Introducció
Thank you for choosing the Grundig Wireless LED Spot Lights. This 4-pack of battery-operated LED lights offers versatile and convenient illumination for various indoor spaces. Featuring multi-color options, a timer function, and remote control operation, these lights are designed for easy installation and use. Please read this manual carefully before installation and operation to ensure proper use and longevity of your product.
Informació de seguretat
- Mantenir fora de l'abast dels nens i mascotes.
- No barregeu piles velles i noves, o diferents tipus de piles.
- Insert batteries with correct polarity (+/-). Incorrect insertion can cause damage.
- Traieu les piles si el producte no s'utilitza durant un període prolongat.
- Do not expose the lights to extreme temperatures, direct sunlight, or moisture.
- Aquest producte només és per a ús interior.
- Do not attempt to disassemble or modify the lights or remote control.
- Eliminar les bateries usades d'acord amb la normativa local.
Contingut del paquet
Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:
- 4x Grundig Wireless LED Spot Lights
- 1x comandament a distància
- 1x Adhesive Mounting Tape (for all 4 lights)
Imatge: Més deview of the Grundig Wireless LED Spot Lights package, including four lights, a remote control, and a "color changing" graphic.
Configuració
1. Instal·lació de la bateria
- Gently twist the back cover of each LED spot light counter-clockwise to open the battery compartment.
- Insert 3x AAA batteries (not included) into each spot light, ensuring correct polarity (+/-).
- Replace the back cover by twisting it clockwise until securely closed.
- For the remote control, slide open the battery compartment cover on the back. Insert 1x CR2025 battery (typically included, but verify) with correct polarity. Close the cover.
Image: A single Grundig LED spot light, illustrating the light output. The battery compartment is on the reverse side.
2. Muntatge dels llums
- Clean the surface where you intend to mount the lights. Ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the adhesive mounting tape.
- Apply the adhesive tape firmly to the back of the LED spot light.
- Peel off the protective film from the other side of the adhesive tape.
- Press the LED spot light firmly onto the desired surface for at least 30 seconds.
- Repeat for all four lights.
Image: Grundig LED spot lights installed on furniture, demonstrating their wireless nature and adhesive mounting capability.
Instruccions de funcionament
The Grundig Wireless LED Spot Lights are controlled using the included remote control.
Funcions de control remot:
- ON/OFF: Premeu el botó ON botó per encendre els llums i el OFF botó per desactivar-los.
- Ajust de brillantor: Use the brightness buttons (often represented by sun icons or up/down arrows) to increase or decrease the light intensity.
- Selecció de color: Press any of the colored buttons (e.g., Red, Green, Blue, White, etc.) to change the light color.
- Multi Color (Mode): Press the "Multi Color" or "Mode" button to cycle through various color-changing modes or effects.
- Funció de temporitzador:
- Premeu el botó 4H button to set the lights to automatically turn off after 4 hours.
- Premeu el botó 8H button to set the lights to automatically turn off after 8 hours.
- Per desactivar el temporitzador, premeu el botó OFF button or turn the lights on again manually.
Image: The remote control for the Grundig LED spot lights, showing buttons for power, timer, brightness, and multiple color options.
Manteniment
- Neteja: Wipe the lights and remote control with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Substitució de la bateria: When the lights dim or the remote control becomes unresponsive, replace the batteries in the respective devices following the "Battery Installation" steps.
- Emmagatzematge: If storing the lights for an extended period, remove all batteries to prevent leakage and corrosion.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Els llums no s'encenen. |
|
|
| El comandament a distància no respon. |
|
|
| Lights dim or flicker. |
|
|
Especificacions
| Marca | Grundig |
| Número de model | 8711252244907 |
| Dimensions del producte (L x A x A) | 7 x 7 x 2.5 cm (each light) |
| Pes de l'article | 123 g (total for 4 lights, approximate) |
| Nombre d'articles | 4 |
| Color | White (housing) / Multi-color (LED) |
| Forma | Ronda |
| Material | Poliestirè (PS) |
| Font d'alimentació | Battery Powered (3x AAA per light, 1x CR2025 for remote) |
| Voltage | 1.5 Volts (per battery, total 4.5V per light) |
| Tipus de bombeta | LED |
| Característiques especials | Remote Control, Timer Function, Multi-color |
| Tipus d'instal·lació | Adhesive Mount (Ceiling, Wall, Cabinet) |
| País d'origen | Xina |
Garantia i Suport
Specific warranty information for this product is not available in the provided data. For warranty claims or technical support, please refer to the retailer's return policy or contact Grundig customer service directly through their official weblloc web o el punt de compra.
Si us plau, conserveu el comprovant de compra per a qualsevol consulta relacionada amb la garantia.





