Introducció
Thank you for choosing the Nuvance Professional Hair Clipper. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new hair clipper. Please read these instructions thoroughly before first use and keep them for future reference.
Instruccions importants de seguretat
Per reduir el risc de descàrrega elèctrica, lesions o incendi, seguiu sempre aquestes precaucions de seguretat bàsiques:
- No submergiu l'aparell en aigua o altres líquids.
- Keep the appliance away from water sources, especially when charging.
- Do not use the clipper if it has a damaged cord or plug, or if it is not working properly.
- Aquest aparell no està pensat per a persones amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, llevat que hagin rebut supervisió o instruccions sobre l'ús de l'aparell per part d'una persona responsable de la seva seguretat.
- Els nens han de ser supervisats per assegurar-se que no juguin amb l'aparell.
- Només feu servir els accessoris subministrats pel fabricant.
- Unplug the clipper before cleaning or performing maintenance.
- Store the clipper in a dry place when not in use.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Nuvance Professional Hair Clipper
- 12 Guide Combs (various lengths)
- Cable de càrrega USB
- Raspall de neteja
- Oli de fulla
- Manual d'usuari
Producte acabatview
Familiarize yourself with the components of your Nuvance Hair Clipper.
Figura 1: Nuvance Hair Clipper components. This image shows the clipper from the side, highlighting the stainless steel blade, the blade adjustment lever, the power on/off switch, the battery indicator screen, and the USB charging port. The overall height of the clipper is indicated as 18.5 cm.
- Fulla d'acer inoxidable: High-quality cutting blades for precise trimming.
- Blade Adjustment Lever: Allows fine-tuning of cutting length from 0.8mm to 2.0mm without a guide comb.
- Interruptor d'encesa/apagada: Activates and deactivates the clipper.
- Pantalla digital: Mostra el nivell de la bateria i l'estat de càrrega.
- Port de càrrega USB: Per connectar el cable de càrrega USB.
- Guide Comb Attachments: Various sizes for different hair lengths.
Configuració
Carregant el Clipper
Before first use, fully charge the clipper. A full charge typically takes approximately 3 hours and provides extended cordless operation.
- Assegureu-vos que la talladora de cabells estigui apagada.
- Insert the USB charging cable into the charging port at the bottom of the clipper.
- Connect the other end of the USB cable to a USB power adapter (not included) or a compatible USB port (e.g., computer, power bank).
- The digital display will show the charging progress. Once fully charged, the display will indicate 100%.
Figura 2: USB charging and digital display. The image illustrates the clipper being charged via a USB cable, with the digital screen showing the battery percentage. It also highlights the power switch for quick operation.
Col·locació de pintes guia
The clipper comes with 12 guide combs to achieve various hair lengths from 0.8mm to 25mm.
Figura 3: Guide comb lengths. This image displays different guide comb attachments, indicating their respective trimming lengths: 1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm, 19mm, and 25mm. It also mentions 4 reserve attachments for 1, 2, 3, and 4.
- Seleccioneu la pinta guia desitjada per a la longitud de cabell que preferiu.
- Alineeu la pinta guia amb la fulla de la tallacabells i premeu-la fermament fins que encaixi al seu lloc.
- Per treure-la, estireu suaument la pinta de la fulla.
Instruccions de funcionament
Funcionament bàsic
- Ensure the clipper is charged and a guide comb is securely attached (if desired).
- Press the Power On/Off switch to turn on the clipper.
- Hold the clipper with the blade pointing downwards.
- Moveu la talladora de cabells lentament en la direcció contrària al creixement del pèl.
- After use, press the Power On/Off switch to turn off the clipper.
Adjusting Cutting Length (without guide comb)
The blade adjustment lever allows for precise cutting length adjustments from 0.8mm to 2.0mm without a guide comb.
Figura 4: Blade adjustment lever. This image focuses on the side of the clipper, illustrating the lever that allows for fine adjustment of the blade's cutting length in 1mm increments, offering 4 different settings.
- Move the lever up for a shorter cut (closer to 0.8mm).
- Move the lever down for a longer cut (closer to 2.0mm).
Trimming Hair and Beard
This clipper is suitable for various grooming needs, including head hair, beard, and body hair.
Figura 5: Multi-functional use. This image highlights the clipper's ability to trim hair on various body parts, including head hair, beard, chest, and stomach, indicating its versatile application.
- For head hair: Start with a longer guide comb and gradually reduce the length until the desired style is achieved.
- For beard trimming: Use a guide comb to maintain an even length. For detailing, remove the guide comb and use the blade adjustment lever.
- For body hair: Use appropriate guide combs for sensitive areas.
Manteniment
Neteja de les fulles
Una neteja regular garanteix un rendiment òptim i allarga la vida útil de la teva talladora de cabells.
- Apagueu i desconnecteu la talladora de llavis.
- Traieu qualsevol pinta guia que tingueu connectada.
- Feu servir el raspall de neteja inclòs per treure els pèls solts de les fulles.
- For a more thorough clean, the blades can be carefully detached (refer to specific instructions if provided in the physical manual for blade removal). Rinse detached blades under running water and ensure they are completely dry before reattaching. Do not rinse the clipper body.
Engraint les Blades
Apply a few drops of the supplied blade oil to the blades after every few uses to maintain sharpness and smooth operation.
- Apply 1-2 drops of oil to the top of the blades.
- Engegueu la talladora de cabells durant uns segons per distribuir l'oli uniformement.
- Netegeu l'excés d'oli amb un drap suau.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La talladora no s'encén. | La bateria està esgotada. | Carregueu la talladora completament. |
| La talladora arrenca els cabells o talla malament. | Les fulles estan desafilades, brutes o no estan greixades. | Netegeu i olieu les fulles. Si el problema persisteix, és possible que calgui substituir-les. |
| La maquineta fa un soroll estrany. | Les fulles no estan correctament alineades o lubricades. | Ensure blades are clean and oiled. Check for proper blade attachment. |
| La pantalla digital no funciona. | La unitat està apagada o la bateria està completament morta. | Turn on the clipper or connect to charger. |
Especificacions
- Model: HF-8933
- Marca: Nuvance
- Font d'alimentació: USB recarregable
- Material de la fulla: Acer inoxidable
- Longituds de tall: 0.8mm - 25mm (with 12 guide combs)
- Indicador de bateria: Pantalla digital
Garantia i Suport
Nuvance products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Nuvance weblloc.
Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.
