1. Producte acabatview
The HUPEJOS V80-4CH Suction Cup Mount is designed to provide a secure and adjustable attachment for your dash cam or similar device on a vehicle's windshield. Its robust vacuum-sealed design ensures stability, even during vehicle movement. This mount is engineered for quick, tool-free installation and can be removed and reused without leaving residue.
Característiques principals:
- Sturdy & Reliable Hold: High-quality, vacuum-sealed design for a tight grip on windshields.
- Instal·lació ràpida i fàcil: Tool-free setup; simply press, lock, and use.
- Removable & Reusable: Can be detached and reattached without leaving residue.
- Compatibilitat universal: Designed to fit most V8 Series dash cams (verify model compatibility).
- Compacte i de baix consumfile: Ensures a discreet and unobstructed view mentre condueix.
Image 1: HUPEJOS V80-4CH Suction Cup Mount. This image displays the HUPEJOS V80-4CH suction cup mount. It features a large circular suction base with a locking mechanism indicated by arrows and lock/unlock icons. Above the base, there's a ribbed adjustment ring and an arm extending to an adjustable cradle designed to hold a dash cam or similar device.
2. Configuració i instal·lació
Follow these steps for optimal installation of your suction cup mount:
- Netegeu la superfície: Ensure the windshield surface where you intend to mount the device is clean, dry, and free of dust or grease. For best results, use a glass cleaner and a lint-free cloth.
- Col·locació de la muntura: Place the suction cup firmly against the desired clean, smooth surface on your windshield.
- Engage the Lock: While pressing the suction cup against the surface, push down the lever or rotate the locking mechanism (as indicated by the arrows and lock icon on the base) to create a vacuum seal. This will secure the mount in place.
- Connecta el teu dispositiu: Secure your compatible dash cam or device into the adjustable cradle of the mount. Ensure it is firmly seated.
- Ajust d'angle: Adjust the angle of your device as needed for optimal viewing o gravació.
3. Instruccions de funcionament
Once installed, the HUPEJOS V80-4CH Suction Cup Mount operates passively by securely holding your dash cam. There are no electronic components or active controls on the mount itself. Its primary function is to maintain a stable position for your recording device.
- Comprovació d'estabilitat: Periodically check the mount's stability, especially after driving on rough roads or in extreme temperatures.
- Compatibilitat del dispositiu: Ensure your dash cam or device is compatible with the mount's cradle design for a secure fit.
4. Manteniment
Proper maintenance ensures the longevity and effectiveness of your suction cup mount.
- Neteja de la ventosa: If the suction cup loses its grip, remove it from the surface. Wash the suction cup with warm, soapy water. Rinse thoroughly and let it air dry completely before re-applying. Do not wipe with a cloth, as this can leave lint.
- Preparació de la superfície: Always ensure the mounting surface is clean and dry before re-attaching the mount.
- Emmagatzematge: When not in use for extended periods, store the mount in a cool, dry place away from direct sunlight. It is recommended to keep the suction cup covered to prevent dust accumulation.
5. Solució De Problemes
If you encounter issues with your HUPEJOS V80-4CH Suction Cup Mount, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Suction cup does not hold firmly. | Dirty or uneven mounting surface; dust on suction cup; extreme temperature changes. | Clean the windshield thoroughly. Wash the suction cup with warm, soapy water, rinse, and air dry. Ensure the surface is smooth and flat. Avoid mounting in direct sunlight for prolonged periods if possible. |
| Mount detaches during driving. | Improper installation; prolonged vibration; temperature fluctuations. | Re-install the mount following the steps in Section 2, ensuring a strong vacuum seal. Check the surface for cleanliness. |
| Device does not fit securely in the cradle. | Incompatible device model. | Verify your device's compatibility with the V8 Series mount. The mount is designed for specific dash cam models. |
6. Especificacions
| Atribut | Detall |
|---|---|
| Marca | HUPEJOS |
| Nom del model | V80-4CH |
| Tipus de muntatge | Muntatge de succió |
| Dispositius compatibles | Most V8 Series dash cams |
| Característica especial | Disseny compacte |
| Dimensions del producte | 3.86 x 0.8 x 2.76 cm |
| Pes de l'article | 30 g |
| Color | Negre |
7. Garantia i assistència
For information regarding warranty coverage or technical support for your HUPEJOS V80-4CH Suction Cup Mount, please refer to the documentation included with your purchase or visit the official HUPEJOS website. You may also contact HUPEJOS customer service directly for assistance with product inquiries, troubleshooting, or warranty claims.
Assistència en línia: Visit the HUPEJOS Store on Amazon
