Dskeuzeew 2.5HP Walking Pad Treadmill User Manual

1. Introducció

Thank you for choosing the Dskeuzeew 2.5HP Walking Pad Treadmill. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new fitness equipment. Please read this manual thoroughly before first use and retain it for future reference.

Image: The Dskeuzeew Walking Pad Treadmill, showcasing its compact design and a user engaging in a walking exercise.

2. Configuració

The Dskeuzeew Walking Pad Treadmill is designed for immediate use with no installation required. It arrives pre-assembled, allowing you to begin your workout shortly after unboxing.

2.1 Desembalatge i col·locació inicial

1. Traieu amb cura la cinta de córrer del seu embalatge.
2. Place the treadmill on a flat, stable surface. Avoid placing it on carpets, as this may affect heat dissipation.
3. Ensure the power cord is accessible to a wall outlet.

2.2 Connexió d'alimentació

• Connecteu el cable d'alimentació a l'entrada d'alimentació de la cinta de córrer.
• Connecteu el cable d'alimentació a una presa de corrent estàndard.
• Locate the main power switch (often red) on the treadmill and turn it to the "ON" position. The LED display should illuminate.

2.3 Handle Setup (if applicable)

This model features a foldable handle. Ensure it is securely locked in the upright position for use or folded down for under-desk operation or storage.

Image: The Dskeuzeew Walking Pad Treadmill demonstrating its foldable handle for versatile use and storage.

3. Instruccions de funcionament

3.1 Funcionament del control remot

The treadmill is primarily controlled via a smart remote control. This remote is magnetic and can be conveniently stored on the side of the treadmill.

• Encès/apagat: Press the "ON/OFF" button to start or stop the treadmill. It will typically perform a 3-second countdown before starting.
• Ajust de velocitat: Use the "+" and "-" buttons to increase or decrease the speed. Speed ranges from 0.6 MPH to 5.0 MPH.
• Selecció del mode: The "M" button allows you to switch between different exercise modes or programs.
• Botons de velocitat ràpida: Some remotes feature quick-speed buttons (e.g., 2, 3, 4 MPH) for instant speed changes.

Image: Close-up of the treadmill's LED display and the remote control, highlighting key functions.

3.2 Pantalla tàctil

The integrated LED display shows essential exercise data:

• Velocitat: Velocitat actual de caminar/córrer.
• Distància: Distància total recorreguda.
• Hora: Durada del teu entrenament.
• Calories cremades: Estimated calories consumed during exercise.
• Restablir: A dedicated button (often far left) can reset time and calories.

3.3 Ajust d'inclinació

The treadmill features a manual incline function:

1. Locate the adjustable legs at the rear of the treadmill.
2. Remove the securing pin from the current position.
3. Raise the treadmill to the desired incline level.
4. Insert the securing pin into the higher hole to lock the incline in place.
5. Ensure both sides are adjusted evenly for stability.

4. Manteniment

4.1 Lubricació de la corretja de funcionament

Regular lubrication of the running belt is crucial for optimal performance and longevity of your treadmill. Use the provided silicone oil.

1. Apagueu i desconnecteu la cinta de córrer.
2. Carefully lift the running belt to expose the deck underneath.
3. Apply a small amount of silicone oil evenly across the center of the deck, beneath the belt.
4. Lower the belt and turn on the treadmill at a low speed (e.g., 0.6 MPH) for 3-5 minutes to distribute the lubricant.

4.2 Running Belt Adjustment (Deviation)

If the running belt shifts to one side, it needs adjustment to prevent wear and ensure safe operation. Use the provided hex wrench.

1. Apagueu i desconnecteu la cinta de córrer.
2. Identify which side the belt has shifted towards.
3. If the belt has shifted to the dret, insert the hex wrench into the right adjustment hole and rotate 90 degrees clockwise.
4. If the belt has shifted to the esquerra, insert the hex wrench into the left adjustment hole and rotate 90 degrees clockwise.
5. Turn on the treadmill at a low speed (e.g., 1 km/h) and observe the belt. Adjust further in small increments if necessary until the belt is centered.

5. Solució De Problemes

• La cinta de córrer no s'encén: Ensure the power cord is securely plugged into both the treadmill and a working wall outlet. Check the main power switch is in the "ON" position.
• Belt shifting/slipping: Refer to the "Running Belt Adjustment" section in Maintenance. Ensure the belt is properly lubricated.
• Sorolls inusuals: Check for any loose parts or foreign objects under the belt. Ensure the belt is properly aligned and lubricated. If noises persist, contact customer support.
• El comandament a distància no respon: Comproveu la pila del comandament a distància. Assegureu-vos que no hi hagi cap obstrucció entre el comandament a distància i el sensor de la cinta de córrer.
• Sobreescalfament: Avoid placing the treadmill on thick carpets which can impede heat dissipation. Ensure adequate ventilation around the motor area.

6. Especificacions

7. Garantia

The Dskeuzeew Walking Pad Treadmill comes with a 2 any de garantiaSi us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.

8. Atenció al client

Should you require any assistance with your Dskeuzeew Walking Pad Treadmill, please do not hesitate to contact the Dskeuzeew after-sales service team. They are available to help with any questions or issues you may encounter.

Nota important: Carpets will affect the heat dissipation of the Treadmill. Do not place the Treadmill on the carpet.