ADATA Fusion 1600W Titanium Power Supply Unit User Manual

1. Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your ADATA Fusion 1600W Titanium Power Supply Unit (PSU). Designed for high-performance computing systems, this 80 Plus Titanium certified PSU features ATX 3.0 and PCIe 5.0 compatibility, ensuring stable and efficient power delivery. Please read this manual thoroughly before proceeding with installation or use.

2. Informació de seguretat

• Risc elèctric: Power supplies contain high voltage components. Do not open the PSU casing. El manteniment només l'ha de dur a terme personal qualificat.
• Desconnexió d'alimentació: Always disconnect the AC power cord from the wall outlet before installing, removing, or cleaning the PSU or any other computer components.
• Connexió a terra adequada: Ensure your computer system and the wall outlet are properly grounded to prevent electrical shock.
• Ventilació: Do not block the ventilation openings of the PSU. Ensure adequate airflow within your computer case to prevent overheating.
• Humitat: Mantingueu la font d'alimentació allunyada de l'aigua, la humitat i altres líquids.
• Temperatura: Operate the PSU within the specified temperature range. Avoid extreme heat or cold.
• Gestió de cables: Route cables carefully to avoid pinching or damage, which can lead to short circuits or fire hazards.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• ADATA Fusion 1600W Titanium Power Supply Unit
• Modular Cable Set (including Motherboard, CPU, PCIe/GPU, SATA, and Molex cables)
• Cable d'alimentació CA
• Cargols de muntatge
• Manual d'usuari (aquest document)

4. Configuració

4.1. Instal·lació física

1. Assegureu-vos que l'ordinador estigui apagat i que el cable d'alimentació de CA estigui desconnectat de la presa de corrent.
2. Obriu la caixa de l'ordinador.
3. Locate the PSU mounting area, typically at the bottom or top rear of the case.
4. Carefully slide the ADATA Fusion PSU into the designated slot.
5. Fixeu la font d'alimentació a la carcassa amb els cargols de muntatge proporcionats.

4.2. Connexions de cable

The ADATA Fusion 1600W PSU is fully modular, allowing you to connect only the cables required for your system. Refer to the image below for port identification.

This image displays the ADATA Fusion 1600W Titanium Power Supply Unit from an angled top-down perspective. The modular cable connection panel is visible on the left side, labeled for SATA & Molex, Prime Port - Motherboard, CPU & VGA, and 12VHPWR. The top features a fan grill with a geometric pattern, revealing the cooling fan beneath. The side of the unit shows the 'FUSION' branding.

1. Alimentació de la placa base: Connecteu el cable ATX de 24 pins de la font d'alimentació al port corresponent de la placa base.
2. Potència de la CPU: Connect the 4+4-pin or 8-pin EPS/CPU cable(s) from the PSU to the CPU power connector(s) on your motherboard.
3. PCIe/GPU Power: Connect the appropriate 6+2-pin or 12VHPWR PCIe 5.0 cables from the PSU to your graphics card(s). Ensure all required power connectors on your GPU are utilized.
4. SATA/Molex Power: Connect SATA power cables to your storage drives (HDDs, SSDs) and optical drives. Use Molex cables for other peripherals as needed.
5. Connexions perifèriques: Connect any other necessary cables for case fans, RGB controllers, or other components.
6. Alimentació CA: Once all internal connections are made, connect the AC power cord to the PSU and then to a grounded wall outlet.

5. Funcionament

After completing the installation and cable connections:

1. Assegureu-vos que l'interruptor d'alimentació de la part posterior de la font d'alimentació estigui en la posició "ON".
2. Power on your computer system.
3. The ADATA Fusion PSU is designed for efficient and stable operation. Its 80 Plus Titanium certification indicates high power efficiency, reducing heat generation and energy consumption.
4. This PSU supports Prime Ecosystem Management Software. Refer to the ADATA website for software download and instructions on monitoring and controlling PSU performance, fan speeds, and other features.

6. Manteniment

• Neteja: Periodically clean the exterior of the PSU and the fan grill to prevent dust buildup. Use compressed air to gently remove dust from the fan and internal components (ensure the PSU is powered off and unplugged).
• Inspecció del cable: Comproveu regularment totes les connexions dels cables per assegurar-vos que estiguin segures i lliures de danys.
• Condicions ambientals: Maintain a clean, dry, and well-ventilated environment for your computer system to optimize PSU lifespan and performance.

7. Solució De Problemes

If you encounter issues with your ADATA Fusion PSU, consider the following common troubleshooting steps:

• Sense energia:
  • Assegureu-vos que el cable d'alimentació de CA estigui connectat correctament tant a la font d'alimentació com a la presa de corrent.
  • Verify the PSU power switch is in the 'ON' position.
  • Check the wall outlet with another device to confirm it has power.
  • Ensure all modular cables are firmly seated in both the PSU and the respective components.
• Inestabilitat/Avaries del sistema:
  • Confirm that your PSU wattage is sufficient for all installed components.
  • Comproveu si hi ha connexions de cable soltes.
  • Monitoritzar la temperatura del sistema per assegurar-se que els components no s'escalfin massa.
• Soroll del ventilador:
  • Ensure the PSU fan is not obstructed by cables or dust.
  • If using Prime Ecosystem Management Software, check fan speed settings.

If problems persist after attempting these steps, contact ADATA customer support for further assistance.

8. Especificacions

9. Garantia i Suport

ADATA provides a limited warranty for the Fusion 1600W Titanium Power Supply Unit. For detailed warranty terms, conditions, and registration information, please visit the official ADATA weblloc web o consulteu la targeta de garantia inclosa amb el producte.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ADATA customer service through their official weblloc web o la informació de contacte que es proporciona a l'embalatge del producte.

ADATA Official Weblloc: www.adata.com