1. Introducció
This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject T2 W Turntable. Please read these instructions carefully before using the device to ensure optimal performance and longevity.
2. Instruccions de seguretat
- Always handle the turntable with care. Avoid dropping or subjecting it to strong vibrations.
- Desconnecteu l'alimentació abans de netejar o realitzar qualsevol manteniment.
- Keep the turntable away from direct sunlight, heat sources, and moisture.
- No intenteu desmuntar ni reparar la unitat vosaltres mateixos. Encarregueu tot el manteniment a personal qualificat.
- Assegureu-vos una ventilació adequada al voltant de la unitat.
3. Contingut del paquet
Verifiqueu que tots els elements que s'enumeren a continuació siguin presents al vostre paquet:
- Pro-Ject T2 W Turntable
- Font d'alimentació
- Funda antipols
- Plat
- Mat de feltre
- Contrapès
- Pes antipatinatge
- Cable de fono RCA
- Manual d'usuari (aquest document)
4. Configuració
4.1 Desembalatge i col·locació
Carefully remove all components from the packaging. Place the turntable on a stable, level surface, away from speakers to prevent feedback.
Figura 4.1: superior view of the Pro-Ject T2 W Turntable.
4.2 Platter Installation
- Place the sub-platter onto the spindle.
- Carefully place the glass platter on top of the sub-platter.
- Position the felt mat on the glass platter.
Figure 4.2: Detail of the platter and spindle assembly.
4.3 Tonearm Balance and Tracking Force
- Gently remove the stylus protector.
- Attach the counterweight to the rear of the tonearm. Rotate it until the tonearm is balanced horizontally.
- Once balanced, set the tracking force by rotating the counterweight to the recommended setting for your cartridge (typically 1.8g - 2.0g for the pre-installed cartridge).
Figure 4.3: Tonearm counterweight for tracking force adjustment.
4.4 Anti-skating Adjustment
Attach the anti-skating weight to the small loop on the tonearm support. The recommended setting is usually aligned with the tracking force.
Figure 4.4: Tonearm headshell and cartridge detail.
4.5 Connexió a un sistema d'àudio
The T2 W offers both wired (RCA) and wireless (Wi-Fi) connectivity. Connect the included RCA phono cable to the L/R outputs on the back of the turntable and to your amplifier's phono input. For wireless connection, refer to the separate Wi-Fi setup guide or the Pro-Ject Connect app instructions.
Figure 4.5: Rear panel connections of the T2 W Turntable.
5. Instruccions de funcionament
5.1 Engegada/apagada
Connect the power supply to the turntable and a wall outlet. Use the power switch located on the underside of the plinth to turn the unit on or off.
Figure 5.1: Power switch location.
5.2 Selecting Playback Speed
The T2 W supports 33 1/3 and 45 RPM playback speeds. Use the speed selector switch, typically located on the plinth, to choose the appropriate speed for your record.
5.3 Reproduint un disc
- Posa un disc al plat.
- Select the correct playback speed.
- Aixequeu el braç fent servir la palanca de cueing.
- Col·loqueu el braç sobre la pista desitjada del disc.
- Lower the tonearm gently using the cueing lever.
- At the end of the record, lift the tonearm and return it to its rest.
6. Manteniment
6.1 Neteja del plat giratori
Use a soft, dry, anti-static cloth to clean the plinth and dust cover. For the platter, a slightly damp cloth can be used, ensuring no moisture enters the motor or electronics. Avoid harsh chemicals.
6.2 Cura del llapis òptic
Regularly clean the stylus using a dedicated stylus brush, brushing gently from back to front. Replace the stylus when signs of wear are apparent to prevent damage to your records.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so | Power not connected, amplifier input incorrect, cables loose, stylus protector still on. | Check power, select correct amplifier input, secure all cables, remove stylus protector. |
| So distorsionat | Tracking force incorrect, stylus dirty or worn, record dirty. | Adjust tracking force, clean or replace stylus, clean record. |
| La plataforma giratòria no gira | Power not connected, belt dislodged. | Check power, re-seat drive belt. |
| Soroll de brunzit | Grounding issue, proximity to other electronics. | Ensure proper grounding, move turntable away from interfering devices. |
8. Especificacions
- Model: T2 W
- Marca: Pro-Ject
- Dimensions del producte: 21.26 x 16.14 x 11.81 polzades
- Pes de l'article: 13.2 lliures (6 quilograms)
- Material: Fusta d'enginyeria
- Velocitat de rotació màxima: 45 RPM
- Consum d'energia (mode encès): 5 watts
- Dispositius compatibles: Amplifier, Audio System, Speaker
- Característica especial: Built-in Speaker (Note: This feature is listed in specifications but typically refers to an integrated phono stage or wireless capability, not an actual speaker for sound output from the turntable itself. Consult product details for clarification.)
9. Garantia i Suport
Pro-Ject Audio Systems products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Pro-Ject Audio Systems weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
For further assistance, you may contact your authorized Pro-Ject dealer or distributor.
