Anern 10200W Hybrid Solar Inverter

1. Producte acabatview

The Anern 10200W Hybrid Solar Inverter is a high-performance device designed to efficiently convert solar energy into usable AC power for your home or business. It integrates a pure sine wave inverter, a 160A MPPT solar charge controller, and a battery charger into one compact unit. This inverter is compatible with various battery types and offers flexible operating modes to optimize energy usage.

Figure 1: Anern 10200W Hybrid Solar Inverter

Aquesta imatge mostra la part frontal view of the Anern 10200W Hybrid Solar Inverter, showcasinel seu disseny elegant i el panell de visualització integrat.

2. Informació de seguretat

Llegiu atentament totes les instruccions i advertències abans de la instal·lació i el funcionament. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o lesions greus.

• La instal·lació ha de ser realitzada per personal qualificat.
• Assegureu-vos que tot el cablejat estigui correctament dimensionat i connectat.
• Do not attempt to disassemble or repair the inverter. Contact qualified service personnel.
• Mantingueu l'inversor allunyat de materials inflamables, humitat i llum solar directa.
• Assegureu-vos una ventilació adequada al voltant de l'inversor per evitar el sobreescalfament.
• Always disconnect all power sources (PV, battery, and AC) before performing any maintenance or wiring.

3. Característiques del producte

• 10200W Solar Inverter 48VDC: 10.2KW Off Grid Solar Inverter 48Vdc to 230Vac with 160A MPPT Solar Charge Controller. Max PV input power: 10200W; PV operating voltage range: 90Vdc-450Vdc; Max.PV Array Open Circuit Voltage: 500Vdc; Max PV charging current: 130Amp; Rated output current: 44.3Amp; Max.PV Array Power: PV1 Channel: 5400W; PV2 Channel: 5400W; IMax.PV: PV1 Channel: 18A; PV2 Channel: 18A.
• Dual PV Input / Dual AC Output: The MAX 10.2kw dual input has two independent MPPTs, two circuits with a total of 36A, capable of connecting higher power solar modules. Dual Output - If there is no PV and grid feed-in and the battery voltage is too low, the primary circuit switches off and only the secondary output is maintained, similar to super power saving mode.
• Compatible with all types of batteries: The solar inverter is compatible with AGM, Gel, Lead-acid, Lithium, and Lithium Iron Phosphate batteries and supports battery-less operation mode. It supports solar, grid, or generator power for charging batteries. The inverter's charging and discharging time can be flexibly set.
• 4 Output Modes 3 Charging Modes: The solar inverter can set the battery charging current via the LCD display; 4 output modes: Solar Priority (SUB), Utility Priority (USB) and SBU mode, MKS. 3 charging modes to choose from: Solar First (CSO), Solar Only (OSO), Solar Mixed and Utility (SNU) for various applications.
• Protecció de càrrega segura: Features short circuit protection, overcurrent protection, overvoltage protection, undervoltage protection, overload protection, backfill protection, overtemperature protection, and overload protection. Comprehensive protection for safer and more secure charging.

4. Contingut del paquet

Verifiqueu que tots els elements estiguin inclosos al vostre paquet:

• Manual d'instruccions
• Mòdul WiFi

5. Components del producte

Familiarize yourself with the main components and connection points of the inverter:

Figure 2: Inverter Components Overview

This diagram illustrates the various components of the inverter, highlighting the LCD display for monitoring, touch buttons for control, and connection points for AC input, main and secondary AC outputs, PV inputs, battery connections, and the communication port for the WiFi module.

6. Configuració i instal·lació

6.1. Unboxing and Initial Setup (WiFi Module)

This video demonstrates the unboxing process and how to connect the WiFi module to your inverter for remote monitoring.

6.2. Connexions de cablejat

Follow these steps for proper and safe wiring of the inverter:

Figure 3: Inverter Wiring Diagram

This image provides a visual guide for connecting the solar panels to the PV input, the 48V battery bank, and the AC loads to the inverter's output. It also highlights recommended cable sizes and fuse ratings.

6.3. Starting the Inverter

Follow the correct sequence to power on your inverter:

• Assegureu-vos que totes les connexions de cablejat siguin segures i correctes.
• Turn on the battery switch first.
• Then, turn on the inverter's power switch.
• Allow the inverter to initialize. Once operational, you can connect AC and PV inputs.

7. Instruccions de funcionament

7.1. Understanding Display and Controls

The inverter features an intuitive LCD display and touch buttons for monitoring and configuration.

Figure 4: RGB Working Modes

The inverter features an RGB light indicator that changes color based on its operating mode: red for battery mode, blue for utility mode, and purple for PV mode. This provides a quick visual status of the inverter's power source.

7.2. Bateria Voltage Settings (Lithium)

To optimize performance and battery lifespan, you can adjust specific voltage parameters for lithium batteries:

• Item 05: "User-Defined" - Select this option for custom lithium battery settings.
• Item 26: Set charging protection voltage - Define the maximum voltage per carregar.
• Item 27: Set float charge voltage - Configure the voltage for maintaining a full charge.
• Item 29: Set discharge protection voltage - Set the minimum voltage before discharge cutoff.

7.3. Output and Charging Modes

The inverter offers various modes to suit different energy management strategies:

Figure 5: Output and Charging Modes

The inverter offers flexible operation with four output modes: Solar Priority (SUB), Utility Priority (USB), SBU mode, and MKS. It also provides three charging modes: Solar First (CSO), Solar Only (OSO), and Solar Mixed and Utility (SNU), allowing users to optimize energy flow based on their needs.

8. Pautes de manteniment

Regular maintenance ensures optimal performance and longevity of your inverter:

• Keep the inverter clean and free from dust.
• Assegureu-vos que hi hagi un flux d'aire adequat al voltant de la unitat.
• Periodically check all connections for tightness and signs of wear.
• Inspect the cooling fans for obstructions and proper operation.

Figure 6: Removable Dust Filter and Cooling Fans

The inverter is equipped with a removable dust filter to prevent dust-induced short circuits and intelligent cooling fans for efficient heat dissipation, ensuring long-term reliability. Regular cleaning of the dust filter is recommended.

9. Resolució de problemes comuns

Si teniu problemes, consulteu els següents problemes i solucions habituals:

• Sense potència de sortida: Check battery connections, input voltage, and ensure the inverter is turned on.
• Alarma de sobrecàrrega: Reduce the connected load. Ensure the total power consumption does not exceed the inverter's rated output.
• Alarma d'alta temperatura: Check for proper ventilation, clean dust filters, and ensure ambient temperature is within operating limits.
• Bateria baixa Voltage: Check battery charge level and charging sources (solar/utility).

Figura 7: Funcions de protecció integral

The inverter incorporates comprehensive protection mechanisms such as short-circuit, overcurrent, overvoltage, minvartage, overload, backfill, and overtemperature protection to ensure safe and reliable operation.

10. Especificacions tècniques

11. Garantia i atenció al client

Anern provides a 1-year warranty for this product. For technical support, troubleshooting, or warranty claims, please contact Anern customer service through the official channels. When contacting support, please provide your product model number and purchase details for faster assistance.

Per a més informació, visiteu el Anern Store.