Introducció
The VIJIM LS23 Broadcast Boom Arm is a professional-grade desk mount stand designed for content creators, streamers, and broadcasters. It features multiple flexible arms, a laptop tray, and various expansion interfaces, allowing for simultaneous connection of cameras, microphones, and lighting equipment. This manual provides comprehensive instructions for assembly, operation, and maintenance of your LS23 boom arm.
Image: The VIJIM LS23 Broadcast Boom Arm in a typical setup, showcasing its ability to hold a laptop, camera, and lighting simultaneously for a comprehensive live broadcast station.
Informació de seguretat
- Assegureu-vos que l'escriptori clamp is securely fastened to a stable surface before attaching any equipment.
- No supereu la capacitat de càrrega màxima de 2kg (4.4 lliures) per arm. The main pole can support up to 10kg (22 lliures).
- Distribute weight evenly across the arms to maintain stability.
- Keep hands clear of moving parts during adjustment to prevent pinching.
- Avoid placing the stand in high-traffic areas where it could be accidentally knocked over.
Contingut del paquet
Please verify that all components listed below are present in your package.
Image: A visual representation of all components included in the VIJIM LS23 package, such as the desk clamp, extension arms, microphone holder, laptop bracket, and various adapters.
- Escriptori C-Clamp Mount * 1
- Extension Arm A * 2
- Extension Arm B * 1
- Microphone Holder * 1
- Laptop Bracket * 1
- Laptop Bracket Adapter * 1
- Ballhead * 2
- 1/4" to 3/8" Adapter * 1
- 1/4" to 5/8" Adapter * 1
- Hex Key (for assembly)
Muntatge i muntatge
- Enganxeu el C-Clamp Base: Assegureu-vos el C-clamp mount to the edge of your desk. Ensure the desk thickness is within the 0-90mm clamping range. Tighten the screw until the clamp is firmly in place, protecting the desk surface with the silicone pads.
- Insert the Main Pole: Slide the main pole into the C-clamp base and tighten the securing knob.
- Attach Extension Arms: Loosen the knobs on the main pole and slide the extension arms into the desired positions. Each arm features a damping knob for fixed-point hovering. Tighten the knobs to secure the arms.
- Install Device Mounts:
- For cameras/lights: Attach the ballheads to the ends of the extension arms. Use the 1/4" screw to mount your camera or light.
- For microphones: Attach the microphone holder to an arm. Use the appropriate 1/4" to 3/8" or 1/4" to 5/8" adapter if needed.
- For laptops/tablets: Assemble the laptop bracket with its adapter and attach it to an extension arm.
Imatge: Detallada view of the C-Clamp Base being attached to a desk, highlighting the anti-slip silicone and the maximum clampample d'ingrés.
Image: Close-up of the two-section extension arm, showing the damping knob for precise positioning and the pole clamp mecanisme.
Image: The VIJIM LS23 boom arm fully assembled with a laptop, camera, and microphone attached, demonstrating its multi-device capability.
Instruccions de funcionament
Ajust d'angle
The VIJIM LS23 offers extensive flexibility for positioning your equipment.
- Arm Rotation: Each extension arm can rotate 360° around the main pole. Loosen the knob on the main pole, adjust the arm, and re-tighten.
- Arm Segment Adjustment: The two-section design of the arms allows for further articulation. Loosen the internal damping knob to adjust the angle and length of each arm segment, then tighten to secure.
- Ballhead Adjustment: The included ballheads provide 360° rotation and tilt for precise camera or light positioning. Loosen the ballhead knob, adjust the device, and tighten firmly.
- Laptop Tray Adjustment: The laptop tray supports 300° rotation and can be adjusted for optimal viewangles d'ajust.
Image: Demonstrates the flexible angle adjustment capabilities, including horizontal and vertical camera positioning using the swivel ball head.
Image: Illustrates the various expansion interfaces available, including the universal ballhead, cold shoe, and 1/4", 3/8", and 5/8" interfaces for different accessories.
Manteniment
- Neteja: Wipe the boom arm with a soft, dry cloth to remove dust and fingerprints. Avoid abrasive cleaners or solvents.
- Inspeccions: Periodically check all screws and knobs to ensure they are tight. Re-tighten if necessary to maintain stability.
- Emmagatzematge: When not in use, the boom arm can be collapsed for compact storage. Ensure all attached devices are removed before collapsing.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El suport està inestable o trontolla. | C-clamp not tightened sufficiently; weight unevenly distributed; desk surface too thin or unstable. | Ensure C-clamp is fully tightened. Redistribute equipment weight. Use on a sturdy desk within the specified clamprang d'ing. |
| Arm sags or does not hold position. | Damping knob not tightened; equipment exceeds arm's load capacity. | Premeu el damping knob on the arm. Reduce the weight of the attached equipment (max 2kg per arm). |
| Cannot attach device to arm. | Incorrect adapter used; screw thread mismatch. | Ensure you are using the correct 1/4", 3/8", or 5/8" adapter for your device. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | VIJIM |
| Model | LS23 |
| Material | Aliatge d'alumini |
| Tipus d'acabat | Recobert de pols |
| Tipus de muntatge | Tabletop Mount (C-Clamp) |
| Escriptori Clamping Range | 0-90 mm |
| Main Pole Height | 78 cm (aproximadament 30.7 polzades) |
| Longitud del braç d'extensió | 53 cm (aproximadament 20.9 polzades) |
| Single Arm Load Capacity | Fins a 2 kg (4.4 lliures) |
| Main Pole Load Capacity | Fins a 10 kg (22 lliures) |
| Laptop Tray Size | 26cm x 22.5cm (approx. 10.2 x 8.9 inches) |
| Dimensions del producte (L x A x A) | 17.13 x 12.99 x 3.74 polzades (envasat) |
| Pes de l'article | 3.31 lliures (1500 grams) |
Image: Diagram showing key dimensions and load capacities of the VIJIM LS23 Broadcast Boom Arm components.
Garantia i Suport
For warranty information, technical support, or any inquiries regarding your VIJIM LS23 Broadcast Boom Arm, please contact VIJIM customer service through their official weblloc web o el distribuïdor on es va comprar el producte. Conserveu el rebut de compra com a comprovant de compra.
You can visit the official VIJIM store on Amazon for more information: VIJIM Amazon Store
