drying, allowing immediate playback.
Big 2.5l tank for vacuumed cleaning liquid: Large capacity waste fluid tank for extended use.
Removes static load of vinyl records: Helps eliminate static electricity that attracts dust.
Removes cleaning fluid (Wash it) residue free: Ensures no residue is left on the record surface after cleaning.

Configuració

Desembalatge: Carefully remove the VC-S3 unit and all accessories from its packaging. Retain packaging for future transport or storage.
Col·locació: Place the machine on a stable, level surface away from direct sunlight, heat sources, and excessive dust. Ensure adequate ventilation around the unit.
Connexió d'alimentació: Connect the provided power cable to the VC-S3 and then to a suitable wall outlet. Ensure the power switch is in the "Off" position before connecting.
Fluid Preparation: Prepare your record cleaning fluid according to its manufacturer's instructions. Pro-Ject recommends using their "Wash it" cleaning fluid for optimal results.

A dalt view of Pro-Ject VC-S3 with a record on the platter

Imatge: De dalt a baix view of the Pro-Ject VC-S3, showing a vinyl record placed on the central spindle and the vacuum arm positioned to the right.

Instruccions de funcionament

Follow these steps for effective record cleaning:

Registre del lloc: Carefully place the record onto the spindle, ensuring it sits flat. Secure it with the record clamp.
Apply Fluid: Apply a small amount of cleaning fluid evenly across the record surface. Use a dedicated brush (not included) to gently spread the fluid.
Motor d'arrencada: Flip the "MOTOR" switch to the "I" position to start the platter rotation. Allow the fluid to work for a few rotations.
Engage Vacuum: Flip the "VACUUM" switch to the "I" position to activate the vacuum suction. The vacuum arm will draw the fluid and contaminants from the record surface.
Dry Record: Allow the vacuum to operate for 1-2 rotations (approximately 2 seconds) until the record surface appears dry. For heavily soiled records, a second application and vacuum cycle may be necessary.
Atura l'operació: First, flip the "VACUUM" switch to "O", then the "MOTOR" switch to "O".
Remove Record: Carefully remove the record clamp and then the cleaned record.

Close-up of the motor and vacuum switches on the Pro-Ject VC-S3

Imatge: Primer pla view of the two toggle switches on the side of the Pro-Ject VC-S3, labeled "MOTOR" and "VACUUM", indicating their on/off positions.

Manteniment

Tanc de residus buit: Regularly check and empty the waste fluid tank. The tank is located at the bottom of the unit. Refer to the diagram in the full manual for exact location and removal instructions. Dispose of waste fluid responsibly.
Clean Vacuum Arm: Periodically inspect the felt strips on the vacuum arm for wear or debris. Clean them gently with a damp cloth. Replace worn strips to maintain optimal suction.
Neteja exterior: Clean the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Emmagatzematge: When not in use for extended periods, disconnect the power and store the unit in a dry, dust-free environment.

Resolució de problemes

Problema	Causa possible	Solució
Record not drying completely or wet streaks remain.	Insufficient vacuum time. Worn or dirty vacuum arm felt strips. Waste tank is full. Record warpage preventing full contact.	Increase vacuum time to 2-3 rotations. Clean or replace felt strips. Empty the waste tank. Ensure record is as flat as possible; apply gentle pressure to the vacuum arm if necessary (with caution).
La màquina no s'encén.	El cable d'alimentació no està connectat. No hi ha corrent a la presa de corrent.	Check power cable connection to unit and wall outlet. Prova la presa de corrent amb un altre dispositiu.
Motor or vacuum not engaging.	Switches not fully engaged. Falla interna.	Ensure switches are firmly in the "I" position. Si el problema persisteix, contacteu amb l'atenció al client.

Especificacions

Nom del model: VC-S3
Número de model de l'article: 9120122295748
Marca: Pro-Ject
Color: Plata
Dimensions del producte: 20 x 18 x 18 polzades (Llarg x Amplada x Altura)
Pes de l'article: 19.41 lliures
Font d'alimentació: Elèctric amb cable
Capacitat del dipòsit de residus: 2.5 litres (aprox.)

Garantia i Suport

Specific warranty terms and detailed support contact information are not provided in this document. For warranty claims, technical support, or service inquiries, please refer to the official Pro-Ject Audio Systems website or contact your authorized dealer. Keep your proof of purchase for warranty purposes.

You can visit the official Pro-Ject store on Amazon for more information: Pro-Ject Audio Systems Store

	Instruccions d'ús de la màquina de neteja de discos Pro-Ject VC-S2 ALU Aquest document proporciona instruccions d'ús, configuració, manteniment i resolució de problemes per a la màquina de neteja de discos Pro-Ject VC-S2 ALU. Inclou precaucions de seguretat, descripcions dels components i informació sobre la garantia.
	Manual d'usuari i guia de configuració del tocadiscos Pro-Ject T1, T1 Phono SB, T1 BT Instruccions completes per configurar, fer funcionar i mantenir els tocadiscos Pro-Ject T1, T1 Phono SB i T1 BT. Inclou especificacions tècniques, resolució de problemes i informació sobre la garantia.
	Tocadiscos Pro-Ject A1: Manual d'usuari, configuració i especificacions Instruccions completes per configurar, fer funcionar i mantenir el tocadiscos Pro-Ject A1. Inclou especificacions tècniques, consells per a la resolució de problemes i informació sobre la garantia.
	Tocadiscos Pro-Ject X8 B: Instruccions d'ús, configuració i especificacions Guia completa per al tocadiscos Pro-Ject X8 B, que cobreix la configuració, la instal·lació, el funcionament, el manteniment, les especificacions tècniques, la resolució de problemes i la informació sobre la garantia.
	Manual d'usuari del tocadiscs Pro-Ject A1 Instruccions d'ús i configuració del tocadiscos Pro-Ject A1, incloent-hi especificacions tècniques, manteniment i resolució de problemes.
	Guia de cura del cartutx i llapis òptic Pro-Ject Apreneu a cuidar el cartutx phono Pro-Ject, incloent-hi la neteja del llapis, la neteja dels discos amb Pro-Ject Brush-it i la substitució del llapis. Aquesta guia cobreix les parts essencials d'un cartutx phono i proporciona instruccions per al manteniment.

Pro-Ject VC-S3 (Model 9120122295748)