Danfoss 25T65 077B0025

Danfoss 25T65 Thermostat 077B0025 User Manual

Model: 25T65 077B0025

1. Introducció

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Danfoss 25T65 Thermostat, model 077B0025. This thermostat is designed for use in freezer applications without an alarm function. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Informació de seguretat

WARNING: Risk of electric shock. Installation and service should only be performed by qualified personnel.

3. Característiques del producte

The Danfoss 25T65 Thermostat 077B0025 offers reliable temperature control for freezer units. Key features include:

4. Especificacions

ParàmetreValor
MarcaDanfoss
Número de model077B0025
Designació del tipusB0 Standard Thermostat
AplicacióFreezers without alarm
Hot Turn-on Temperature-15.0°C
Hot Turn-off Temperature-23.0°C
Cold Turn-on Temperature-21.9°C
Cold Turn-off Temperature-32.0°C
Longitud del tub capil·lar800 mm
Tipus de connector6.3 x 0.8 mm
AprovacionsBEAB, CE, EAC, LLC, CDC, TYSK, CURus

5. Instal·lació i configuració

Installation of the Danfoss 25T65 Thermostat 077B0025 should be performed by a qualified technician. Incorrect installation can lead to appliance malfunction or safety hazards.

5.1 Comprovacions prèvies a la instal·lació

5.2 Passos d'instal·lació

  1. Desconnecteu l'alimentació: Turn off the main power supply to the freezer at the circuit breaker.
  2. Termòstat d'accés: Locate and carefully remove the access panel or control housing where the thermostat is situated.
  3. Elimina el termòstat antic:
    • Note or photograph the wiring connections before disconnecting them.
    • Carefully detach the capillary tube from its mounting clips and remove it from the freezer compartment.
    • Unmount the old thermostat.
  4. Instal·lar un termòstat nou:
    • Mount the new Danfoss 25T65 Thermostat in the same location as the old one.
    • Carefully route the new capillary tube into the freezer compartment, ensuring it is not kinked or damaged. Secure it with mounting clips if provided. The capillary tube tip should be placed in the same position as the original for accurate temperature sensing.
    • Connect the electrical wires to the thermostat terminals (6.3 x 0.8 mm connectors) according to the wiring diagram or your previous notes. Ensure connections are secure.
  5. Assegurar i provar:
    • Replace any access panels or control housings.
    • Restore power to the freezer.
    • Monitor the freezer's temperature to ensure the thermostat is functioning correctly and maintaining the desired temperature range.
Danfoss 25T65 Thermostat 077B0025 front view

Figura 1: Frontal view of the Danfoss 25T65 Thermostat 077B0025, showing the model number and temperature markings.

Danfoss 25T65 Thermostat 077B0025 with coiled capillary tube

Figura 2: De dalt a baix view of the Danfoss 25T65 Thermostat 077B0025, illustrating the coiled capillary tube and electrical terminals.

Close-up of Danfoss 25T65 Thermostat 077B0025 electrical terminals

Figura 3: Detallada view of the electrical terminals on the Danfoss 25T65 Thermostat 077B0025, showing the 6.3 x 0.8 mm connectors.

6. Instruccions de funcionament

The Danfoss 25T65 Thermostat 077B0025 is an automatic temperature control device. Once properly installed, it regulates the freezer's temperature by cycling the compressor on and off based on the temperature sensed by its capillary tube.

7. Manteniment

The Danfoss 25T65 Thermostat 077B0025 is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

No user-serviceable parts inside. For any issues beyond basic inspection, consult a qualified technician.

8. Solució De Problemes

If you experience issues with your freezer's temperature control, consider the following common troubleshooting steps. Always disconnect power before inspecting internal components.

ProblemaCausa possibleSolució
El congelador no es refreda
  • No hi ha electricitat al congelador.
  • Thermostat faulty.
  • Capillary tube damaged or improperly placed.
  • Other freezer component failure (e.g., compressor, fan).
  • Comproveu la font d'alimentació i l'interruptor.
  • Test thermostat continuity with a multimeter (by a qualified technician).
  • Inspect capillary tube for kinks or dislodgement.
  • Consult a qualified appliance repair technician.
Freezer too cold / Freezing excessively
  • Thermostat faulty (stuck in 'on' position).
  • Temperatura massa baixa.
  • Test thermostat continuity (by a qualified technician).
  • Adjust temperature setting to a warmer level.
Freezer cycles too frequently
  • Poor door seal.
  • Capillary tube not sensing temperature correctly.
  • Thermostat faulty.
  • Check and replace door seals if necessary.
  • Ensure capillary tube is correctly positioned.
  • Consult a qualified technician for thermostat diagnosis.

If these steps do not resolve the issue, it is recommended to contact a qualified appliance repair professional.

9. Garantia i Suport

Specific warranty information for the Danfoss 25T65 Thermostat 077B0025 is typically provided at the point of purchase or with the original appliance documentation. Please refer to your purchase receipt or contact the seller for details regarding warranty coverage.

For technical support or further assistance, please contact Danfoss customer service or a certified Danfoss service partner. Contact information can usually be found on the official Danfoss weblloc web o a través del proveïdor del producte.

Documents relacionats - 25T65 077B0025

Preview Guia d'aplicació dels termòstats Danfoss Link™ i Connect per al control de la calefacció
Aquesta guia d'aplicació de Danfoss proporciona informació completa sobre els sistemes de control de calefacció Danfoss Link™ i Connect Thermostats. Cobreix els components del sistema, les directrius generals per al subministrament de calor i la gestió de les habitacions, i detalla les aplicacions per a calderes, calderes centrals, calefacció urbana i bombes de calor, optimitzant l'eficiència energètica i el confort en entorns residencials.
Preview Guia de l'usuari del sistema de calefacció intel·ligent Danfoss Ally™
Guia d'usuari completa per al sistema de calefacció intel·ligent Danfoss Ally™, que cobreix la instal·lació, les característiques, les especificacions tècniques i la resolució de problemes del Gateway, el termòstat del radiador, el sensor d'ambient, el relé de la caldera, el Protect RA, el mòdul d'alimentació i els termòstats Icon™/Icon2™.
Preview Guia d'instal·lació de termòstats de servei Danfoss tipus 077B7
Guia d'instal·lació per als termostats de servei Danfoss tipus 077B7 (models 077B7001-077B7008). Proporciona especificacions detallades, configuracions de temperatura, longituds capil·lars i informació d'aplicació per a refrigeradors, congeladors i cambres frigorífiques.
Preview Guia d'instal·lació de termòstats de servei Danfoss 077B7
Guia d'instal·lació per als termostats de servei Danfoss de la sèrie 077B7, que cobreix models per a armaris de gelats, neveres comercials, refrigeradors de líquids i més. Inclou especificacions tècniques i detalls d'aplicació.
Preview Guia de l'usuari del sistema de calefacció intel·ligent Danfoss Ally™
Guia d'usuari completa per al sistema de calefacció intel·ligent Danfoss Ally™, que cobreix la instal·lació, l'ús de l'aplicació, les funcions, la configuració i la resolució de problemes del Danfoss Ally™ Gateway i dels termòstats de radiador.
Preview Danfoss Icon2™ Room Thermostat Wiring Guide: Star and Serial Configurations
Detailed guide on wiring Danfoss Icon2™ room thermostats using star and serial configurations, including terminal connections and capacity limits for HVAC systems.