Introducció
Welcome to the instruction manual for your new BlackZon Smyter 1/12 4WD Electric Desert Buggy. This Ready-to-Run (RTR) vehicle is designed for off-road excitement, featuring a robust 4WD shaft drivetrain, independent double wishbone suspension, and adjustable coilover shocks. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your desert buggy. Please read this manual thoroughly before operating the vehicle.
Informació de seguretat
- Always operate the vehicle in open areas away from people, pets, and obstacles.
- Do not operate near public roads, water, or in adverse weather conditions.
- Mantingueu els dits, els cabells i la roba solta lluny de les peces mòbils.
- Assegureu-vos que la bateria estigui completament carregada abans de cada ús.
- Disconnect the battery from the vehicle when not in use and during storage.
- Use only the provided charger and battery. Improper charging can lead to fire or injury.
- Es recomana la supervisió d'un adult per a usuaris menors de 14 anys.
- Aquest producte conté productes químics coneguts per l'estat de Califòrnia per causar càncer i defectes de naixement o altres danys reproductius.
Contingut del paquet
Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:
- BlackZon Smyter 1/12 4WD Electric Desert Buggy
- 2.4GHz Remote Control Transmitter
- Li-Ion 7.4V 1500mAh Battery w/ T-Plug connector
- Carregador USB
- Optional LED Light Set
- Manual d'instruccions (aquest document)

Image: The BlackZon Smyter 1/12 4WD Electric Desert Buggy, ready for operation.
Configuració
1. Càrrega de la bateria del vehicle
Before first use, fully charge the included Li-Ion 7.4V 1500mAh battery.
- Connect the USB charger to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- Connect the Li-Ion battery to the USB charger's T-Plug connector.
- The charger's indicator light will show charging status (refer to charger's specific light indications).
- Once charging is complete, disconnect the battery from the charger. Do not overcharge.
2. Installing the Vehicle Battery
Carefully install the charged battery into the vehicle's battery compartment.
- Localitzeu el compartiment de la bateria al xassís del vehicle.
- Securely place the charged Li-Ion battery into the compartment.
- Connect the battery's T-Plug connector to the vehicle's corresponding connector.
- Ensure all wires are tucked away and do not interfere with moving parts.
- Tanqueu bé la tapa del compartiment de la bateria.

Imatge: Part inferior view of the Smyter chassis, showing the internal components and battery placement area.
3. Instal·lació de les bateries del comandament a distància
The 2.4GHz remote control transmitter requires batteries (not specified in JSON, assuming standard AA or AAA).
- Obriu el compartiment de la bateria a la part posterior del comandament a distància.
- Insert the required batteries, observing correct polarity (+/-).
- Tanqueu la tapa del compartiment de la bateria.

Imatge: Frontal view of the 2.4GHz remote control transmitter for the Smyter buggy.

Imatge: Superior view of the remote control, showing the steering wheel and various controls.
4. Binding the Remote Control
The remote control and vehicle are typically pre-bound from the factory. If re-binding is necessary:
- Ensure both the vehicle battery and remote control batteries are installed and charged.
- Turn on the remote control transmitter first.
- Then, turn on the vehicle's power switch.
- The indicator lights on both the transmitter and vehicle receiver should become solid, indicating a successful bind. If not, refer to the troubleshooting section or specific binding instructions on the remote control itself (often a small button).
Funcionament del Vehicle
Controls bàsics
- Volant: Rotate the wheel left or right to steer the vehicle.
- Activador de l'accelerador:
- Pull the trigger towards you to accelerate forward.
- Push the trigger away from you to brake, and push again for reverse.
- Interruptor de velocitat: The 2.4GHz transmitter includes a Speed Switch dial. Turn this dial to adjust the maximum speed of the vehicle. This is useful for new users or for operating in confined spaces.
- Ajustos de retall: The remote control may have trim dials for steering and throttle. Use these to fine-tune the vehicle's straight-line tracking and neutral throttle position if needed.
Consells de conducció
- Comença lentament per familiaritzar-te amb els controls.
- Practiqueu la direcció i el control de l'accelerador en una zona oberta.
- Avoid prolonged full-throttle operation, especially on rough terrain, to prevent overheating.
- The Smyter is designed for off-road use. Enjoy its capabilities on dirt, gravel, and grass.
- Utilize the illuminated roof light bar for low-light conditions, and consider installing the bonus optional LED light set for enhanced visibility.
Manteniment
Regular maintenance will extend the life and performance of your BlackZon Smyter.
Neteja
- After each use, especially in dirty or dusty conditions, clean the vehicle.
- Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and wheels.
- Netegeu el cos amb anunciamp tela. Eviteu utilitzar productes químics aggressivs.
- While the electronics are splashproof, avoid submerging the vehicle in water.
Emmagatzematge
- Always disconnect the battery from the vehicle before storage.
- Guardeu el vehicle i el comandament a distància en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Remove batteries from the remote control if storing for extended periods.
Comprovacions de components
- Engranatges: Periodically inspect the spur gear and pinion gear for wear or debris. The gear cover helps keep debris away.
- Suspensió: Check the adjustable coilover shocks and independent double wishbone suspension for any damage or excessive play.
- Diferencials: The 4-Gear differentials (front & rear) are robust, but occasional inspection for smooth operation is recommended.
- Rodaments: The vehicle features a complete set of ball bearings. Ensure they spin freely and are not seized by dirt.
- Direcció: Verify the dual point bell crank steering system and servo saver are functioning correctly.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El vehicle no respon al comandament a distància. |
|
|
| Vehicle runs slowly or inconsistently. |
|
|
| Steering is off-center or unresponsive. |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Número de model | BZN540114 |
| Escala | 1/12 |
| Sistema d'accionament | Transmissió per eix 4WD |
| Tipus de motor | Brushed Electric 390 Motor |
| Bateria | Li-Ion 7.4V 1500mAh w/ T-Plug connector |
| Suspensió | Independent Double Wishbone, Adjustable Coilover Shocks |
| Diferencials | 4-Gear Differentials Front & Rear |
| Electrònica | Resistent a esquitxades |
| Sistema de direcció | Dual Point Bell Crank with Servo Saver |
| Coixinets | Complete Set of Ball Bearings |
| Dimensions del producte | 145.67 x 98.43 x 0.39 polzades |
| Pes de l'article | 3.17 lliures |
| Edat recomanada | 14 months and up (Note: RC vehicles typically have higher age recommendations for operation, this might be a general product age rating) |
Garantia i Suport
For warranty information, technical support, or replacement parts, please contact BlackZon customer service. Refer to the product packaging or the official BlackZon weblloc web per obtenir les dades de contacte més actualitzades.
Protection plans may be available for purchase separately to extend coverage beyond the manufacturer's warranty. Please check with your retailer for details on available protection plans.





