1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your iMaihom 150W 15000LM LED Motion Sensor Flood Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. This flood light is designed for outdoor use, offering high brightness and multiple operational modes for enhanced security and convenience.
Image 1.1: The iMaihom 150W LED Motion Sensor Flood Light with its remote control.
2. Informació de seguretat
Si us plau, observeu les següents precaucions de seguretat per evitar lesions o danys:
- Seguretat elèctrica: Installation must be performed by a qualified electrician or in accordance with local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
- Muntatge: Mount the fixture securely to a stable surface. Do not mount on ceilings.
- Calor: The LED light heads can become warm during operation. Avoid touching them directly.
- Resistència a l'aigua: The fixture is IP65 rated for outdoor use, protecting against dust and water jets. However, it should not be submerged in water.
- Font de llum: Do not stare directly into the LED light source when illuminated, as this may cause eye strain or damage.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- iMaihom 150W LED Motion Sensor Flood Light
- Control remot
- Maquinari de muntatge (cargols, ancoratges de paret)
- Manual d'usuari (aquest document)
4. Característiques del producte
The iMaihom 150W LED Motion Sensor Flood Light offers advanced features for outdoor lighting:
- Alt Brillantor: 150W power output, delivering up to 15000 lumens of 6500K daylight white light.
- Disseny ajustable: Three independently adjustable light heads for wide area coverage (up to 1977 sq.ft).
- Sensor de moviment sensible: 180° sensing angle with a detection range of up to 50 feet.
- Múltiples modes: PIR (Motion Sensor) Mode, Dusk-to-Dawn (D2D) Mode, and Always-On Mode.
- Comandament a distància: Convenient wireless control for mode selection, timing, and brightness adjustment.
- Connexió de grup: Ability to link multiple lights to activate simultaneously when motion is detected (PIR mode only).
- Construcció duradora: IP65 waterproof rating and full metal (aluminum) design for excellent heat dissipation and weather resistance.
Image 4.1: The IP65 waterproof design ensures reliable operation in various weather conditions.
Image 4.2: The full metal design with heat dissipation fins ensures optimal performance and longevity.
5. Configuració i instal·lació
Segueix aquests passos per a una instal·lació segura i eficaç:
5.1 Ubicació de muntatge
Choose a suitable outdoor location for wall mounting. The recommended mounting height for optimal motion detection is 8-16 feet. Ensure the area is clear of obstructions that might interfere with the motion sensor's field of view.
5.2 Cablejat
- Desconnecteu l'alimentació: Turn off the power at the circuit breaker before starting any wiring.
- Prepareu els cables: Connect the household wiring to the flood light's wires according to local electrical codes. Typically, this involves connecting the live (black) wire, neutral (white) wire, and ground (green/bare copper) wire.
- Connexions segures: Use appropriate wire connectors and ensure all connections are secure and insulated.
5.3 Muntatge de l'aparell
- Col·loqueu la placa de muntatge: Fixeu la placa de muntatge a la paret amb els cargols i els ancoratges proporcionats.
- Mount Light Fixture: Attach the flood light fixture to the mounting plate, ensuring it is firmly secured.
- Ajustar els capçals de llum: Adjust the three light heads to cover the desired lighting area. Each head can be adjusted vertically and horizontally.
- Ajusta el sensor de moviment: Position the motion sensor for optimal detection coverage. It can be adjusted to achieve a 180° sensing angle.
Image 5.1: The flood light supports both soffit and wall mounting (note: not for ceiling mount).
Image 5.2: The light heads and motion sensor offer extensive adjustability for precise coverage.
6. Instruccions de funcionament
The iMaihom flood light can be controlled using the included remote. Ensure the remote has working batteries.
6.1 Control remotview
Image 6.1: RF Remote Controller functions for easy operation.
- PIR Function: Low/High sensing distance, 1Min/5Min/10Min sensing delay.
- Mode D2D: Dusk-to-Dawn mode with 3H/6H/8H timing options.
- Sempre ENCÈS/APAGAT: Manual override for constant light.
- Brillantor ajustable: Ajusta la intensitat de la llum.
- Maridatge: Buttons for pairing main and auxiliary lights, and canceling pairing.
6.2 Modes de funcionament
The flood light features three primary operating modes:
6.2.1 PIR Mode (Motion Sensor Mode)
In PIR mode, the light activates when motion is detected and turns off after a set delay if no further motion is sensed. This mode is ideal for security and energy saving.
- Premeu el botó PIR button on the remote to activate. The light will flash, entering test mode.
- Ús Baix/Alt to set sensing distance.
- Ús 1Min/5Min/10Min to set the lighting delay time after motion stops.
Image 6.2: Setting up PIR (Motion Sensor) Mode.
6.2.2 D2D Mode (Dusk-to-Dawn Mode)
In D2D mode, the light automatically turns on at dusk and off at dawn. You can set a specific duration for the light to remain on after dusk.
- Premeu el botó D2D button on the remote. The light will flash, indicating entry into light sensing mode.
- Seleccioneu 3H / 6H / 8H for the desired lighting duration.
- To cancel timing, press the Timer Esc clau.
Image 6.3: Setting up D2D (Dusk-to-Dawn) Mode.
6.2.3 Always-On Mode
This mode keeps the light continuously on until manually turned off. It does not have a timing function.
- Premeu el botó Sempre ON button to activate constant light.
- Premeu el botó Sempre APAGAT button to turn the light off.
- To cancel any active timing, press the Timer Esc clau.
Image 6.4: Activating and deactivating Always-On Mode.
6.3 Group Connection (PIR Mode Only)
Multiple iMaihom flood lights can be linked to activate together when one detects motion. This function is only available in PIR mode.
- To pair a main light, press the Principal button on the remote while pointing at the desired main light.
- To pair an auxiliary light, press the Auxiliar button on the remote while pointing at the desired auxiliary light.
- Per cancel·lar l'aparellament, premeu el botó Pairing Esc botó.
Image 6.5: Group connection allows multiple lights to activate simultaneously.
7. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga durada del vostre llum d'inundació.
- Neteja: Netegeu periòdicament els capçals de les llums i la lent del sensor de moviment amb un drap suau i sec.amp drap per eliminar la pols i les restes. No utilitzeu productes de neteja abrasius ni dissolvents.
- Inspecció: Regularly inspect the wiring and mounting for any signs of wear, damage, or loosening. Address any issues promptly.
- Sense peces reparables per l'usuari: The LED light source is integrated and not user-replaceable. Do not attempt to open the light heads.
8. Solució De Problemes
If you encounter issues with your iMaihom flood light, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power, incorrect wiring, remote battery dead, light in Always OFF mode. | Check circuit breaker. Verify wiring connections. Replace remote battery. Press 'Always ON' button. |
| El sensor de moviment no detecta. | Sensor obstructed, incorrect sensitivity setting, light in D2D or Always ON mode. | Clear obstructions. Adjust sensor angle. Set sensitivity to 'High'. Ensure light is in PIR mode. |
| La llum es manté encesa contínuament. | Light in Always ON mode, D2D mode active, continuous motion detected. | Press 'Always OFF' or switch to PIR mode. Check D2D timing. Ensure no constant motion in sensor range. |
| El comandament a distància no funciona. | Dead battery, out of range, signal obstruction. | Replace remote battery. Move closer to the light. Ensure clear line of sight to the light's sensor. |
| Group connection not working. | Not in PIR mode, lights not properly paired, lights too far apart. | Ensure all lights are in PIR mode. Re-pair lights. Ensure lights are within 85ft (25m) of each other. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
9. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | BDD150G-3 |
| Consum d'energia | 150W |
| Brillantor | 15000 lúmens |
| Temperatura de color | 6500K (blanc llum del dia) |
| Voltage | 120 V AC |
| Material | Alumini |
| Resistència a l'aigua | IP65 |
| Angle del sensor de moviment | 180° |
| Distància del sensor de moviment | Fins a 50 peus |
| Zona d'il·luminació | Fins a 1977 peus quadrats |
| Dimensions del producte | 15.78 cm de llargada x 6.18 cm d'amplada x 4.64 cm d'alçada |
| Pes de l'article | 2 lliures |
| Mètode de control | Control remot |
10. Garantia i Suport
10.1 Informació de la garantia
iMaihom products are designed for quality and reliability. For specific warranty details regarding your 150W LED Motion Sensor Flood Light, please refer to the warranty card included with your purchase or visit the official iMaihom weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
10.2 Atenció al client
If you have any questions, require technical assistance, or need to report an issue with your product, please contact iMaihom customer support. Contact information can typically be found on the product packaging, the official iMaihom weblloc web o a través del vostre distribuïdor.
When contacting support, please have your product model number (BDD150G-3) and purchase date available.
