Manual d'usuari del rellotge Timex Expedition North Ridge de 43 mm per a home

1. Producte acabatview

The Timex Expedition North Ridge 43mm Watch is a robust and versatile timepiece designed for adventure. It features a durable 43mm round case, a striking blue dial, and a comfortable 8-inch tan strap. Equipped with a mineral glass lens, this watch is built to withstand the elements, offering water resistance up to 100 meters. Its chronograph functionality provides precise timing capabilities, making it an ideal companion for various activities.

Figura 1: Frontal view del rellotge Timex Expedition North Ridge de 43 mm, mostraasing its blue dial, chronograph sub-dials, and tan leather strap.

Figure 2: The Timex Expedition series is engineered for exploration and durability.

2. Configuració inicial

2.1. Configuració de l'hora i la data

1. Estireu la corona: Gently pull the crown (located on the right side of the watch case) out to position 2 for time setting, or position 1 for date setting.
2. Establir hora: Rotate the crown to move the hour and minute hands clockwise until the desired time is displayed. For watches with a date function, ensure you pass 12 AM to advance the date if necessary.
3. Establir data: If applicable, pull the crown to position 1 and rotate it to adjust the date.
4. Empenyeu la corona cap a dins: Once the time and date are set, push the crown back into position 0 to engage the movement and start the watch.

Figura 3: lateral view il·lustrant la corona del rellotge i els polsadors del cronògraf.

2.2. Informació de la bateria

Your Timex Expedition North Ridge watch comes with one Lithium Metal battery pre-installed. The battery is designed for long-lasting performance. When the battery requires replacement, it is recommended to have it replaced by a qualified watch technician to ensure proper sealing and water resistance integrity.

3. Funcionament del rellotge

3.1. Cronometratge bàsic

The watch continuously displays the current time (hours, minutes, seconds) once the crown is pushed back into position 0 after initial setup.

3.2. Ús del cronògraf

The chronograph function allows for precise measurement of elapsed time. It typically features two pushers on the side of the watch case, in addition to the crown.

1. Inici/Parada: Press the top pusher to start the chronograph. Press it again to stop the chronograph.
2. Restablir: While the chronograph is stopped, press the bottom pusher to reset all chronograph hands back to their zero positions.

Nota: If the chronograph hands do not reset to zero, refer to the Troubleshooting section for adjustment instructions.

3.3. Llum nocturna INDIGLO®

Your Timex watch features the INDIGLO® night-light, which illuminates the entire watch dial for easy reading in low-light conditions. To activate, simply press and hold the crown (or a designated pusher, if different) briefly. The light will remain on as long as the button is pressed.

3.4. Resistència a l'aigua

This watch is water resistant up to 100 meters (330 feet). This rating makes it suitable for showering, swimming, and snorkeling. It is no suitable for scuba diving or high-impact water sports. Always ensure the crown is fully pushed in before exposing the watch to water.

Figure 4: The Expedition watch is engineered to perform in various outdoor environments.

4. Cura i Manteniment

4.1. Neteja

Per netejar el rellotge, netegeu-lo suaument amb un drap suauamp cloth. For metal parts, a mild soap solution can be used, followed by rinsing with clean water and thorough drying. Avoid using harsh chemicals or abrasive materials, as these can damage the watch finish or strap.

4.2. Substitució de la bateria

When the battery needs replacement, it is strongly recommended to take your watch to an authorized Timex service center or a reputable watch repair shop. This ensures the correct battery type is used and the watch's water resistance is maintained after the case back is opened and resealed.

Figure 5: The case back of the Timex Expedition North Ridge watch.

4.3. Cura de la resistència a l'aigua

Per mantenir la resistència a l'aigua del rellotge:

• No feu funcionar la corona ni els polsadors quan el rellotge estigui mullat o submergit.
• Avoid exposing the watch to extreme temperature changes (e.g., hot showers followed by cold water), as this can compromise seals.
• Have the water resistance seals checked periodically (e.g., every 2-3 years) by a professional, especially if the watch is frequently exposed to water.

5. Solució De Problemes

5.1. Watch Not Running

• Check Crown: Ensure the crown is fully pushed in to position 0.
• Bateria: If the watch stops completely, the battery may need replacement. See Section 4.2.

5.2. Chronograph Hands Not Resetting to Zero

If the chronograph hands (e.g., seconds, minutes, or hour sub-dials) do not return precisely to their zero positions when reset, they may need calibration. This process typically involves pulling the crown out to a specific position and using the pushers to advance the hands incrementally until they align with zero. Refer to the detailed instructions provided with your watch's specific movement or contact Timex customer support for precise calibration steps.

5.3. Water Inside Watch

If condensation or water appears inside the watch, immediately take it to an authorized service center. Do not attempt to dry it yourself, as this can cause further damage.

6. Especificacions del producte

7. Garantia i atenció al client

Timex watches are manufactured to the highest quality standards and are warranted against manufacturing defects for a specified period from the date of purchase. Please refer to the warranty card included with your watch for specific terms and conditions, as well as details on how to obtain service under warranty.

For further assistance, technical support, or warranty claims, please contact Timex Customer Service or visit the official Timex website. You can find more information and support resources at the Botiga Timex a Amazon.