Veise KS02B and KS01C Keyless Entry Door Lock with Handle User Manual

Introducció

Welcome and thank you for choosing the Veise Keyless Entry Door Lock. This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your new lock. Please read this manual thoroughly before installation and retain it for future reference to ensure proper function and longevity of your product.

Components del producte

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, please contact customer support.

• Keypad Deadbolt (KS02B or KS01C)
• Conjunt de manetes de palanca
• Claus físiques (2)
• Mounting Hardware (screws, strike plate, latch)
• Plantilla d'instal·lació
• Manual d'usuari

This image displays the complete set of components for the Veise Keyless Entry Door Lock, including the keypad deadbolt, a lever handle set, and a traditional knob set. The KS02B model features a fingerprint sensor, while the KS01C is keypad-only. Both are shown in a matte black finish.

Especificacions del producte

• Marca: Veise
• Models: KS02B (with fingerprint), KS01C (keypad only)
• Tipus de bloqueig: Keypad Deadbolt with Handle
• Material: Metall
• Acabat: Negre mat
• Característiques especials: Keyless entry (Fingerprint, Passwords, One-time Codes, Keys), Auto-Lock, Anti-Peeping Codes, Backlit Keypad, Low Battery Alerts, Mute Mode, Vacation Mode
• Certificació de seguretat: Certificació ANSI de grau 3
• Resistència a la intempèrie: IP54 resistent a la intempèrie
• Interval de temperatura: -31 °F a 158 °F (-35 °C a 70 °C)
• Font d'alimentació: 4 AA batteries (estimated 1+ year battery life)
• Compatibilitat de la porta: American standard left and right-handed doors, door thickness 1-3/8" to 2" (35mm-50mm), hole diameter 2-1/8" (54mm), backset 2-3/8" or 2-3/4" (60mm or 70mm)
• Fingerprint Recognition (KS02B): 0.3 seconds identification, 99.99% recognition rate, 500 DPI resolution
• Codis d'usuari: Fins a 20 codis d'usuari

Guia d'instal·lació

Eines necessàries: Tornavís de cap Phillips.

Abans de començar:

• Ensure your door dimensions match the lock's compatibility requirements. Refer to the "Check The Door Size Before Purchase" image below.
• Do not install batteries until the lock is fully installed and tested.

This diagram illustrates how to measure your door to ensure compatibility with the Veise Keyless Entry Door Lock. It specifies the required hole diameter (2-1/8 inches or 54mm), backset (2-3/8 inches or 60mm, or 2-3/4 inches or 70mm), and door thickness (1-3/8 inches to 2 inches or 35mm-50mm). It also shows compatibility with both left-handed and right-handed doors and clarifies that the lock is for single cylinder deadbolts, not mortise or integrated systems.

Passos d'instal·lació:

1. Prepara la porta: If replacing an existing lock, remove it. Use the provided template to mark and drill holes if installing on a new door.
2. Instal·leu el tancament: Introduïu el pestell a la vora de la porta, assegurant-vos que la fletxa "AMUNT" estigui mirant cap amunt. Fixeu-lo amb cargols.
3. Instal·leu el conjunt exterior: Route the cable through the door hole and position the exterior keypad assembly.
4. Instal·leu la placa de muntatge interior: Secure the interior mounting plate to the exterior assembly using screws.
5. Connecteu el cable: Connecteu el cable del conjunt exterior al conjunt interior.
6. Instal·leu el conjunt interior: Attach the interior assembly to the mounting plate, ensuring the thumb turn operates smoothly. Secure with screws.
7. Instal·leu la placa de tancament: Instal·leu la placa de cop al marc de la porta.
8. Instal·leu les bateries: Introduïu 4 piles AA al conjunt interior.
9. Prova de funcionament: Test the lock with the physical key and the default code (if any) before closing the door.

This image shows the Veise KS02B keyless entry door lock and its accompanying lever handle fully installed on a white door. The matte black finish of the lock and handle contrasts with the door, highlighting the sleek design and integrated appearance.

A hand is shown using a Phillips head screwdriver to secure the interior assembly of the Veise keyless door lock to the door. This illustrates the ease of installation, requiring only a basic tool.

Configuració i Programació

Configuració inicial:

• After battery installation, the lock will perform a self-check.
• The default master code is typically provided in a separate quick start guide or on a sticker inside the battery cover. It is highly recommended to change this immediately for security.

Canvi del codi mestre

Consult the quick start guide for detailed, model-specific steps on changing the default master code. This is a critical security step.

Addició de codis d'usuari

The lock supports up to 20 unique user codes. To add a new user code, typically you will: Enter Master Code, press '#', select the option for adding a user code, enter the new 4-8 digit code, then press '#'. Refer to your quick start guide for exact button sequences.

Adding Fingerprints (KS02B Model Only)

To add a fingerprint: Enter Master Code, press '#', select the option for adding a fingerprint, then place your finger on the sensor multiple times from different angles until it is successfully registered. Refer to your quick start guide for exact button sequences.

This image highlights the versatile unlocking options for the Veise keyless door lock. It shows that users can unlock the door using up to 20 programmable user codes, a temporary one-time code, or the two included physical spare keys. This provides multiple layers of access control.

Funcionament del teu pany

Obrint la Porta

Ús d'un codi d'usuari:

1. Premeu qualsevol tecla per activar el teclat numèric.
2. Introduïu el vostre codi d'usuari de 4 a 8 dígits.
3. Press the "#" key. The lock will unlock.

Using Fingerprint (KS02B Only):

1. Col·loca el dit registrat al sensor d'empremtes dactilars.
2. The lock will identify your fingerprint within 0.3 seconds and unlock.

Using Physical Key:

1. Introduïu la clau física al forat del pany.
2. Turn the key to unlock the deadbolt.

Tancant la porta

Bloqueig manual:

• From the inside, turn the thumb turn to the locked position.
• From the outside, press the "#" key on the keypad.

Funció de bloqueig automàtic:

The lock can be programmed to automatically lock after a set period (typically 10-99 seconds) after being unlocked. Refer to programming instructions in your quick start guide to enable/disable and adjust this setting.

This image depicts a woman entering her home, with a close-up inset showing the Veise keyless door lock's auto-lock mechanism. The text indicates that the lock can automatically engage after a user-defined period of 10-99 seconds, enhancing security by ensuring the door is always locked after entry or exit.

Anti-Peeping Passcode

To prevent others from guessing your code, you can enter random digits before or after your actual passcode. This makes it harder for onlookers to discern your true code.

ExampLI: [Random Digits] + [Your Code] + [Random Digits]

This image visually explains the anti-peeping passcode feature. It shows a keypad lock and a sequence of numbers: random digits, followed by the actual password (highlighted), and then more random digits. This method helps obscure the real password from onlookers.

Mode de silenci

This mode silences the keypad beeps for quiet operation. Refer to your quick start guide for programming instructions to enable or disable this feature.

Mode de vacances

This mode disables all user codes and fingerprints, allowing access only via the master code or physical key. It is ideal for extended absences to enhance security. Refer to your quick start guide for programming instructions to enable or disable this feature.

Manteniment

Canvi de bateria

The lock is powered by 4 AA batteries. When the battery level is low, the lock will provide an audible and/or visual alert. Replace batteries promptly to avoid loss of function.

1. Traieu la coberta de la bateria del conjunt interior.
2. Traieu les piles velles.
3. Introduïu 4 piles alcalines AA noves, assegurant-vos de la polaritat correcta (+/-).
4. Substituïu la tapa de la bateria.

Nota: Do not mix old and new batteries, or different types of batteries, as this can damage the lock or reduce battery life.

Neteja

Netegeu l'exterior del pany amb un drap suau iamp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as they may damage the finish or electronic components.

For the fingerprint sensor (KS02B), gently wipe with a clean, dry, lint-free cloth to ensure optimal performance.

Resolució de problemes

Garantia i assistència al client

For warranty information or technical assistance, please refer to the warranty card included with your product or contact Veise customer support directly.

Please have your model number (KS02B or KS01C) and purchase date ready when contacting support for faster service.