1. Introducció
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Bewinner Micro ATX Motherboard. This motherboard is designed for server and gaming desktop applications, supporting LGA2011 V1/V2 CPUs and DDR3 memory.
Imatge 1.1: De dalt a baix view of the Bewinner Micro ATX Motherboard, showing the CPU socket, RAM slots, and various connectors.
2. Especificacions del producte
| Característica | Especificació |
|---|---|
| Tipus d'element | Placa base DDR3 |
| Material | Placa de circuit imprès |
| Chipset | H61 Express Chipset |
| Tipus de sòcol de la CPU | LGA2011 V1/V2 |
| Emmagatzematge | 1 x M.2 NVMe/NGFF Slot + 3 x SATA 2.0 (3GB/s) Ports |
| Xarxa | LAN de 100/1000 Mbps |
| Onboard Sound Card | Integrated Sound for ALC 6 Channels |
| Bateria | 240mAh (Inbuilt) |
| Factor de forma | Micro ATX (17 x 21.5cm / 6.7 x 8.5in) |
| Tecnologia de memòria RAM | DDR3 |
| Velocitat de rellotge de memòria | 1600 MHz |
| Mida màxima de la memòria RAM | 64 GB |
| Ranures de memòria disponibles | 2 |
| Interfície de la targeta gràfica | Integrated, PCI, PCI Express |
3. Configuració i instal·lació
3.1 Instal·lació de la CPU
Carefully open the CPU socket retention arm. Align the triangular mark on your LGA2011 V1/V2 CPU with the corresponding mark on the socket. Gently place the CPU into the socket without forcing it. Close the retention arm to secure the CPU.
Imatge 3.1: Primer pla view of the LGA2011 CPU socket, showing the retention mechanism.
3.2 Instal·lació de la memòria RAM
Locate the DDR3 memory slots. Open the clips on both ends of the slot. Align the notch on your DDR3 memory module with the key in the slot. Press down firmly on both ends of the memory module until the clips snap into place.
3.3 Instal·lació d'emmagatzematge
- M.2 NVMe/NGFF SSD: Locate the M.2 slot. Insert the M.2 SSD at an angle and then gently push it down. Secure it with the provided screw.
- Unitats SATA: Connect your SATA 2.0 (3GB/s) storage devices (HDDs/SSDs) to the available SATA ports using SATA data cables. Ensure power cables are also connected to your drives from the power supply.
Imatge 3.2: View of the chipset heatsink and SATA ports on the motherboard.
3.4 Connexions d'alimentació
Connect the 24-pin ATX power connector and the 8-pin (or 4-pin) CPU power connector from your power supply unit (PSU) to the corresponding ports on the motherboard.
3.5 Connexions perifèriques
Connect your case's front panel connectors (power button, reset button, USB ports, audio jacks) to the appropriate headers on the motherboard. Connect USB devices, Ethernet cable, and audio devices to the rear I/O panel.
Imatge 3.3: Primer pla view of the rear I/O panel, showing USB ports, LAN port, and audio jacks.
4. Instruccions de funcionament
4.1 Encès inicial
After all components are securely installed and connected, ensure your power supply is switched on. Press the power button on your computer case. The system should initiate the boot process.
4.2 Accés a la BIOS/UEFI
During startup, repeatedly press the designated key (commonly DEL, F2, o F10) to enter the BIOS/UEFI setup utility. Here you can configure boot order, system time, and other hardware settings.
4.3 Instal·lació del controlador
After installing your operating system, install the necessary drivers for the chipset, LAN, and audio components. These drivers are typically provided on a support CD or available for download from the manufacturer's weblloc.
5. Manteniment
5.1 Neteja general
Netegeu regularment la pols de la caixa de l'ordinador i dels components de la placa base amb aire comprimit. Assegureu-vos que el sistema estigui apagat i desendollat abans de netejar-lo.
5.2 CMOS Reset
If you encounter system instability or boot issues, resetting the CMOS (Complementary Metal-Oxide-Semiconductor) can resolve problems by restoring BIOS settings to default. This can typically be done by removing the small coin-cell battery on the motherboard for a few minutes, or by using a dedicated CMOS clear jumper (refer to the motherboard layout for location).
5.3 Contact Cleaning
In cases of poor contact leading to issues, carefully remove and re-seat components such as RAM, CPU, and graphics card. The metal contacts on these components can be gently wiped with a clean, soft eraser to improve conductivity. Ensure the system is powered off and unplugged before handling internal components.
6. Solució De Problemes
If you experience issues such as no display, no power, no screen, or problems with the network or sound card after installation, consider the following steps:
- Comproveu les connexions d'alimentació: Ensure all power cables (24-pin ATX, CPU power) are securely connected to the motherboard and the power supply.
- Check Component Seating: Confirm that the CPU, RAM modules, and any installed graphics cards are correctly and fully seated in their respective slots.
- Restabliment del CMOS: Perform a CMOS reset as described in Section 5.2.
- Contactes nets: If issues persist, carefully remove and clean the metal contacts of the CPU, memory, and graphics card using a soft eraser, then re-install them.
- Prova amb components mínims: Try booting the system with only essential components installed (CPU, one RAM stick, power supply, and a display connected to the integrated or dedicated graphics).
- Check Peripherals: Ensure all external peripherals are correctly connected and functional.
7. Informació de la garantia
Specific warranty details for the Bewinner Micro ATX Motherboard are not provided in this manual. Please refer to the official Bewinner website or contact your point of purchase for comprehensive warranty terms and conditions.
8. Suport tècnic
For technical assistance or further inquiries regarding your Bewinner Micro ATX Motherboard, please visit the official Bewinner support website or contact the seller directly. Ensure you have your model number (Bewinnerc2ka0f6idt) available when seeking support.
