Manual d'instruccions del quadricòpter Carson X4 210 LED

1. Introducció

The Carson X4 Quadcopter 210 LED is a versatile and agile remote-controlled drone designed for both beginners and experienced pilots. This model features an activatable headless function and three distinct speed levels, ensuring an enjoyable flight experience for all skill levels. Its automatic altitude control and intelligent 6-axis gyroscope provide stable flight. The X4 Quadcopter 210 also includes an acrobatic mode for performing impressive maneuvers and a convenient "Coming-Home" function to return the drone to its starting point with a single button press. Equipped with additional LED lights on the rotor arms, this quadcopter is suitable for flying even in low-light conditions or at dusk. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting of your Carson X4 Quadcopter 210 LED.

2. Informació de seguretat

Attention: Colors and technical modifications are subject to change. Not suitable for children under 8 years of age. Use only under the supervision of an adult who has read the attached instructions. Read the operating instructions together with the child before use. Use only in domestic environments (home and garden).

Mandatory insurance (prescribed by law): The operation of a remote-controlled aircraft involves certain dangers, often covered by your classic private liability insurance. Please check your insurance documents. Otherwise, it is absolutely necessary to take out adequate supplementary insurance. Adequate insurance is already available for a very low contribution.

3. Contingut del paquet

En obrir el paquet, comproveu que tots els components que s'enumeren a continuació hi són presents i en bon estat:

• Carson X4 Quadcopter 210 LED Drone
• Transmissor de control remot
• Rechargeable Flight Battery for Drone
• Cable de càrrega USB
• Hèlixs de recanvi (2 peces)
• Petit tornavís
• AAA Batteries (3 pieces) for Remote Control
• Manual d'instruccions (aquest document)

Figure 3.1: Complete package contents of the Carson X4 Quadcopter 210 LED.

4. Configuració

4.1. Charging the Flight Battery

1. Connect the drone's flight battery to the provided USB charging cable.
2. Connecteu el cable de càrrega USB a una font d'alimentació USB estàndard (per exemple, un port USB de l'ordinador o un adaptador de paret USB).
3. The charging indicator on the USB cable will show the charging status (refer to the cable's specific indicator behavior, usually red for charging, off/green for charged).
4. Allow approximately 60-90 minutes for a full charge. Do not overcharge the battery.
5. Once fully charged, disconnect the battery from the charging cable.

4.2. Instal·lació de les piles al comandament a distància

1. Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
2. Obriu la tapa del compartiment de la bateria.
3. Introduïu tres (3) piles AAA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
4. Tanqueu bé la tapa del compartiment de la bateria.

4.3. Installing the Flight Battery in the Drone

1. Locate the battery compartment on the underside of the drone.
2. Carefully insert the fully charged flight battery into the compartment.
3. Connect the battery connector to the drone's power port. Ensure a secure connection.
4. Tanqueu la tapa del compartiment de la bateria.

4.4. Propeller Installation (if necessary)

The drone comes with pre-installed propellers. If replacement is needed, use the provided screwdriver to remove the old propellers and install new ones, ensuring they are correctly oriented (A and B type propellers for corresponding motor arms).

5. Instruccions de funcionament

5.1. Preparació del primer vol

1. Col·loqueu el drone sobre una superfície plana i plana.
2. Turn on the drone's power switch. The LED lights on the drone will flash.
3. Turn on the remote control. The remote control's indicator light will flash.
4. To pair the drone and remote, push the left joystick (throttle) all the way up, then all the way down. The drone's lights will become solid, indicating successful pairing.
5. Perform a gyroscope calibration by placing the drone on a level surface and moving both joysticks to the bottom-right corner simultaneously until the lights flash and then become solid.

5.2. Basic Controls and Features

• Enlairament/Aterratge: After pairing, press the one-key take-off button (if available) or slowly push the left joystick up to take off. To land, slowly pull the left joystick down.
• Automatic Altitude Control: El dron manté la seva altitud automàticament, cosa que facilita el seu control.
• Giroscopi de 6 eixos: Ensures stable flight and easy maneuverability.
• Mode sense cap: Activate this function to make the drone's orientation relative to the pilot, regardless of its actual front. This simplifies control for beginners. Press the headless mode button to activate/deactivate.
• Nivells de velocitat: The drone offers three different speed levels (low, medium, high) to suit various skill levels and flying conditions. Press the speed switch button to cycle through the speeds.
• Acrobatic Mode: Perform 360-degree flips and rolls. While flying, press the acrobatic mode button, then push the right joystick in the desired direction to execute a flip.
• Coming-Home Function: With a press of the "Coming-Home" button, the drone will automatically fly back towards its take-off point. Ensure sufficient space for this maneuver.
• Il·luminació LED: The drone is equipped with bright LED lights on its rotor arms, allowing for visibility and exciting flights during dusk or in low-light environments.

Figure 5.1: The Carson X4 Quadcopter 210 LED in flight.

Figure 5.2: The drone's LED lights in action, suitable for night flying.

5.3. Flight Tips

• Voleu sempre en zones obertes lliures d'obstacles, persones i animals.
• Avoid flying in strong winds, rain, or extreme temperatures.
• Mantingueu el dron dins de la vostra línia de visió en tot moment.
• Practice basic controls in a low-speed mode before attempting advanced maneuvers.
• Monitor battery levels and land the drone before the battery is completely depleted to avoid sudden drops.

6. Manteniment

6.1. Neteja

Regularly clean the drone and remote control with a soft, dry cloth. Do not use water or chemical cleaners, as they can damage electronic components. Remove any debris from the propellers and motors.

6.2. Inspecció i substitució de l'hèlix

Inspect propellers for any damage (cracks, bends, chips) before each flight. Damaged propellers can affect flight stability and safety. Replace any damaged propellers immediately using the provided spare parts and screwdriver.

6.3. Cura i emmagatzematge de la bateria

• Always allow the battery to cool down before recharging.
• Guardeu les piles en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Si l'emmagatzemeu durant períodes prolongats, carregueu la bateria fins a aproximadament un 50% de la seva capacitat.
• Do not puncture, short-circuit, or expose batteries to fire.

7. Solució De Problemes

8. Especificacions

9. Assistència i garantia

Carson is committed to providing high-quality products and excellent customer satisfaction. As a specialist in remote-controlled helicopters and drones, Carson ensures exceptional quality and maximum product safety.

For any questions, technical assistance, or support regarding your Carson X4 Quadcopter 210 LED, please refer to the official Carson website or contact their customer service. Details for contacting support are typically found on the product packaging or the official brand weblloc.

While specific warranty details are not provided in this manual, Carson products generally come with a manufacturer's warranty covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

You can visit the Carson store on Amazon for more information and products: Carson Amazon Store.