TEEHO TE342 Smart Keyless Entry Door Lock User Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your TEEHO TE342 Fingerprint Smart Keyless Entry Door Lock. Please read this guide thoroughly before installation and use to ensure proper functionality and security. Keep this manual for future reference.

Què hi ha a la caixa

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Pany intel·ligent de la porta amb empremta digital
• Placa de muntatge
• Cargols (diverses mides)
• Pestillo
• Vaga
• 2 claus de còpia de seguretat
• Manual d'instruccions
• Manual d'usuari

Configuració i instal·lació

1. Check Door Compatibility

Before installation, ensure your door dimensions are compatible with the TE342 lock. Refer to the diagram below for required measurements.

Imatge: Door compatibility measurements including door thickness (1-3/8" to 2"), backset (2-3/8" or 2-3/4"), door hole diameter (1-1/2" or 2-1/8"), and latch hole (1" deep).

• Gruix de la porta: 1-3/8" a 2" (35 mm a 50 mm)
• Part posterior: 2-3/8" o 2-3/4" (60 mm o 70 mm)
• Diàmetre del forat de la porta: 1-1/2" o 2-1/8" (38 mm o 54 mm)
• Latch Hole Depth: Minimum 1" (25mm)

2. Guia de vídeo d'instal·lació

For a visual step-by-step guide, please watch the official installation video:

3. Step-by-Step Installation Overview

1. Instal·leu el tancament: Insert the latch into the door edge. Adjust its length (60mm or 70mm backset) if necessary by rotating and pulling the mechanism. Secure it with the provided screws.
2. Instal·leu el conjunt exterior: Pass the cable and spindle through the door hole. Ensure the tailpiece is horizontal. If your door hole is 38mm (1-1/2"), remove the spacer from the exterior assembly before installation.
3. Assegureu la placa de muntatge: Position the mounting plate on the interior side of the door, aligning it with the exterior assembly. Secure it using the mounting plate screws.
4. Connecteu el muntatge interior: Connect the cable from the exterior assembly to the interior assembly. Ensure the thumb turn on the interior assembly is in a vertical position.
5. Instal·lació del conjunt interior: Attach the interior assembly to the mounting plate. Secure it with the interior assembly screws.
6. Insereix les piles: Load 4 AA alkaline batteries into the battery compartment. Ensure correct polarity.
7. Restableix el bloqueig: Press and hold the reset button for 5 seconds until you hear a 'BEEP'. The latch will rotate and extend automatically.

Instruccions de funcionament

1. Mètodes de desbloqueig

The TEEHO TE342 offers multiple convenient ways to unlock your door:

Imatge: Multiple ways to access the TEEHO TE342 smart lock.

• APP Unlocking: Use the KK Home app on your smartphone to unlock the door remotely via Bluetooth.
• Desbloqueig de les empremtes digitals: Register up to 20 fingerprints for quick access. The lock features 0.3-second recognition time with AI self-learning technology.
• Introducció de contrasenya: Set up to 20 unique passwords for family members or regular visitors.
• Contrasenyes d'un sol ús: Generate temporary, single-use passwords for visitors, which are automatically deleted after use.
• Claus mecàniques: Two spare keys are provided for emergency manual unlocking.

2. Funcions de control de l'aplicació

Manage your lock conveniently through the KK Home app:

Imatge: App Control via Bluetooth for the TEEHO smart lock.

• Accés remot: Grant permanent or temporary unlocking access to family members or remotely generate one-time passwords for visitors.
• Real-time Log Records: Track all lock and unlock activities in real-time, providing better control over your home security.
• Gestionar usuaris: Differentiate between family (full permissions) and guest (limited permissions) access.
• Offline Random Passcode: Generate a random password (valid for 30 minutes) anytime, anywhere, even without an internet connection.
• Contrasenya anti-peeping: Enter random numbers before or after the correct password to protect your code from being exposed.

For a detailed guide on app operations, please watch the official app operation video:

3. Auto-Lock and One-Touch Locking

Enhance your security with automatic locking features:

Imatge: Auto Lock & 2-Second Locking features.

• Bloqueig automàtic: The door lock automatically engages after a customizable delay of 10-99 seconds. This feature can be configured via the app.
• Bloqueig d'un sol toc: From the outside, simply press and hold any key on the keypad for 2 seconds to instantly lock the door.

Manteniment

1. Substitució de la bateria

The lock requires 4 AA alkaline batteries. Replace all batteries at once with new ones when the low battery reminder is activated (typically below 20%). Avoid mixing different types of batteries.

Imatge: Long Battery Life illustration, showing the battery compartment and a USB-C port for emergency power.

In case of complete battery drain, an emergency Type-C port is available on the exterior assembly for temporary power to unlock the door.

2. Condicions ambientals

The TEEHO TE342 is designed to withstand various weather conditions, with an IP54 rating for dust and water resistance. It operates effectively in temperatures ranging from -31°F to 151°F.

Imatge: Works Well in All Weather, highlighting the lock's durability in extreme temperatures and its IP54 waterproof rating.

Resolució de problemes

1. Problemes de connexió Wi-Fi

If you encounter Wi-Fi connection issues during setup:

1. Restableix el bloqueig: Manteniu premut el botó de restabliment durant 5 segons.
2. Check Bluetooth & Wi-Fi: Ensure Bluetooth is enabled on your phone, your home Wi-Fi (2.4GHz only) is active, the router is functioning, and the lock is within 10 meters of the router.
3. Actualitza l'aplicació: Ensure your KK Home app is updated to the latest version.
4. Comproveu la bateria: Confirm the lock's battery is over 20%.
5. Verify Cables: Ensure connection cables are properly inserted.

2. La bateria s'esgota ràpidament

If your smart lock's batteries are draining quickly:

1. Check for Misalignment: Ensure the lock is correctly aligned and the hole depth of the door frame exceeds 25mm.
2. Inspect Connection Wires: Ensure connection wires are correctly installed to prevent power supply issues.
3. Verify Screw Installation: Check if the lock is securely installed using the provided screws.
4. Utilitzeu piles alcalines: Confirm you are using recommended 4 alkaline batteries. Replace all at once with new ones when needed.

3. Lock Not Working

If your smart lock is unresponsive:

1. Restableix el bloqueig: Manteniu premut el botó de restabliment durant 5 segons.
2. Comproveu la potència de la bateria: Ensure the lock's battery is over 20%.
3. Update App and Firmware: Make sure your smart lock's app and firmware are up to date.
4. Inspect Connection Wires: Ensure connection cables are properly inserted. Try to re-install the door lock.
5. Substituïu les piles: Confirm you are using recommended 4 alkaline batteries.

If issues persist, kindly provide the following details via email or phone call for further assistance:

• ESN number
• User account name for the KK Home App
• A photo or video of the lock
• Phone model, system version
• KK Home App version

Especificacions

Garantia i Suport

TEEHO offers a 30-day return and 1-year exchange service for this product. Additionally, lifetime after-sales service is provided to every customer.

• Assistència telefònica en línia: Available Monday to Friday, 9 AM to 5 PM EST.
• 24/7 After-Sales Email Service: Per a qualsevol consulta o ajuda.

Please refer to your product packaging or the official TEEHO weblloc web per obtenir la informació de contacte més actualitzada.