AdaLov CPE369 Wireless Bridge Kit User Manual

1. Introducció

This user manual provides detailed instructions for the installation, configuration, operation, and maintenance of the AdaLov CPE369 Wireless Bridge Kit. This kit includes three wireless bridges designed for outdoor network expansion, offering high-speed 5.8G wireless connectivity with a 1000Mbps LAN port and a 16dBi antenna for long-range transmission up to 3 kilometers.

The CPE369 kit supports Point-to-Point (PTP) and Point-to-Multipoint (PTMP) connections, making it ideal for extending networks, video surveillance, and internet sharing across various outdoor environments.

2. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• 3 x CPE369 Wireless Bridges
• 3 x POE Adapters
• 3 x Metal Cable Ties
• 3 x cables de xarxa
• 1 x Manual d'usuari

Image: All components included in the CPE369 Wireless Bridge Kit.

3. Producte acabatview

The AdaLov CPE369 Wireless Bridge is an outdoor-rated device designed for robust and long-range wireless network extension. Each unit features a 16dBi high-gain directional antenna and supports 5.8GHz frequency for high-speed, low-latency data transmission.

3.1 Característiques clau

• Transmissió de llarg abast: Up to 3KM (1.9 miles) with 16dBi directional antenna.
• Alta velocitat: 5.8GHz wireless with up to 900Mbps wireless transmission rate and 433Mbps LAN data rate.
• Dual LAN Ports: Includes one 100Mbps and one 1000Mbps LAN port.
• Durabilitat a l'aire lliure: IP65 waterproof and dustproof design, resistant to harsh weather conditions (sunlight, frost, rain, humidity, hail).
• Potència POE: Supports 24V POE power for flexible installation.
• Maridatge fàcil: One-key dialing pairing for Point-to-Point (PTP) and Point-to-Multipoint (PTMP) connections.
• Seguretat: Supports WEP64/128bits, WPA, WPA2, 802.1x.

3.2 Identificació de components

Imatge: Detallada view of the CPE369 unit with labeled components.

• Digital Tube: Displays current mode (Transmitter A Mode, Receiver B Mode) and pairing status.
• Botó de restabliment: Used for resetting the device or setting the same channel during pairing.
• Botó AB: Toggles between Master (A) and Slave (B) modes for pairing.
• LAN (100Mbps) Port: Ethernet port for network connection.
• LAN (1000Mbps) Port: Gigabit Ethernet port for high-speed network connection.
• Potència CC: Entrada d'alimentació per al dispositiu.
• WLAN Signal Light: Indica la força del senyal sense fil.
• Indicador d'alimentació: Mostra l'estat de l'alimentació.

4. Configuració i instal·lació

4.1 Precaucions de seguretat

• Assegureu-vos de posar a terra correctament les instal·lacions exteriors.
• No obriu el dispositiu casing; demaneu el servei tècnic a personal qualificat.
• Use only the provided POE adapters.
• Mount the devices securely to prevent falling.

4.2 Mounting the Devices

The CPE369 units can be installed on a pole or wall-mounted using the provided metal cable ties. Ensure the mounting location provides a clear line of sight between the master and slave bridges for optimal performance.

Imatge: Example of outdoor wall mounting for the CPE369.

4.3 Powering the Devices (POE)

Connect the provided POE adapters to power the CPE369 units. The POE adapter simplifies installation by delivering both power and data over a single Ethernet cable.

4.4 Dialing Pairing (Point-to-Multipoint Configuration)

The CPE369 kit supports easy one-key dialing pairing for Point-to-Multipoint (PTMP) connections. One unit acts as the Master Bridge (Transmitter A Mode), and the other two units act as Slave Bridges (Receiver B Mode).

1. Set Master Bridge: On one CPE369 unit, push the 'A-B' button to the 'A' position. The digital tube will display 'A'.
2. Set Slave Bridges: On the other two CPE369 units, push the 'A-B' button to the 'B' position. The digital tube on these units will display 'B'.
3. Set Same Channel: Press the 'Reset' button on all three bridges simultaneously. This will set them to the same channel for pairing.
4. Vinculació correcta: The devices will automatically pair. The WLAN signal lights will indicate successful connection and signal strength.

Image: Step-by-step guide for dialing pairing the CPE369 units.

Important Considerations for PTMP Setup:

• The slave bridges must be in front of the master bridge.
• The master bridge and slave bridges must be face-to-face.
• L'angle màxim entre el pont mestre i els ponts esclaus no ha de superar els 60 graus.

Image: Guidelines for optimal placement in a Point-to-Multipoint setup.

5. Funcionament i aplicacions

5.1 Network Extension (PTMP)

The CPE369 kit is designed to extend your network wirelessly over long distances. The Master CPE connects to your main network (e.g., router, ALDS), and the Slave CPEs provide network access at remote locations.

Image: Network extension diagram using CPE369 in PTMP mode.

5.2 Video Surveillance Transmission

The high-speed and low-latency capabilities of the CPE369 make it ideal for transmitting video streams from security cameras to a central monitoring system (DVR/NVR).

Image: Video surveillance transmission setup with CPE369.

5.3 Starlink Network Extension

The CPE369 can be used to extend Starlink internet service to areas where the Starlink router cannot reach directly, by placing the master bridge near the Starlink dish and extending the network to remote locations.

Image: Starlink network extension using CPE369.

5.4 General Applications

The CPE369 Wireless Bridge Kit is suitable for a wide range of outdoor applications, including:

• Farm and barn network extension
• Warehouse connectivity
• Building-to-building network links
• Garage network extension
• Connecting CCTV cameras
• Corporate WAN connections
• Internet access for remote locations
• Telecommunication masts

Image: Diverse application scenarios for the CPE369.

6. Manteniment

The AdaLov CPE369 is designed for minimal maintenance due to its robust IP65 outdoor rating. However, periodic checks can ensure optimal performance and longevity.

• Inspecció física: Periodically inspect the units for any physical damage, loose mounts, or cable wear.
• Línia de visió clara: Ensure that there are no new obstructions (e.g., growing trees, new buildings) blocking the line of sight between the bridges.
• Neteja: If necessary, gently wipe the exterior of the units with a damp drap per eliminar la brutícia o les restes. No utilitzeu productes químics agressius ni netejadors abrasius.
• Actualitzacions de firmware: Comproveu el del fabricant website for any available firmware updates to ensure the device operates with the latest features and security enhancements.

Image: The CPE369's IP65 rating ensures durability in various weather conditions.

7. Solució De Problemes

8. Especificacions tècniques

9. Garantia i Suport

For warranty information and technical support, please refer to the official AdaLov weblloc web o contacteu directament amb el seu servei d'atenció al client. El producte normalment inclou una garantia estàndard del fabricant que cobreix els defectes de materials i de fabricació.

Fabricant: AdaLov

Lloc de treball: Room 1702, Unit 2, Building 10, Jingyuan Shengshihuadu, Qingfeng Street Middle Road Zhoukou City Chuanhui District 466000 Henan Province China

Conserveu el vostre comprovant de compra per a reclamacions de garantia.