1. Producte acabatview
The SODOLA Gigabit Ethernet Media Converter is designed to convert electrical Ethernet signals to optical fiber signals, extending network reach over long distances. It supports 10/100/1000Base-Tx to 1000Base-LX conversion and includes a SingleMode Dual LC SFP module for distances up to 20 km.
Image 1.1: SODOLA Gigabit Ethernet Media Converter showing its compact design and key ports.
Imatge 1.2: acabatview of the SODOLA Gigabit Ethernet Media Converter highlighting its SFP and RJ45 ports.
2. Contingut del paquet
Verifiqueu que els elements següents estiguin inclosos al vostre paquet:
- 1 x Gigabit Ethernet Media Converter
- 1 adaptador de corrent (5V-1A)
- 1 Manual d'usuari
- 1 x SFP SingleMode Module (1.25G, 1310-nm, 20-km)
Imatge 2.1: Contingut inclòs al paquet del producte.
3. Instruccions de configuració
Follow these steps to set up your Gigabit Ethernet Media Converter:
- Connect the SFP Module: Insert the provided SFP SingleMode module into the SFP port of the media converter. Ensure it clicks into place securely.
- Connecteu el cable de fibra òptica: Connect a SingleMode Dual LC fiber optic cable to the SFP module. Ensure the connectors are clean and properly aligned.
- Connecteu el cable Ethernet: Connect a Cat.5e or Cat.6 UTP/STP Ethernet cable (up to 100m) from your network device (e.g., switch, router, PC) to the RJ-45 port of the media converter. The RJ-45 port supports auto-negotiation for 10/100/1000Mbps and MDI/MDI-X auto-crossover.
- Connectar l'alimentació: Plug the 5V-1A power adapter into the DC 5.5*2.5mm power input port on the media converter, then plug the adapter into a power outlet.
- Verifica les connexions: Check the LED indicators on the converter to ensure proper operation (refer to Section 4 for LED status).
Imatge 3.1: Detallada view of the Gigabit RJ45 Port, Gigabit SFP Port, LED Indicators, and Power Supply input.
Image 3.2: Typical application scenario demonstrating fiber to Ethernet conversion.
Image 3.3: Illustration of connecting the SFP module and RJ45 Ethernet cable.
4. Operating the Device and LED Indicators
The media converter operates automatically once powered on and connected. The LED indicators provide visual feedback on the device's status:
Image 4.1: Explanation of LED indicators on the media converter.
- PWR (potència):
- Verd (sòlid): DC Power is on.
- FDX (Full-Duplex):
- Verd (sòlid): Full-Duplex mode is active.
- 1000M (Gigabit Speed):
- Verd (sòlid): RJ-45 port speed is 1000Mbps.
- 100M (Fast Ethernet Speed):
- Verd (sòlid): RJ-45 port speed is 100Mbps.
- FIBER (Fiber Port Status):
- Verd (sòlid): Fiber port is working.
- Verd (parpellejant): Data is being transmitted/received (Transceive).
- TP (Twisted Pair/RJ45 Port Status):
- Verd (sòlid): Network connection is established.
- Verd (parpellejant): Data is being transmitted/received (Transceive).
5. Manteniment
To ensure optimal performance and longevity of your media converter:
- Mantingueu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de fonts de calor.
- Assegureu-vos una ventilació adequada al voltant de la unitat.
- Regularly inspect fiber optic connectors for dust or damage. Use appropriate fiber cleaning tools if necessary.
- Avoid bending fiber optic cables beyond their minimum bend radius.
- Use only the provided power adapter or a compatible 5V-1A DC power supply.
6. Solució De Problemes
If you encounter issues with your media converter, refer to the following common problems and solutions:
- Sense alimentació (LED PWR apagat):
- Check if the power adapter is securely connected to the converter and the power outlet.
- Comproveu que la presa de corrent funcioni.
- No Link on RJ-45 Port (TP LED Off/Not Flashing):
- Ensure the Ethernet cable is properly connected to both the converter and the network device.
- Verify the Ethernet cable is not damaged and is a Cat.5e or Cat.6 cable.
- Check the status of the connected network device (e.g., switch port, PC network adapter).
- No Link on Fiber Port (FIBER LED Off/Not Flashing):
- Ensure the SFP module is fully inserted into the converter.
- Check the fiber optic cable for proper connection, cleanliness, and damage.
- Verify the fiber optic cable type (SingleMode Dual LC) matches the SFP module.
- Assegureu-vos que el dispositiu de fibra remot estigui encès i funcioni correctament.
- Slow Speed (1000M LED Off, 100M LED On):
- Ensure the connected Ethernet device supports Gigabit speeds.
- Check the Ethernet cable for quality; a damaged or low-quality cable can limit speed.
7. Especificacions
Detailed technical specifications for the SODOLA Gigabit Ethernet Media Converter:
Image 7.1: Product dimensions and a summary of key specifications.
| Característica | Especificació |
|---|---|
| Número de model | SL-SG0101-SFPK2 |
| Port de fibra | SFP (1.25G, SingleMode, 1310-nm, Dual LC) |
| Distància de fibra | Fins a 20 km |
| UTP Port | RJ-45 10/100/1000Mbps (Auto-negotiation, MDI/MDI-X) |
| UTP/STP Cable | Cat.5e or Cat.6, up to 100m |
| Velocitat de transferència de dades | 1000 Megabits Per Second (2000Mbps Full-Duplex) |
| Protocol d'enllaç de dades | IEEE 802.3 |
| Font d'alimentació | DC 5V-1A (5.5*2.5mm) |
| Pes de l'article | 10.5 unces (0.3 quilograms) |
| Dimensions del paquet | 6.42 x 4.72 x 1.85 polzades |
| Temperatura de funcionament | 0 ~ 60 °C |
8. Garantia i Suport
The included SFP SingleMode transceiver comes with a one-year replacement warranty for any quality issues. For further assistance, technical support, or warranty claims, please contact Sodola customer service through the retailer where the product was purchased or visit the official Sodola weblloc per obtenir informació de contacte.
