POOLEX Spawer O'Spa 30 Heat Pump

Introducció

The POOLEX Spawer O'Spa 30 is an ultra-compact heat pump specifically designed for heating and cooling spa water. Utilizing full inverter technology, this heat pump intelligently adjusts its power output based on the heating or cooling demand, ensuring optimal energy efficiency and significant savings compared to traditional electric heaters. It is engineered to provide comfortable spa temperatures year-round, adapting to various climatic conditions.

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Spawer O'Spa 30 heat pump. Please read it thoroughly before using the product.

Instruccions de seguretat

• Desconnecteu sempre l'alimentació abans de realitzar qualsevol manteniment o servei.
• Ensure the unit is installed on a stable, level surface with adequate ventilation.
• Do not block the air inlets or outlets of the heat pump.
• Mantingueu els nens i les mascotes allunyats de la unitat durant el funcionament.
• Only qualified personnel should perform electrical connections and major repairs.
• Refer to local electrical codes and regulations for installation.

Configuració i instal·lació

Proper installation is crucial for the performance and longevity of your POOLEX Spawer O'Spa 30 heat pump.

1. Desembalatge

Carefully remove the heat pump from its packaging. Inspect the unit for any signs of damage during transit. Report any damage to your supplier immediately.

2. Col·locació

The heat pump should be installed outdoors, close to the spa, on a solid, level base. Ensure there is sufficient clear space around the unit for proper airflow and maintenance access. Avoid placing it in enclosed spaces or directly against walls that would obstruct air circulation.

Image: The POOLEX Spawer O'Spa 30 heat pump positioned next to a spa, demonstrating typical outdoor placement for optimal operation and accessibility.

Imatge: Un tancador view of the heat pump next to a spa, highlighting its compact size and how it integrates with the spa setup.

3. Connexions d'aigua

Connect the spa's water circulation system to the heat pump's inlet and outlet ports. Ensure all connections are secure and watertight. It is recommended to install bypass valves to isolate the heat pump for maintenance without draining the spa.

Imatge: Part posterior view of the heat pump, illustrating the blue-ringed ports for water inlet and outlet connections, crucial for integrating with the spa's plumbing system.

4. Connexió elèctrica

Connect the heat pump to a dedicated electrical circuit as per the specifications. Ensure the power supply matches the unit's requirements (DC power type). A qualified electrician should perform this step to ensure safety and compliance with local regulations.

The unit features a control panel for easy operation.

Imatge: Frontal view of the POOLEX Spawer O'Spa 30, showcasing the integrated control panel with buttons and display for user interaction.

Instruccions de funcionament

The Spawer O'Spa 30 is designed for user-friendly operation.

1. Encès / apagat

Press the power button on the control panel to turn the unit on or off. The display will illuminate when the unit is active.

2. Configuració de la temperatura

Use the up and down arrows on the control panel to adjust the desired spa water temperature. The display will show the current and target temperatures. The heat pump will automatically adjust its operation to reach and maintain the set temperature.

Image: The heat pump's display showing a temperature reading, indicating active operation and temperature monitoring.

3. Modes de funcionament

The Spawer O'Spa 30 features full inverter technology, allowing it to operate in both heating and cooling modes. It automatically adapts its power consumption to maintain the desired temperature, providing significant energy savings. This intelligent regulation prevents consumption peaks.

4. WLAN Connectivity

The unit supports WLAN connectivity, allowing for remote control and monitoring via a compatible mobile application. Refer to the separate WLAN setup guide for detailed instructions on connecting your device.

Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la bomba de calor.

1. Neteja

• Neteja exterior: Netegeu l'exterior casing amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Neteja de bobines: Periodically inspect the evaporator coils for dirt and debris. Gently clean with a soft brush or vacuum cleaner. Ensure the unit is powered off before cleaning.
• Airflow Obstruction: Regularly check that the air inlets and outlets are free from leaves, grass, or other obstructions.

2. Hivernació (per a climes freds)

If the heat pump will not be used during freezing temperatures, it is essential to winterize it to prevent damage:

1. Desconnecteu la font d'alimentació de la unitat.
2. Drain all water from the heat pump's plumbing to prevent freezing.
3. Cover the unit with a breathable, protective cover to shield it from harsh weather conditions.

Resolució de problemes

Aquesta secció ofereix solucions a problemes comuns que podeu trobar.

If the problem persists after attempting these solutions, please contact POOLEX customer support.

Especificacions

Garantia i Suport

For warranty information, please refer to the documentation provided with your purchase or visit the official POOLEX weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

For technical support, spare parts, or service inquiries, please contact POOLEX customer service. Contact details can typically be found on the manufacturer's website or your purchase invoice.

POOLEX Official Weblloc: www.poolex.fr (Note: This is a general link, specific support contact may vary by region.)